The Starbug technology(1) developed by AAO-MQ allows fibre positioners to be built with large multiplexing capabilities. The Starbug robots are positionable individually and in parallel, which results in significant configuration time improvements over what can be achieved by single-arm pick and place robots. Their design allows the Starbugs to carry a complex payload, and their movement mechanism and vacuum adhesion to the instrument's glass field plate at the telescope's focal plane means that they can be used to position fibres on a non-planar surface.

The 2dFdr fibre MOS reduction package originated with the original 2dF instrument (Lewis et al. 2002) and its original spectrograph in the mid 1990s. As the 2dF instrument has been upgraded with new spectrographs and features through its 20 years of life to address new science roles, so has 2d.Fdr. Originally designed to reduce spectra for the 2dF Galaxy redshift survey on what is now considered very slow hardware, it is now reducing spectra from the AAT's AAOmega Spectrograph to the dramatically higher quality required for surveys such as SAMI (Bryant et al. 2015) and OzDES (Yuan et al. 2015), as well as reducing data from KOALA and HERMES and the soon to be commissioned TAIPAN instrument. We examine some of the more significant recent improvements and the quality of the results from the current version.

We present a methodology for the regularization and combination of sparse sampled and irregularly gridded observations from fibre-optic multiobject integral field spectroscopy. The approach minimizes interpolation and retains image resolution on combining subpixel dithered data. We discuss the methodology in the context of the Sydney–AAO multiobject integral field spectrograph (SAMI) Galaxy Survey underway at the Anglo-Australian Telescope. The SAMI instrument uses 13 fibre bundles to perform high-multiplex integral field spectroscopy across a 1° diameter field of view. The SAMI Galaxy Survey is targeting ∼3000 galaxies drawn from the full range of galaxy environments. We demonstrate the subcritical sampling of the seeing and incomplete fill factor for the integral field bundles results in only a 10 per cent degradation in the final image resolution recovered. We also implement a new methodology for tracking covariance between elements of the resulting data cubes which retains 90 per cent of the covariance information while incurring only a modest increase in the survey data volume.

The High Efficiency and Resolution Multi Element Spectrograph, HERMES, was an approximately $12 million dollar project to provide a new facility class instrument for the Anglo-Australian Telescope (AAT). It was commissioned in Q4 2013. This paper examines how software challenges presented by HERMES were handled, including: minimizing cost through reusing the existing AAT 2dF/AAOmega facility software as far as possible; using instrument and data simulators to ensure new software was almost ready before any hardware had been seen; extensive upgrading of our fiber data reduction software; dealing with the tighter calibration and alignment tolerances of a high-resolution spectrograph.

The High Efficiency and Resolution Multi Element Spectrograph, HERMES, is a facility-class optical spectrograph for the Anglo-Australian Telescope (AAT). It is designed primarily for Galactic Archaeology, the first major attempt to create a detailed understanding of galaxy formation and evolution by studying the history of our own galaxy, the Milky Way. The goal of the GALAH survey is to reconstruct the mass assembly history of the Milky Way through a detailed chemical abundance study of one million stars. The spectrograph is based at the AAT and is fed by the existing 2dF robotic fiber positioning system. The spectrograph uses volume phase holographic gratings to achieve a spectral resolving power of 28,000 in standard mode and also provides a high-resolution mode ranging between 40,000 and 50,000 using a slit mask. The GALAH survey requires an SNR greater than 100 for a star brightness of V ?= 14 in an exposure time of one hour. The total spectral coverage of the four channels is about 100 nm between 370 and 1000 nm for up to 392 simultaneous targets within the 2-degree field of view. HERMES has been commissioned over three runs, during bright time in October, November, and December 2013, in parallel with the beginning of the GALAH pilot survey, which started in November 2013. We present the first-light results from the commissioning run and the beginning of the GALAH survey, including performance results such as throughput and resolution, as well as instrument reliability.

The AAO's HERMES spectrograph will start operation in 2013. Its primary project will be a Galactic Archaeology survey that aims to reconstruct the early history of our Galaxy through precise measurements of the chemical abundances of one million stars. This paper describes some of the software aspects of the HERMES project: how it has evolved from the earlier AAO 2dF system, the extensive use of simulation for testing, the overall observing system, and the data reduction pipeline.

We present the first scientific results from the Sydney-AAO Multi-Object IFS (SAMI) at the Anglo-Australian Telescope. This unique instrument deploys 13 fused fiber bundles (hexabundles) across a one-degree field of view allowing simultaneous spatially resolved spectroscopy of 13 galaxies. During the first SAMI commissioning run, targeting a single galaxy field, one object (ESO 185-G031) was found to have extended minor axis emission with ionization and kinematic properties consistent with a large-scale galactic wind. The importance of this result is twofold: (1) fiber bundle spectrographs are able to identify low surface brightness emission arising from extranuclear activity and (2) such activity may be more common than presently assumed because conventional multi-object spectrographs use single-aperture fibers and spectra from these are nearly always dominated by nuclear emission. These early results demonstrate the extraordinary potential of multi-object hexabundle spectroscopy in future galaxy surveys.

SAMI (Sydney-AAO Multi-object Integral field spectrograph) has the potential to revolutionise our understanding of galaxies, with spatially-resolved spectroscopy of large numbers of targets. It is the first on-sky application of innovative photonic imaging bundles called hexabundles, which will remove the aperture effects that have biased previous single-fibre multi-object astronomical surveys. The hexabundles have lightly-fused circular multi-mode cores with a covering fraction of 73%. The thirteen hexabundles in SAMI, each have 61 fibre cores, and feed into the AAOmega spectrograph at the Anglo-Australian Telescope (AAT). SAMI was installed at the AAT in July 2011 and the first commissioning results prove the effectiveness of hexabundles on sky. A galaxy survey of several thousand galaxies to z 0.1 will begin with SAMI in mid-2012.

The High Efficiency and Resolution Multi Element Spectrograph, HERMES is an optical spectrograph designed primarily for the GALAH, Galactic Archeology Survey, the first major attempt to create a detailed understanding of galaxy formation and evolution by studying the history of our own galaxy, the Milky Way1. The goal of the GALAH survey is to reconstruct the mass assembly history of the of the Milky way, through a detailed spatially tagged abundance study of one million stars in the Milky Way. The spectrograph will be based at the Anglo Australian Telescope (AAT) and be fed with the existing 2dF robotic fibre positioning system. The spectrograph uses VPH-gratings to achieve a spectral resolving power of 28,000 in standard mode and also provides a high resolution mode ranging between 40,000 to 50,000 using a slit mask. The GALAH survey requires a SNR greater than 100 aiming for a star brightness of V=14. The total spectral coverage of the four channels is about 100nm between 370 and 1000nm for up to 392 simultaneous targets within the 2 degree field of view. Current efforts are focused on manufacturing and integration. The delivery date of spectrograph at the telescope is scheduled for 2013. A performance prediction is presented and a complete overview of the status of the HERMES spectrograph is given. This paper details the following specific topics: The approach to AIT, the manufacturing and integration of the large mechanical frame, the opto-mechanical slit assembly, collimator optics and cameras, VPH gratings, cryostats, fibre cable assembly, instrument control hardware and software, data reduction.

We demonstrate a novel technology that combines the power of the multi-object spectrograph with the spatial multiplex advantage of an integral field spectrograph (IFS). The Sydney-AAO (Australian Astronomical Observatory) Multi-object IFS (SAMI) is a prototype wide-field system at the Anglo-Australian Telescope (AAT) that allows 13 imaging fibre bundles ('hexabundles') to be deployed over a 1-degree diameter field of view. Each hexabundle comprises 61 lightly fused multi-mode fibres with reduced cladding and yields a 75 per cent filling factor. Each fibre core diameter subtends 1.6 arcsec on the sky and each hexabundle has a field of view of 15 arcsec diameter. The fibres are fed to the flexible AAOmega double-beam spectrograph, which can be used at a range of spectral resolutions (R = lambda/delta lambda approximate to 1700-13 000) over the optical spectrum (3700-9500 angstrom). We present the first spectroscopic results obtained with SAMI for a sample of galaxies at z approximate to 0.05. We discuss the prospects of implementing hexabundles at a much higher multiplex over wider fields of view in order to carry out spatially resolved spectroscopic surveys of 10(4)-10(5) galaxies.