To determine body image perception in sorority and non-sorority females (18-24 years of age) at East Tennessee State University.

Garbage collection is one of major reason for performance degradation on Android OS. Escape analysis can be one of techniques to prevent performance degradation and Google has tried to implement scalar replacement through the escape analysis. But it does not become Android default functionality. This paper took it and compared with our proposed stack allocation method. The experimental result shows scalar replacement has no effect at all but stack allocation produce effective results. The CaffeinMark benchmark also shows no performance degradation in spite of additional instructions.

Pure MgO powders were synthesized using wet chemical and thermal processes. Purity and crystallinity were used as indicators determining the synthesis. From this, we obtained highly pure and crystalline MgO powders. Using these powders, we could achieve 15∼20V lower firing voltage and 10∼15% higher efficiency, depending on the extent of the partly covered area and on sealing temperature. The improvement was proved to be due to surface states that were absent in an MgO film.

An effective debugging method for the development of Android smartphone is essential for enhancing productivity and marketability. Until now, however, Android kernel debugging methods have had too much dependency on hardware based debugging method which is expensive and complex to set up with even slow serial connection. To solve these problems, we have modified the existing android debugging architecture and have designed a new integrated debugging architecture which modifies the internal of KGDB for Android kernel. As a result, we have showed it adopts well with various Android smartphones through fast USB connection instead of the slow serial connection. This has improved the productivity in development of Android smartphone. By using this new debugging method, even common users can perform kernel debugging and redistribute the kernel easily.

이 연구에서는 숏크리트에 적용하기 위한 고분말도 시멘트의 기본 특성을 검토하고자 하였다. 고분말 시멘트의 주요특성을 연구하기 위하여 입도분포, 응결시간, 압축강도를 측정하였으며, SEM 관찰, DSC 열분석, X선 회절분석을 실시하였다. 고분말도 시멘트는 일반 포틀랜드 시멘트와 비교하여 응결시간이 크게 단축되었으며 압축강도가 개선되었다. 기기분석 결과 고분말도 시멘트는 초기수화물이 보다 미세하고 광범위하게 분포하는 것으로 확인되었으며, 이러한 결과는 시멘트의 분말도가 상승함에 따라 시멘트 입자와 물과의 접촉면이 증가하기 때문이다. SEM 관찰, DSC 열분석, X선 회절분석 결과 알루미네이트계 급결제는 칼슘알루미늄 수화물의 생성을 촉진하고, 알칼리프리계 급결제는 에트린자이트와 모노설페이트의 생성을 증진하는 것으로 나타났다. 페이스트 응결시간 측정으로부터 알루미네이트계 급결제와 알칼리프리계 급결제가 응결시간을 단축시키는 것으로 확인되었으며, 고분말도 시멘트는 압축강도가 크게 향상되는 것으로 나타났다. 특히 알루미네이트계 급결제는 응결시간 단축에 효과적이며, 알칼리프리계 급결제는 7일 이후의 강도증진에 효과적인 것으로 확인되었다.

We have prepared two kinds of panels with a change in the sealing atmosphere. for this, air and nitrogen gas were used, respectively. The discharge voltages, Vfxy and Vfay, for the panel sealed in nitrogen gas were 35V and 30V lower, respectively, than those for the panel sealed in air. Moreover, long‐term operation drifts in brightness, discharge voltage and delay time were considerably reduced. In order to find probable explanations to the differences caused by the sealing atmosphere, the protective layers were examined with analysis tools like SEM, CL and XPS. From this analysis, no clear explanation was obtained.

Fluconazole is used as an orally administrated antifungal drug for the treatment of tinea corporis, candidiasis including skin mycotic pneumonia infections. The dosage of fluconazole varies with indication ranging from 50 mg/day to 400 mg/day. The fluconazole capsule 50 mg (3 capsules daily) is already available in Korean market. To improve the patient compliance, a fluconazole tablet 150 mg (once a day administration) was developed recently. The purpose of this study was to evaluate the bioequivalence of three doses of fluconazole capsule 50 mg (Diflucan 50 mg, Pfizer Korea Inc., as a reference drug) and a single dose of fluconazole tablet 150 mg (Plunazol 150 mg, Daewoong Pharm. Co., Korea) according to the guidelines of the Korea Food and Drug Administration (KFDA). The bioequivalence for three capsules of Diflucan 50 mg and a single tablet of Plunazol 150 mg was investigated in twenty-four healthy male volunteers under a randomized 22 crossover trial design. The average age of twenty-four volunteers was 24.783.27 year-old, average height was 175.565.45 cm and average weight was 67.246.86 kg. After three capsules of Diflucan 50 mg or a single tablet of Plunazol 150 mg were orally administered, blood was taken at predetermined time intervals and the plasma concentrations of fluconazole in plasma were determined using LC-MS-MS. The 90% confidence intervals for the main parameters of statistical results after logarithmic transformation were AUCt 0.9272-1.0084 and Cmax 0.8423-0.9544 respectively, which are in the range of log 0.8 to log 1.25 and the statistical results of additional parameters (AUClast, t1/2 and MRT) were also in the 90% confidence interval that is in the range of log 0.8 to log 1.25. Therefore, the results of this study confirm the bioequivalence of three capsules of Diflucan 50 mg to one tablet of Plunazol 150 mg.

The microstructural and texture evolution of MgO protective films deposited on Si and glass substrates by ebeam evaporation were investigated. MgO films on both types of substrates consisted of a well developed columnar structure showing <111> texture in the cross sectional view and a triangle shape in the plane view. It was found that there is amorphous MgO between each columnar, which occupies 8–25% in the MgO films. The electron energy loss spectroscopy (EELS) spectrum of amorphous MgO showed features of chemical states and electronic structures different from those of crystalline MgO.