The magnetic properties of hole quantum dots in Ge are sensitive to their shape due to the interplay between strong spin-orbit coupling and confinement. We show that the split-off band, surrounding SiGe layers, and hole-hole interactions have a strong influence on calculations of the effective g factor of a lithographic quantum dot in a Ge/SiGe heterostructure. Comparing predictions from a model including these effects to raw magnetospectroscopy data, we apply maximum-likelihood estimation to infer the shape of a quantum dot with up to four holes. We expect that methods like this will be useful in assessing qubit-to-qubit variability critical to further scaling quantum computing technologies based on spins in semiconductors.

Recently, lithographic quantum dots in strained-Ge/SiGe have become a promising candidate for quantum computation, with a remarkably quick progression from demonstration of a quantum dot to qubit logic demonstrations. Here we present a measurement of the out-of-plane $g$-factor for single-hole quantum dots in this material. As this is a single-hole measurement, this is the first experimental result that avoids the strong orbital effects present in the out-of-plane configuration. In addition to verifying the expected $g$-factor anisotropy between in-plane and out-of-plane magnetic ($B$)-fields, variations in the $g$-factor dependent on the occupation of the quantum dot are observed. These results are in good agreement with calculations of the $g$-factor using the heavy- and light-hole spaces of the Luttinger Hamiltonian, especially the first two holes, showing a strong spin-orbit coupling and suggesting dramatic $g$-factor tunability through both the $B$-field and the charge state.

Hole spin qubits confined to lithographically - defined lateral quantum dots in Ge/SiGe heterostructures show great promise. On reason for this is the intrinsic spin - orbit coupling that allows all - electric control of the qubit. That same feature can be exploited as a coupling mechanism to coherently link spin qubits to a photon field in a superconducting resonator, which could, in principle, be used as a quantum bus to distribute quantum information. The work reported here advances the knowledge and technology required for such a demonstration. We discuss the device fabrication and characterization of different quantum dot designs and the demonstration of single hole occupation in multiple devices. Superconductor resonators fabricated using an outside vendor were found to have adequate performance and a path toward flip-chip integration with quantum devices is discussed. The results of an optical study exploring aspects of using implanted Ga as quantum memory in a Ge system are presented.

Scanning tunneling microscope lithography can be used to create nanoelectronic devices in which dopant atoms are precisely positioned in a Si lattice within $\sim$1 nm of a target position. This exquisite precision is promising for realizing various quantum technologies. However, a potentially impactful form of disorder is due to incorporation kinetics, in which the number of P atoms that incorporate into a single lithographic window is manifestly uncertain. We present experimental results indicating that the likelihood of incorporating into an ideally written three-dimer single-donor window is $63 \pm 10\%$ for room-temperature dosing, and corroborate these results with a model for the incorporation kinetics. Nevertheless, further analysis of this model suggests conditions that might raise the incorporation rate to near-deterministic levels. We simulate bias spectroscopy on a chain of comparable dimensions to the array in our yield study, indicating that such an experiment may help confirm the inferred incorporation rate.

quantum dot as well as coupling between two adjacent quantum dots. The hole effective mass in these undoped structures, m* ~ 0.08 m 0, is significantly lower than for electrons in Si/SiGe, pointing to the possibility of enhanced tunnel couplings in quantum dots and favorable qubit–qubit interactions in an industry-compatible semiconductor platform.

Lithographic quantum dots (QDs) are highly controllable few-level quantum systems created in semiconductor nanoelectronic devices, with a variety of scientific applications. These include technologically-driven applications like quantum computing and more fundamental applications in which they serve as a platform for exploring basic many-body physics. This document is a brief summary of my Ph.D. research so far and the directions with which I intend to continue it. Highlights include theoretical efforts to understand and design qubits in germanium hole QDs, as well as explorations of the possibility of using QDs coupled to nearby baths for analog simulation of quantum impurity models.

Analog quantum simulation is an approach for studying physical systems that might otherwise be computationally intractable to simulate on classical high-performance computing (HPC) systems. The key idea behind analog quantum simulation is the realization of a physical system with a low-energy effective Hamiltonian that is the same as the low-energy effective Hamiltonian of some target system to be studied. Purpose-built nanoelectronic devices are a natural candidate for implementing the analog quantum simulation of strongly correlated materials that are otherwise challenging to study using classical HPC systems. However, realizing devices that are sufficiently large to study the properties of a non-trivial material system (e.g., those described by a Fermi-Hubbard model) will eventually require the fabrication, control, and measurement of at least 0(10) quantum dots, or other engineered quantum impurities. As a step toward large-scale analog or digital quantum simulation platforms based on nanoelectronic devices, we propose a new approach to analog quantum simulation that makes use of the large Hilbert space dimension of the electronic baths that are used to adjust the occupancy of one or a few engineered quantum impurities. This approach to analog quantum simulation allows us to study a wide array of quantum impurity models. We can further augment the computational power of such an approach by combining it with a classical computer to facilitate dynamical mean-field theory (DMFT) calculations. DMFT replaces the solution of a lattice impurity problem with the solution of a family of localized impurity problems with bath couplings that are adjusted to satisfy a self-consistency condition between the two models. In DMFT, the computationally challenging task is the high-accuracy solution of an instance of a quantum impurity model that is determined self-consistently in coordination with a mean-field calculation. We propose using one or a few engineered quantum impurities with adjustable couplings to baths to realize an analog quantum coprocessor that effects the solution of such a model through measurements of a physical quantum impurity, operating in coordination with a classical computer to achieve a self-consistent solution to a DMFT calculation. We focus on implementation details relevant to a number of technologies for which Sandia has design, fabrication, and measurement expertise. The primary technical advances outlined in this report concern the development of a supporting modeling capability. As with all analog quantum simulation platforms, the successful design and operation of individual devices depends critically on one's ability to predict the effective low-energy Hamiltonian governing its dynamics Our project has made this possible and lays the foundation for future experimental implementations.

In the field of semiconductor quantum dot spin qubits, there is growing interest in leveraging the unique properties of hole-carrier systems and their intrinsically strong spin-orbit coupling to engineer novel spin qubits. In contrast to the weak spin-orbit interaction found in Si, strong spin-orbit coupling in Ge may allow purely electrical spin control using the electric field component of a microwave drive signal applied to a confinement gate, without the need for additional components such as microwave stripline antennas or micromagnets. A crucial aspect in the search for alternative semiconductor qubit host materials is the need to maintain the advantages of existing platforms such as Si: low disorder, long coherence times, extensibility, and semiconductor foundry compatibility. Recent advances in semiconductor heterostructure growth have made available high quality, undoped Ge/SiGe quantum wells that can serve as hosts for hole spin qubits. These quantum wells consist of a pure strained Ge layer flanked by Ge-rich SiGe layers above and below, grown by reduced pressure chemical vapor deposition. Isotopic enrichment is possible if required. The heavy hole charge carriers are characterized by a small effective mass m* ~ 0.08m 0 (about 2.4x lighter than for electrons in Si), high mobility μ ≥ 1E5 cm2/Vs, and highly anisotropic g-factors. The small effective mass should allow relatively large and easily-coupled quantum dots. The next-nearest light hole band is theoretically predicted to be on the order of ~ 100 meV below the heavy hole band. The p-orbital character of the hole wavefunction may provide an advantage in minimizing contact hyperfine interactions with nonzero-spin lattice nuclei. There is both theoretical and experimental evidence of a cubic Rashba-type spin-orbit interaction in this material, whose large strength is manifest as a spin-orbit length on the order of 1 micrometer. An additional advantage over Si is that the two-dimensional band structure of Ge quantum wells does not feature valley states, which can present difficulties for qubit operations. Here, we will describe our ongoing efforts to prepare spin qubits in this platform, including development of gated device architectures, device tuning protocols, and charge-sensing capabilities. Initial work focused on single-layer gate layouts, in which lithographically-defined single and double quantum dots were demonstrated at dilution refrigerator temperatures. Charging energies of ~ 1.7 meV were observed. These devices featured a broad and shallow potential landscape, and only a small number of holes could be confined to a quantum dot. Although adjacent quantum dots could be coupled to one another, this coupling was not easily tuned using this gate design. These limitations in the confinement and control of quantum dots motivated the subsequent adoption of multilayer gate-stack architectures, similar to what has been demonstrated in Si. Our three-layer devices feature gate electrodes designed for accumulation of holes, local depletion to form quantum dots, and selective isolation/screening of electric fields. Device structures feature Ti/Pt gates, ALD oxide dielectrics, and implanted ohmic contacts. Symmetrically constructed devices comprise two gated channels for quantum dot confinement, one to be used as the quantum dot under study and the other operated as a local charge sensor. By monitoring the conductance of the charge sensor as the quantum dot is tuned, we can remotely determine the dot’s occupation number, in principle down to the last hole. Iterative cycles of device fabrication and measurement, combined with numerical modeling, have allowed continuous improvements to the device design. Early three-layer device designs suffered from poor isolation between the upper and lower mirror-symmetric device channels. Numerical modeling showed (and measurements have confirmed) that an additional isolation gate could allow improved autonomy of the two channels while maintaining their electrostatic coupling needed for charge sensing. Ongoing, simulation-informed work to fine-tune the device geometry, as well as efforts toward a qubit demonstration, will be discussed. This work was funded, in part, by the Laboratory Directed Research and Development Program and performed, in part, at the Center for Integrated Nanotechnologies, an Office of Science User Facility operated for the US Department of Energy (DOE) Office of Science. Sandia National Laboratories is a multi-mission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the US Department of Energy’s National Nuclear Security Administration under contract DE-NA-0003525. The views expressed in this article do not necessarily represent the views of the US Department of Energy or the United States Government. The work at NTU was supported by the Ministry of Science and Technology (107-2622-8-002-018-). Figure 1