The world's energy consumption and power generation demand will continue to rise.Furthermore, the bulk of the energy resources needed to satisfy the rising demand is far from the load centers.The aforementioned requires long-distance transmission systems and one way to accomplish this is to use high voltage direct current (HVDC) transmission systems.The main technical issues for HVDC transmission systems are loss of synchronism, variation of quadrature currents, amplitude, the inability of station 1 (rectifier), and station 2 (inverter) to either inject, or absorb active, or reactive power in the network in any circumstances (before a fault occurs, during having a fault in network and after a fault cleared), and the variations of power transfer capabilities.Additionally, faults impact power quality such as voltage dips and power line outage time.This paper presents a method of overcoming the aforementioned technical issues using voltage-source converter (VSC) based HVDC transmission systems with SCADA VIEWER software and dynamic grid simulator.The benefits include having a higher capacity transmission system and proposed best method for control of active and reactive power transfer capabilities.Simulation results obtained using MATLAB validated the experimental results from SCADA Viewer software.The results indicate that the station's rectifier or inverter can either inject or absorb either active power or reactive power in any circumstance.Also, the reverse power flow under different modes of operation can ride through faults.At a 100.0%power transfer rate, the rectifier injected 775.0 W into the network.At a 0.0% power transfer rate, the rectifier injected 164.0 W into the network.At a -100.0%rated power, the rectifier injected 1264.0W into the network and direction was also changed.

In recent years, several factors such as environmental pollution, declining fossil fuel supplies, and product price volatility have led to most countries investing in renewable energy sources. In particular, the development of photovoltaic (PV) microgrids, which can be standalone, off-grid connected or grid-connected, is seen as one of the most viable solutions that could help developing countries such as Rwanda to minimize problems related to energy shortage. The country's current electrification rate is estimated to be 59.7%, and hydropower remains Rwanda's primary source of energy (with over 43.8% of its total energy supplies) despite advances in solar technology. In order to provide affordable electricity to low-income households, the government of Rwanda has pledged to achieve 48% of its overal electrification goals from off-grid solar systems by 2024. In this paper, we develop a cost-effective power generation model for a solar PV system to power households in rural areas in Rwanda at a reduced cost. A performance comparison between a single household and a microgrid PV system is conducted by developing efficient and low-cost off-grid PV systems. The battery model for these two systems is 1.6 kWh daily load with 0.30 kW peak load for a single household and 193.05 kWh/day with 20.64 kW peak load for an off-grid PV microgrid. The hybrid optimization model for electric renewable (HOMER) software is used to determine the system size and its life cycle cost including the levelized cost of energy (LCOE) and net present cost (NPC) for each of these power generation models. The analysis shows that the optimal system's NPC, LCOE, electricity production, and operating cost are estimated to 1,166,898.0 USD, 1.28 (USD/kWh), 221, and 715.0 (kWh per year, 37,965.91 (USD per year), respectively, for microgrid and 9284.4(USD), 1.23 (USD/kWh), and 2426.0 (kWh per year, 428.08 (USD per year), respectively, for a single household (standalone). The LCOE of a standalone PV system of an independent household was found to be cost-effective compared with a microgrid PV system that supplies electricity to a rural community in Rwanda.

The energy sector of today’s Rwanda has made a remarkable growth to some extent in recent years. Although Rwanda has natural energy resources (e.g., hydro, solar, and methane gas, etc.), the country currently has an installed electricity generation capacity of only 226.7 MW from its 45 power plants for a population of about 13 million in 2021. The current national rate of electrification in Rwanda is estimated to 54.5% (i.e.; 39.7% grid-connected and 14.8% off-grid connected systems). This clearly demonstrates that having access to electricity is still a challenge to numerous people not to mention some blackout-related problems. With the ambition of having electricity for all, concentrated solar power (CSP) and photovoltaic (PV) systems are regarded as solutions to the lack of electricity. The production of CSP has still not been seriously considered in Rwanda, even though the technology has attracted significant global attention. Heavy usage of conventional power has led to the depletion of fossil fuels. At the same time, it has highlighted its unfriendly relationship with the environment because of carbon dioxide (CO2) emission, which is a major cause of global warming. Solar power is another source of electricity that has the potential to generate electricity in Rwanda. Firstly, this paper summarizes the present status of CSP and PV systems in Rwanda. Secondly, we conducted a technoeconomic analysis for CSP and PV systems by considering their strengths, weaknesses, opportunities, and threats (SWOT). The input data of the SWOT analysis were obtained from relevant shareholders from the government, power producers, minigrid, off-grid, and private companies in Rwanda. Lastly, the technical and economical feasibilities of CSP and PV microgrid systems in off-grid areas of Rwanda were conducted using the system advisor model (SAM). The simulation results indicate that the off-grid PV microgrid system for the rural community is the most cost-effective because of its low net present cost (NPC). According to the past literature, the outcomes of this paper through the SWOT analyses and the results obtained from the SAM model, both the CSP and PV systems could undoubtedly play a vital role in Rwanda’s rural electrification. In fact, PV systems are strongly recommended in Rwanda because they are rapid and cost-effective ways to provide utility-scale electricity for off-grid modern energy services to the millions of people who lack electricity access.

Access to energy is among the key pillars to socioeconomic and improved life style. The East African Community (EAC) countries, also members of sub-Saharan Africa, are among countries with enough energy resources but still struggling with low electricity access, and the lower proportion of citizens with electricity access challenges such as expensive tariff, frequent blackouts, and unreliable service still persists. Diesel technology is among the easy and fast installation technologies for a location with an urgent need of electricity while solar is a clean technology with free fuel. Considering the diversity of electricity tariffs, cost of diesel fuel, and suitability to solar energy exploitation in EAC, this paper intends to provide a technoeconomic analysis for reliable, affordable, and sustainable energy system in the region. A daily load of 94.44 kWh recorded from averaging electricity bills of a luxury house in Kigali, Rwanda, is used as research object, and HOMER simulations are carried on considering the level of such daily load being supplied by either (a) diesel generator, (b) solar+diesel technology, (c) PV+battery storage, or (d) PV+battery storage+grid system in each member country of the EAC. The results show that (a) solar energy is a feasible and applicable technology for energy generation for the whole six EAC countries; (b) for South Sudan, if it is a standalone system, the diesel technology is less costly than solar technology; however, solar energy can still be recommended to be adopted as it has no gas emissions; (c) except South Sudan, PV+battery storage technology is found to be more affordable and cleaner than any technology including diesel; and (d) the option of connecting PV+battery storage to the grid is found more economical for locations where grid interaction is possible because their levelized electricity costs (LCOE) are lower than the real electricity tariffs currently in use within each of the six EAC countries. The solar energy system with battery storage (both off-grid and grid connected) proposed in this research can lead to an efficient increase of national energy resource exploitation in the EAC countries, resulting in reliable, affordable, and sustainable energy access to all the citizenry of the EAC.

Rwanda is an East African Community (EAC) nation with rapid and remarkable past development in different sectors and still with the ambitious targets and plans to be achieved in the coming years ahead. The government plans universal electricity access by 2024 with 52% grid connection and 48% off-grid connections. In the transport sector, the concept of electric vehicles has been initiated and started in order to contribute to the UN Paris agreement and decrease the reliance of the transport sector on gaseous fuels which are one source of air pollutants leading to climate change, premature deaths, and morbidity associated with poor air quality. With higher electricity demand than the generation of the Rwandan power grid, different energy strategies are being developed with the overall objective to achieve the targeted universal energy access. In order to overcome the aforementioned issue, this paper proposes an integration of solar PV microgrids for the satisfaction of electric vehicle (EV) technology in Rwanda. Using HOMER Grid software, a managed EV charging station is simulated to a grid connected solar PV microgrid with storage in order to assess the economic impact. The results show that the proposed technology can lower the levelized cost (LCOE) of electricity by 139.7%. This study can contribute to further research developments in either different perspectives related to the integration of distributed energy resources (DERs) with electric vehicles or studies related to affordable and environment-energy systems.

A transition to solar energy systems is considered one of the most important alternatives to conventional fossil fuels. Until recently, solar air heaters (SAHs) were among the other solar energy systems that have been widely used in various households and industrial applications. However, the recent literature reveals that efficiencies of SAHs are still low. Some metaheuristic algorithms have been used to enhance the efficiencies of these SAH systems. In the paper, we do not only discuss the techniques used to enhance the performance of SAHs, but we also reviewed a majority of published papers on the applications of SAH optimization. The metaheuristic algorithms include simulated annealing (SA), particle swarm optimization (PSO), genetic algorithm (GA), artificial bee colony (ABC), teaching-learning-based optimization (TLBO), and elitist teaching-learning-based optimization (ETLBO). For this research, it should be noted that this study is mostly based on the literature published in the last ten years in good energy top journals. Therefore, this paper clearly shows that the use of all six proposed metaheuristic algorithms results in significant efficiency improvements through the selection of the optimal design set and operating parameters for SAHs. Based on the past literature and on the outcomes of this paper, ETLBO is unquestionably more competitive than ABC, GA, PSO, SA, and TLBO for the optimization of SAHs for the same considered problem. Finally, based on the covered six state-of-the-art metaheuristic techniques, some perspectives and recommendations for the future outlook of SAH optimization are proposed. This paper is the first-ever attempt to present the current developments to a large audience on the applications of metaheuristic methods in SAH optimization. Thus, researchers can use this paper for further research and for the advancement of the proposed and other recommended algorithms to generate the best performance for the various SAHs.