Hyaluronan (HA) is a naturally occurring polysaccharide widely used in medicine and cosmetics. To further broaden its potential, various HA derivatives have been developed with the aim of reducing solubility, slowing degradation, or providing other beneficial properties. However, for most medical applications, these derivatives must be processed into suitable forms. Here we present water-insoluble fibres prepared from lauroyl-modified HA using a wet spinning process. Important properties of the fibres, such as swelling or the degradation rate, can be fine-tuned by adjusting the degree of HA modification. Due to their mechanical properties, the lauroyl HA fibres can be easily processed into threads and subsequently into fabrics of various sizes, shapes, and degrees of porosity. In addition, in vitro cytotoxicity testing of the fibres showed that they were non-cytotoxic. Overall, our results suggest that lauroyl HA fibres are a promising material that could be used to develop a variety of medical devices.

Traditional filtration media composed of fibers with sizes on the micrometer scale have difficulty filtering particles a little smaller than 300 nm. Even though nanofibrous materials are able to capture these particles and can have excellent filtration efficiency, their widespread use continues to be inhibited by several obstacles, particularly an excessive pressure drop and the inability to form self-supporting filtration membranes. We have prepared two types of composite materials, namely an ultra-thin nanofibrous layer made of polyurethane or nylon with various fiber diameters and pore areas. Scanning electron microscopy was used for their characterization. The nanofibrous layer was deposited directly onto a traditional melt-blown polypropylene filtration fabric with a very low area weight of 30 g/m 2 , which facilitates handling and bypasses the need for the layer to be self-supporting. Moreover, a fine polyethylene mesh was added as a separate layer to prevent humidity from passing through the filtration material as well as to cover fabrics. The filtration efficiency and the pressure drop of the prepared materials were determined. The results showed that the incorporation of a nylon nanofibrous layer with smaller fiber diameters and pore areas leads to a significant increase in the filtration efficiency (92%) against the most penetrating particles, the critical size of which decreased to 50 nm, while the pressure drop was comparable to the pressure drop of a commercially available FFP2 respirator. The prepared filtration material could be used to manufacture respirators.

Nanofibrous materials are used in drug delivery as carriers of active ingredients. These can be incorporated into the materials with various electrospinning methods that differ mainly in the way spinning solutions are prepared. Each method affects primarily the encapsulation efficiency and distribution of active ingredients in the materials. This study focuses on the incorporation of octenidine dihydrochloride (OCT) and triclosan (TRI) into nanofibrous materials electrospun from native hyaluronic acid emulsions, dispersions, and blends. OCT had no substantial effect on fiber morphology, which is affected by the solvent system. All OCT encapsulation efficiencies were comparable (approximately 90%). TRI encapsulation efficiencies varied greatly depending on the method used. Merely 3% of TRI was encapsulated when it was spun from a dispersion. Encapsulation efficiency was higher, and TRI was incorporated in clusters when an emulsion was used. The best result was achieved with a blend, in which case 96% of TRI was encapsulated.

Nanofibrous materials produced from natural polymers have wide range of potential uses in regenerative medicine. This paper focuses on preparation of nanofibrous layers produced from intentionally hydrophobized derivatives of hyaluronan, which is known for its ability to promote wound healing. This structural modification of hyaluronan expands the range of potential uses of this promising material, which is otherwise limited due to the hydrophilic nature of hyaluronic acid. The aim of this research was preparation of nanofibrous material that would retain its fibrous structure and dimensional stability even after getting into contact with an aqueous medium, which is impossible to achieve with layers composed solely of native hyaluronan. As a result, such material would be able to retain its breathability and good mechanical properties when both dry and wet. Furthermore, all prepared materials were proved non-toxic for cells. This self-supporting nanofibrous matrix can be used as a scaffold, or porous wound dressing.

Due to their large active surface, high loading efficiency, and tunable dissolution profiles, nanofibrous mats are often cited as promising drug carriers or antimicrobial membranes. Hyaluronic acid has outstanding biocompatibility, but it is hydrophilic. Nanofibrous structures made from hyaluronan dissolve immediately, making them unsuitable for controlled drug release and longer applications. We aimed to prepare a hyaluronan-based antimicrobial nanofibrous material, which would retain its integrity in aqueous environments. Self-supporting nanofibrous mats containing octenidine dihydrochloride or triclosan were produced by electrospinning from hydrophobized hyaluronan modified with a symmetric lauric acid anhydride. The nanofibrous mats required no cross-linking to be stable in PBS for 7 days. The encapsulation efficiency of antiseptics was nearly 100%. Minimal release of octenidine was observed, while up to 30% of triclosan was gradually released in 72 h. The nanofibrous materials exhibited antimicrobial activity, the fibroblast viability was directly dependent on the antiseptic content and its release.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Wound dressings with silver have been shown to be cytotoxic in vitro. However, the extrapolation of this cytotoxicity to clinical settings is unclear. We applied dressings with various forms of silver on porcine skin ex vivo and investigated silver penetration and DNA damage. We assessed antimicrobial efficacy, cytotoxicity to skin cells, and immune response induced by the dressings. All dressings elevated the DNA damage marker γ-H2AX and the expression of stress-related genes in explanted skin relative to control. This corresponded with the amount of silver in the skin. The dressings reduced viability, induced oxidative stress and DNA damage in skin cells, and induced the production of pro-inflammatory IL-6 by monocytes. The oxidative burst and viability of activated neutrophils decreased. The amount of silver released into the culture medium varied among the dressings and correlated with in vitro toxicity. However, antimicrobial efficiencies did not correlate strongly with the amount of silver released from the dressings. Antimicrobial efficiency and toxicity are driven by the form of silver and the construction of dressings and not only by the silver concentration. The damaging effects of silver dressings in ex vivo skin highlight the importance of thorough in vivo investigation of silver dressing toxicity.

The aim of this study was to prepare self-supporting homogeneous nano/microfibrous layers with a content of the clay mineral kaolinite and kaolinite modified with the antibacterial agent chlorhexidine (CH). Fibers were made of hydrophobic polymers-polyurethane and polycaprolactone. Polymer suspensions for electrospinning contained 2, 5, and 8 wt % (relative to the total weight of the suspension) of kaolinite or CH/kaolinite and were electrospun using 4SPIN LAB. The morphology of prepared fibrous layers was characterized using scanning electron microscopy; energy-dispersive X-ray spectroscopy mapping and Raman spectroscopy were used to confirm the presence and distribution of kaolinite in the layers. Fiber diameters decreased after adding kaolinite or CH/kaolinite and ranged from 600 nm to 5 μm. Antibacterial CH was found in kaolinite itself as well as separately in the fibers (result of imperfect bonding of CH onto the surface of kaolinite). The encapsulation efficiency of all samples exceeded 64%, and the highest efficiency was observed in samples with 2 wt % CH/kaolinite. Samples containing CH exhibited good antibacterial activity against Staphylococcus aureus, and the effectiveness of which was affected by the concentration of the antibacterial agent. The release of CH was very slow, and there was no initial burst release. Overall, no more than 5% of the CH was released over a course of 168 h. The Korsmeyer-Peppas model revealed that CH is released by a diffusion mechanism.

This contribution focuses on the effects of electrospinning process on the homogeneity of nanofibrous tubular structures caused by different emitters. Six types of emitters were used for the production of nanofibrous tubes. For all, the electric potential and the electric field were simulated. The quality of the produced tubes was verified by scanning electron microscopy, contact measurement of thickness and by a new digital image processing method based on transillumination. The analysis of the spun samples proved that the quality and therefore the parameters of the prepared tubes are significantly influenced by the choice of an emitter and its configuration. The use of the five-needle and needleless emitters resulted in a tenfold increase in production, however, image analysis revealed major thickness inhomogeneities. The highest thickness homogeneity and a high repeatability of the spinning process were achieved by using a moving double-needle emitter. The results will find use especially in the research of small-diameter vascular replacements and other applications in the field of tissue engineering requiring highly uniform tubular grafts.

In this work, a new amphiphilic derivative made of 10-undecylenic acid grafted to hyaluronan was prepared by mixed anhydrides. The reaction conditions were optimized, and the effect of the molecular weight (Mw), reaction time, and the molar ratio of reagents was explored. Using this methodology, a degree of substitution up to 50% can be obtained. The viscosity of the conjugate can be controlled by varying the substitution degree. The physicochemical characterization of the modified hyaluronan was performed by infrared spectroscopy, Nuclear Magnetic Resonance, Size-Exclusion Chromatography combined with Multiangle Laser Light Scattering (SEC-MALLS), and rheology. The low proton motility and self-aggregation of the amphiphilic conjugate produced overestimation of the degree of substitution. Thus, a novel method using proton NMR was developed. Encapsulation of model hydrophobic guest molecules, coenzyme Q10, curcumin, and α-tocopherol into the micellar core was also investigated by solvent evaporation. HA-UDA amphiphiles were also shown to self-assemble into spherical nanostructures (about 300 nm) in water as established by dynamic light scattering. Furthermore, HA-UDA was crosslinked via radical polymerization mediated by ammonium persulphate (APS/TEMED). The cross-linking was also tested by photo-polymerization catalyzed by Irgacure 2959. The presence of the hydrophobic moiety decreases the swelling degree of the prepared hydrogels compared to methacrylated-HA. Here, we report a novel hybrid hyaluronan (HA) hydrogel system of physically encapsulated active compounds and chemical crosslinking for potential applications in drug delivery.

In this work, a hybrid copolymer consisting of poly(3-hydroxybutyrate) grafted to hyaluronic acid (HA) was synthesised and characterised. Once formed, the P(3HB)-g-HA copolymer was soluble in water allowing a green electrospinning process. The diameters of nanofibres can be tailored by simply varying the M-w of polymer. The optimization of the process allowed to produce fibres of average diameter in the range of 100-150 nm and low polydispersity. The hydrophobic modification has not only increased the fibre diameter, but also the obtained layers were homogenous. At the nanoscale, the hybrid copolymer exhibited an unusual hairy topography. Moreover, the hardness and tensile properties of the hybrid were found to be superior compared to fibres made of unmodified HA. Particularly, this reinforcement was achieved at the longitudinal direction. Additionally, this work reports the use in the composition of a water-soluble copolymer containing photo cross-linkable moieties to produce insoluble materials post-electrospinning. The derivatives as well as their nanofibrous mats retain the biocompatibility of the natural polymers used for the fabrication.

Metallic implants are widely used in orthopaedic and orthodontic applications. However, generally surface treatment of the metallic surfaces is necessary to render them more biologically active. Herein, we describe a direct write printing method to modify metallic implant surfaces with biocompatible polymers with microscale precision. Application of polymeric micropatterns on metallic implant surfaces can (i) improve their interaction with the host tissue, (ii) enable the delivery of growth factors, antibiotics, anti-inflammatory cytokines etc from the implant surface and (iii) can control the immune responses to the implant via controlling the attachment of immune cells, such as macrophages. Surface patterns with a resolution of less than 50 μm can be created using an electro hydrodynamic (EHD) printing, a template-free and single-step process. We present a revised EHD printing method for the deposition of parallel strips of photocrosslinkable, cell adhesive polymeric composites with spacing of around 20 μm onto medical grade titanium substrates. Optimization of voltage, feeding rate and collection speed resulted in regular structures via very rapid movement of the grounded rotating collector driven to equivalent of the linear surface speed of above 100 cm s−1. In the experimental part a mixture of chemically modified PEG /gelatin was deposited onto a conductive titanium substrate with different surface pretreatments with an area of 400 mm2. Acid etched or UV treated titanium surfaces improved the stability of the printed structures. Polymeric lines induced temporary orientation of human monocytes (THP-1) and induced a thicker cell multilayer formation by 3T3 fibroblasts (p < 0.05). Staining of the monocytes for M1(CD80) and M2 (CD206) macrophage markers on the patterned surface showed mixed populations with higher anti-inflammatory cytokine secretion compared to tissue culture plastic control. The results demonstrate the suitability of this method for the preparation of biomaterials with structured surfaces on large areas and with desired chemical composition.

We report on the 59Fe radiolabelling of iron oxide nanoparticle cores through post-synthetic isotope exchange (59Fe-IONPex) and precursor labelling (59Fe-IONPpre). Scanning electron microscopy and dynamic light scattering measurements showed no impact of radiolabelling on nanoparticle size or morphology. While incorporation efficiencies of these methods are comparable—83 and 90% for precursor labelling and post-synthetic isotope exchange, respectively—59Fe-IONPpre exhibited much higher radiochemical stability in citrated human plasma. Quantitative ex vivo biodistribution study of 59Fe-IONPpre coated with triethylene glycol was performed in Wistar rats. Following the intravenous administration, high 59Fe concentration was observed in the lung and the organs of the reticuloendothelial system such as the liver, the spleen and the femur.

A new photopolymerizable derivative of hyaluronan (methacrylhydrazide-HA, MAHA) was prepared by carbodiimide chemistry. The reaction conditions were optimized for molecular weight (Mw), reaction time and amount of reagents with a degree of methacrylation (DM) ranging from 2% to 58%. Methacrylhydrazide-HA was hydrolytically stable (PBS, 7days, 37°C) in contrast to commonly used methacrylester analoque (23% hydrolyzed). MAHA readily photopolymerized into densely crosslinked hydrogels under physiological conditions. The varied DM, Mw, irradiation time (texp) and macromer concentration in photocrosslinking afforded hydrogels with different physical (swelling ratio, degradation rate) and mechanical properties (stiffness, toughness). Three-dimensional fabrication and surface patterning of MAHA hydrogels were demonstrated by photolithography and light mediated micromolding. A live-dead assay with skin fibroblasts showed convenient biocompatibility of MAHA (16%, 116kDa) for potential scaffolding applications in tissue engineering and regenerative medicine.

Chondroitin sulfate (CS) was chemoselectively oxidized by Tempo/NaClO to C-6 aldehyde of a d-galactosamine subunit (GalNAc). The subsequent, spontaneous desulfatation of oxidized CS gave rise to α,β-unsaturated aldehyde. A new derivative of CS was fully characterized and a degree of oxidation was determined by spectroscopic analysis. The optimization of reaction conditions showed a proportional degree of oxidation to an amount of sodium hypochlorite. The utility of α,β-unsaturated aldehyde for crosslinking and conjugation was demonstrated by a seamless condensation with various N-nucleophiles. We also demonstrated pH-dependent release of biologically active agents from oxidized CS. A live-dead assay in the presence of α,β-unsaturated aldehyde revealed unaffected viability of NIH 3T3 fibroblasts, which made this precursor promising for several biomedical applications including drug delivery and tissue engineering.

Hyaluronan (HA) was chemically modified to a photocurable derivative by the acylation with a mixed anhydride of trans-cinnamic acid and characterized by UV, IR and 2D NMR spectroscopy. Photocurable HA was processed to a microfibrous structure by wet-spinning technology. Water solubility of otherwise water-soluble HA microfibres was reduced significantly by the solid-state photocrosslinking. We also investigated that the nature of polymer structure had a great impact to a final crosslink ratio. The analysis of the mechanical properties showed higher ultimate tensile strength and increased rigidity of the photocrosslinked fibres in comparison to the untreated ones. Moreover all tested materials are regarded as biocompatible according to the tests of cell viability, phototoxicity and enzymatic degradability, which make them suitable candidates for numerous biomedical applications.

Analysis of the nanofibers based on Raman spectroscopy and singular value decomposition is presented. The calibration of results is included and local homogeneity of samples is shown through Raman maps. SVD results after and before calibration curve application and recalculation to percents.