Natural polymers are promising candidates to create biomedical hydrogel scaffolds that are commonly used in various healthcare applications due to their ability to replicate the natural environment of tissues. However, natural polymers lack the mechanical and physicochemical properties required to create these biomimetic scaffolds. To address these shortcomings, natural polymers are first methacrylated and then photocrosslinked to create hydrogels with strong covalent bonds. These types of hydrogels have been extensively used over the years to fabricate custom-designed hydrogels tailored to individual patient’s needs using three-dimensional (3D) bioprinting technology. Herein, we review the mechanisms, advantages, and limitations of using methacrylation and photopolymerization-based processes to synthesize biomedical hydrogels. Finally, we explore the progress and future perspectives of using these types of polymeric hydrogels as suitable bioinks for 3D bioprinting, tissue engineering, and other applications.

Ionizing radiation exposure, whether from accidental incidents, radiation therapy, or radiological weapons, poses a significant risk to public health and military personnel. Survivors experience both acute and chronic physiological effects, including tissue dysfunction, fibrosis, and impaired organ function. Among affected tissues, skeletal muscle is particularly vulnerable, as radiation damages muscle precursor cells (MPCs), impairing their ability to regenerate and maintain muscle homeostasis. Extracellular vesicles (EVs), nano-sized lipid-bound vesicles released by cells, mediate intercellular communication by transferring bioactive molecules such as proteins, lipids, and microRNAs. EVs derived from MPCs have shown promise in promoting muscle regeneration, yet their role in radiation injury remains unclear. This study investigated whether EVs from healthy MPCs (NoRad-EVs) could improve cell function in irradiated cells compared to EVs from irradiated MPCs (Rad-EVs). Our findings demonstrated that viability and proliferation are improved in irradiated MPCs receiving NoRad-EVs whereas Rad-EVs fail to mitigate radiation-induced damage. Specifically, NoRad-EVs increased MPC viability from 52 ± 5.7% to 71 ± 4.9% and improved BrdU-measured proliferation by ~ 16% compared to untreated irradiated controls. NoRad-EVs also enhanced angiogenesis in human umbilical vein endothelial cells (HUVECs) and microvascular fragments (MVFs). HUVECs treated with NoRad-EVs showed significantly greater tube branching length (~ 1.5-fold increase) compared to cells exposed to Rad-EVs. Similarly, MVFs receiving NoRad-EVs treatment exhibited a ~ 3-fold increase in vessel density after 7 days as opposed to the group cultured with Rad-EVs. Differential miRNA expression analysis revealed significant alterations in Rad-EVs compared to NoRad-EVs, affecting key pathways related to muscle repair, angiogenesis, and oxidative stress response. Thirteen miRNAs were downregulated and seven were upregulated in Rad-EVs compared to NoRad-EVs (fold change ≥ 1.3, p < 0.05), including targets involved in VEGF, PI3K-Akt, and FoxO signaling. This research underscores the need for effective countermeasures against radiation-induced injuries, which have detrimental effects on the pro-angiogenic and proliferative functions of MPCs and their secreted EVs. Overall, these promising in vitro findings support the restorative impacts of NoRad-EVs as a potential therapeutic, including miRNA-enriched vesicles, in mitigating radiation-induced muscle injury, particularly in the context of military medicine and radiological emergencies.

Human adipose-derived stem cells (hASCs) are cryopreserved traditionally using dimethyl sulfoxide (DMSO) as the cryoprotectant agent. DMSO penetrates cell membranes and prevents cellular damage during cryopreservation. However, DMSO is not inert to cells, inducing cytotoxic effects by causing mitochondrial dysfunction, reduced cell proliferation, and impaired hASCs transplantation. Additionally, large-scale production of DMSO and contamination can adversely impact the environment. A sustainable, green alternative to DMSO is trehalose, a natural disaccharide cryoprotectant agent that does not pose any risk of cytotoxicity. However, the cellular permeability of trehalose is less compared to DMSO. Here, a microfluidic chip is developed for the intracellular delivery of trehalose in hASCs. The chip is designed for mechanoporation, which creates transient pores in cell membranes by mechanical deformation. Mechanoporation allows the sparingly permeable trehalose to be internalized within the cell cytosol. The amount of trehalose delivered intracellularly is quantified and optimized based on cellular compatibility and functionality. Furthermore, whole-transcriptome sequencing confirms that less than 1% of all target genes display at least a twofold change in expression when cells are passed through the chip compared to untreated cells. Overall, the results confirm the feasibility and effectiveness of using this microfluidic chip for DMSO-free cryopreservation of hASCs.

Engineering thermogenic adipose tissue (e.g., beige or brown adipose tissues) has been investigated as a potential therapy for metabolic diseases or for the design of personalized microtissues for health screening and drug testing. Current strategies are often quite complex and fail to accurately fully depict the multicellular and functional properties of thermogenic adipose tissue. Microvascular fragments, small intact microvessels comprised of arteriole, venules, and capillaries isolated from adipose tissue, serve as a single autologous source of cells that enable vascularization and adipose tissue formation. This article describes methods for optimizing culture conditions to enable the generation of three-dimensional, vascularized, and functional thermogenic adipose tissues from microvascular fragments, including protocols for isolating microvascular fragments from adipose tissue and culture conditions. Additionally, best practices are discussed, as are techniques for characterizing the engineered tissues, and sample results from both rodent and human microvascular fragments are provided. This approach has the potential to be utilized for the understanding and development of treatments for obesity and metabolic disease.

Engineering thermogenic adipose tissue (e.g., beige or brown adipose tissues) has been investigated as a potential therapy for metabolic diseases or for the design of personalized microtissues for health screening and drug testing. Current strategies are often quite complex and fail to accurately fully depict the multicellular and functional properties of thermogenic adipose tissue. Microvascular fragments, small intact microvessels comprised of arteriole, venules, and capillaries isolated from adipose tissue, serve as a single autologous source of cells that enable vascularization and adipose tissue formation. This article describes methods for optimizing culture conditions to enable the generation of three-dimensional, vascularized, and functional thermogenic adipose tissues from microvascular fragments, including protocols for isolating microvascular fragments from adipose tissue and culture conditions. Additionally, best practices are discussed, as are techniques for characterizing the engineered tissues, and sample results from both rodent and human microvascular fragments are provided. This approach has the potential to be utilized for the understanding and development of treatments for obesity and metabolic disease.

The skeletal muscles of Type II diabetic (T2D) patients can be characterized by a reduced vessel density, corresponding to deficiencies in microvascular angiogenesis. Interestingly, T2D also inhibits the function of many myogenic cells resident within skeletal muscle, including satellite cells, which are well-known for the role they play in maintaining homeostasis. The current study was undertaken to gain a better understanding of the mechanisms whereby satellite cell progeny, muscle precursor cells (MPCs), influence microvascular angiogenesis. Network growth and the expression of genes associated with angiogenesis were reduced when microvessels were treated with conditioned media generated by proliferating MPCs isolated from diabetic, as compared to control rat skeletal muscle, a phenomenon that was also observed when myoblasts from control or diabetic human skeletal muscle were used. When only exosomes derived from diabetic or control MPCs were used to treat microvessels, no differences in microvascular growth were observed. An evaluation of the angiogenesis factors in control and diabetic MPCs revealed differences in Leptin, vascular endothelial growth factor (VEGF), IL1-β, interleukin 10, and IP-10, and an evaluation of the MPC secretome revealed differences in interleukin 6, MCP-1, VEGF, and interleukin 4 exist. Angiogenesis was also reduced in tissue-engineered skeletal muscles (TE-SkM) containing microvessels when they were generated from MPCs isolated from diabetic as compared to control skeletal muscle. Lastly, the secretome of injured control, but not diabetic, TE-SkM was able to increase VEGF and increase microvascular angiogenesis. This comprehensive analysis of the interaction between MPCs and microvessels in the context of diabetes points to an area for alleviating the deleterious effects of diabetes on skeletal muscle.

Natural polymer-based hydrogels are excellent for encapsulating hydrophilic drugs, but they are mechanically weak and degrade easily. In this communication, we exploit the electrostatic interaction between nanosilicates (nSi) and gelatin methacrylate (GelMA) to form a mechanically tough nanocomposite hydrogel for pharmaceutical drug delivery. These hydrogels, prepared at subzero temperatures to form cryogels, displayed macroporous structures, which favors cell infiltration. The designed tough cryogel also showed a slower rate of degradation. Furthermore, we encapsulated the small molecule metformin and sustained the drug release under physiological conditions. Cryogel-loaded metformin reduced the effect of endothelial cell injury caused by nutrient deprivation in vitro. Finally, we hypothesize that this versatile nanocomposite material will find use in diverse biomedical applications.

Skeletal muscle is a tissue that is directly involved in the progression and persistence of type 2 diabetes (T2D), a disease that is becoming increasingly common. Gaining better insight into the mechanisms that are affecting skeletal muscle dysfunction in the context of T2D has the potential to lead to novel treatments for a large number of patients. Through its ability to emulate skeletal muscle architecture while also incorporating aspects of disease, tissue-engineered skeletal muscle (TE-SkM) has the potential to provide a means for rapid high-throughput discovery of therapies to treat skeletal muscle dysfunction, to include that which occurs with T2D. Muscle precursor cells isolated from lean or obese male Zucker diabetic fatty rats were used to generate TE-SkM constructs. Some constructs were treated with adipogenic induction media to accentuate the presence of adipocytes that is a characteristic feature of T2D skeletal muscle. The maturity (compaction and creatine kinase activity), mechanical integrity (Young's modulus), organization (myotube orientation), and metabolic capacity (insulin-stimulated glucose uptake) were all reduced by diabetes. Treating constructs with adipogenic induction media increased the quantity of lipid within the diabetic TE-SkM constructs, and caused changes in construct compaction, cell orientation, and insulin-stimulated glucose uptake in both lean and diabetic samples. Collectively, the findings herein suggest that the recapitulation of structural and metabolic aspects of T2D can be accomplished by engineering skeletal musclein vitro. Impact Statement The tissue engineering of skeletal muscle to model disease and injury has great promise to provide a tool to develop and/or improve therapeutic approaches for improved health care. A tissue-engineered skeletal muscle model of one of the most common and debilitating diseases, type 2 diabetes, has been developedin vitroas evidenced by the structural and metabolic alterations that are consistent with the disease phenotypein vivo.

Hydrogels can be fabricated and designed to exert direct control over stem cells' adhesion and differentiation. In this study, we have investigated the use of polydopamine (pDA)-treatment as a binding platform for bioactive compounds to create a versatile gelatin-alginate (Gel-Alg) hydrogel for tissue engineering applications. Precisely, pDA was used to modify the surface properties of the hydrogel and better control the adhesion and osteogenic differentiation of human adipose-derived stem cells (hASCs). pDA enabled the adsorption of different types of bioactive molecules, including a model osteoinductive drug (dexamethasone) as well as a model pro-angiogenic peptide (QK). The pDA treatment efficiently retained the drug and the peptide compared to the untreated hydrogel and proved to be effective in controlling the morphology, cell area, and osteogenic differentiation of hASCs. Overall, the findings of this study confirm the efficacy of pDA treatment as a valuable strategy to modulate the biological properties of biocompatible Gel-Alg hydrogels and further extend their value in regenerative medicine.

This work investigates a sequential strategy to develop DNA-based hydrogel scaffolds with interpenetrating polymeric network. The scaffolds were formed via a two-step procedure. First, a covalently cross-linked DNA-based cryogel was formed by the chemical reaction between DNA strands and a bifunctional cross-linker, polyethylene glycol diepoxide at subzero temperatures. In the second step, alginate chains were absorbed into the preformed macroporous DNA cryogel network, followed by ionic cross-linking with divalent calcium ions. The individual and synergistic effects of covalent and ionic cross-linkings on mechanical and physical properties of the IPN cryogel were tested. The IPN cryogels were able to sustain large deformations higher than 95% of strain under compressive forces without exhibiting any failure. Addition of a physically cross-linked alginate network to the covalently linked DNA cryogel significantly enhanced its toughness and energy dissipation compared to the covalent network alone. The formulated hydrogels also exhibited excellent biocompatibility with human stem cells. Overall, this DNA-based IPN cryogel has the potential to be used as a biomaterial scaffold for a diverse range of tissue engineering applications.

Prevailing drug delivery strategies rely on the use of synthetic nanocarriers like metal nanoparticles and polymeric liposomes to control the release of therapeutics in a safe and efficacious manner. Despite their high efficiency in encapsulating drugs, these systems exhibit low to moderate biocompatibility, low cellular uptake, and sub-optimal targeting capabilities. Conversely, cell-derived nanoparticles (CDNs) have emerged as a promising alternative to these artificial drug delivery carriers for achieving safer clinical outcomes. In this study, we have generated CDNs from human adipose-derived stem cells (hASCs) using a high-yield fabrication strategy. Briefly, hASCs were subjected to a cell-shearing approach that entails passing the cells through an array of filters, along with serial centrifugations to eliminate intracellular contents. Ultimately, the fragmented parent cell membrane self-assembles to form the CDNs. This strategy successfully converted 80% of the plasma membrane into the novel nanocarriers with an average hydrodynamic diameter of 100 nm. Stability analysis confirmed that the formulated nanocarriers are stable for over 3 weeks, making them a potent candidate for long-term therapies. To demonstrate their potential in drug delivery, we encapsulated trehalose, a cell-impermeable sugar molecule, into the CDNs via an extrusion loading technique. Drug-loaded CDNs were effectively internalized into human umbilical vein endothelial cells (HUVECs) and hASCs, without inducing any significant cytotoxicity. Overall, the findings of this study establish the potential of hASC-derived CDNs as customizable biomimetic nanocarriers for drug delivery and other translational medicine applications.

Cryogels are a particular type of hydrogels that possess great potential in both fields of drug delivery and tissue engineering. Based on these premises, the goal of this work was to develop a cytocompatible polymeric cryogel, which could be used as a spongy scaffold to promote the delivery of biomolecules. Precisely, the novel formulation was fabricated by combining dextran methacrylate (DEX-MA) and polyethylene glycol dimethacrylate (PEG-DMA) through radical polymerization at a temperature of -15 degrees C.The swelling, porosity, mechanical properties, and the drug release profile of vitamin B12 from the optimized cryogel were evaluated and compared to hydrogels fabricated at room temperature. The use of the cryo-gelation technique enabled the formation of scaffolds with improved swelling, increased interconnected porosity, and higher mechanical resistance than conventional hydrogels. The cryogels proved to be non-toxic and suitable carriers for the delivery of water-soluble biomolecules. Overall, the novel cytocompatible cryogel formulation could be used for biomedical applications that require the need of a macroporous scaffold for localized delivery of bioactive molecules. (C) 2020 Elsevier B.V. All rights reserved.

Physical techniques for intracellular delivery of exogeneous materials offer an attractive strategy to enhance the therapeutic efficiency of stem cells. However, these methods are currently limited by poor delivery efficiency as well as cytotoxic effects. Here, a high throughput microfluidic device is designed for efficient (≈85%) cytosolic delivery of exogenous macromolecules with minimal cell death (less than 10%). The designed microfluidic device enables the generation of transient pores as the cells pass through the micron‐sized constrictions (6–10 µm) leading to the passive diffusion of extracellular cargos into the cell cytosol. Specifically, the microfluidic system is designed to induce a double deformation on the cell membrane at the squeezing zones to maximize intracellular delivery. Additionally, the flow rate, ionic concentration, and the molecular weight of the cargo are optimized for maximum efficiency. The optimized device enables cytosolic diffusion of small (3 kDa) and large molecules (70 kDa) without inducing any apoptotic effect. Overall, this double cell deformation platform offers new opportunities to rapidly and efficiently deliver extracellular cargo into stem cells without affecting their viability and functionality.

The development of ectopic adipose tissue in skeletal muscle is associated with several skeletal muscle and metabolic pathologies, including Type II Diabetes Mellitus. The adipogenic differentiation of muscle precursor cells (MPCs) has been postulated to occur in skeletal muscle in vivo in a three-dimensional (3-D) configuration; therefore, it is appropriate to investigate this phenomenon using 3-D matrices in vitro. The capacity for MPC adipogenic differentiation in a 3-D environment was investigated in fibrin hydrogels by treating MPCs derived from healthy or diabetic animals with adipogenic induction medias that differed in their ability to increase lipid accumulation and activate the expression of genes associated with adipogenic differentiation (peroxisome proliferator-activated receptor gamma (PPARG), adiponectin (ADIPOQ), and fatty acid synthase (FAS)). The capacity for adipogenic differentiation was diminished, but not prevented, if myogenic differentiation preceded MPC exposure to adipogenic induction conditions. Conversely, adipogenic differentiation was greater in hydrogels containing MPCs from diabetic rats as compared to those derived from lean rats, as evidenced by an increase in lipid accumulation and adipogenic gene expression. Collectively, the data herein support a role for the MPCs in adipogenesis in a 3-D environment and that they may contribute to the ectopic accumulation of adipose tissue. The observation that the potential for adipogenic differentiation is maintained even after a period of myogenic differentiation alludes to the possibility that adipogenesis may occur during different phases of muscle development. Finally, the increase in adipogenic differentiation in hydrogels containing MPCs derived from diabetic animals provides strong evidence that a pathological environment in vivo increases their capacity for adipogenesis.

Baculoviruses offer a multitude of advantages over other gene carriers due to their non-pathogenicity and inability to replicate in mammalian cells, ease of production, and high transduction efficiencies. To expand their functionality in vivo, baculoviruses containing mammalian transcription promoters (BacMam) can be physically entrapped within biocompatible hydrogels to modulate their release and transduction efficiency. The present work demonstrates several techniques in which BacMam viruses can be encapsulated and delivered in fibrin gel, an FDA-approved sealant and adhesive with numerous clinical applications, to provide spatiotemporal control over the delivery of BacMam viruses to mammalian cells. Fibrin is shown to be an effective biomaterial carrier for the delivery of BacMam viruses to mammalian cells growing in 2D culture, 3D culture, and in the co-delivery of stem cells and baculoviruses in the aerosolized delivery of fibrin films. Overall, the results of this work provide a valuable insight on the therapeutic potential of fibrin gels for in vivo BacMam-mediated gene delivery in regenerative medicine.

A novel injectable hydrogel based on DNA and silicate nanodisks was fabricated and optimized to obtain a suitable drug delivery platform for biomedical applications. Precisely, the hydrogel was des...

Gellan gum-based hydrogels display limited cell adhesion ability due to the absence of cell-anchorage points usually present in proteins found in the extracellular matrix (ECM). This issue limits their use in the biomedical field as scaffolds to promote tissue repair. Our work addresses this challenge by investigating the use of polydopamine (pDA) as a bioactive layer to improve the surface and biological properties of gellan gum-based hydrogels cross-linked using carbodiimide chemistry. Upon treatment with a pDA layer, the hydrogel displayed an increase in wettability and swelling properties. This change in physical properties had a direct impact on the biological properties of the scaffolds. Precisely, human adipose-derived stem cells (hASCs) seeded on the pDA coated gellan gum hydrogels displayed larger cell area, increased proliferation rate, and enhanced gene expression of focal adhesion and cytoskeletal proteins. Overall, the findings of this research support the use of pDA coating as a possible approach to improve the biological features of gellan gum-based scaffolds and modulate stem cell morphology and proliferation.

Injectable hydrogels represent a valuable tool for the delivery of therapeutic molecules aimed to restore the functionality of damaged tissues. In this study, we report the design of a nanocomposite DNA-based hydrogel crosslinked with oxidized alginate (OA) via the formation of reversible imine linkages. The formulated hydrogel functioned as an injectable carrier for the sustained delivery of a small molecule drug, simvastatin. The degree of oxidation of alginate and the concentration of silicate-based nanoparticles (nSi) were varied to modulate the rheological properties of the hydrogels. Specifically, the formulations consisting of OA with higher degree of oxidation displayed the highest value of storage moduli, yield stress, yield strain, and rapid recovery after removal of cyclic stress. The hydrogel formulations exhibited self-healing and shear-thinning properties due to the reversible nature of the covalent imine bonds formed between the aldehyde groups of OA and the amine groups present in the DNA nucleotides. Moreover, the incorporation of charged nSi further enhanced the shear strength of the formulated hydrogels by establishing electrostatic interactions with the phosphate groups of the DNA network. The optimized hydrogel was able to promote the sustained release of simvastatin for more than a week. The bioactivity of the released drug was confirmed by testing its ability to induce osteogenic differentiation and migration of human adipose-derived stem cells in vitro. Overall, the results obtained from this study demonstrate that DNA could be used as a natural biopolymer to fabricate self-healing injectable hydrogels with sustained release properties for minimally invasive therapeutic approaches. STATEMENT OF SIGNIFICANCE: Dynamic covalent chemistry, especially Schiff base reactions have emerged as a promising route for the formation of injectable hydrogels. Our study demonstrated the development of a DNA-based self-healing hydrogel formed via Schiff base reaction occurring at physiological conditions. The hydrogels functioned as sustained delivery vehicles for the hydrophobic drug simvastatin, which requires a polymeric carrier for controlled delivery of therapeutic concentrations of the drug without exhibiting cytotoxic effects. Presently available hydrogel-based drug delivery systems encounter major challenges for the delivery of hydrophobic drugs due to the hydrophilic nature of the base matrix. Our strategy presents a platform technology for the design of minimally invasive approaches for the sustained delivery of hydrophobic drugs similar to simvastatin.

In situ tissue repair holds great potential as a cell-free regenerative strategy. A critical aspect of this approach is the selection of cell instructive materials that can efficiently regulate the defect microenvironment via the release of chemoattractant factors to mobilize and recruit endogenous stem cells toward the site of implantation. Here we report the design of a DNA-based hydrogel as a drug delivery platform for the sustained release of a promising chemoattractant, SDF-1α. The hydrogel is composed of chemically cross-linked DNA strands, which are bridged via silicate nanodisks (nSi). Silicate nanodisks electrostatically interact with the negatively charged DNA backbone resulting in the formation of a dual cross-linked nanocomposite hydrogel with a combination of chemical and physical cross-link points. The formulated nanocomposites display enhanced elasticity and mechanical toughness as compared to their nonsilicate containing counterparts. Moreover, the electrostatic interaction between nSi and SDF-1α leads to sustained release of the chemokine from the hydrogels. The in vitro bioactivity assays confirm the retention of chemotactic properties of the protein after its release. Overall, the dual cross-linked DNA-based hydrogel platform could be potentially used as a cell-instructive material for the recruitment of host stem cells to guide the process of in situ tissue repair.