The reality of the autonomous vehicle in a near future is growing and is expected to induce significant change inthe occupant posture with respect to a standard driving posture. The delegated driving would allow sleeping and/or resting in a seatwith a reclined posture. However, the data in the literature are rare on the body kinematics, human tolerance, and injury types insuch reclined postures. The current study aims at increasing the knowledge in the domain and providing useful data to assess therelevance of the standard injury assessment tools such as anthropomorphic test devices or finite element human body models. For that purpose, a test series of three male Post-Mortem Human Subjects (PMHS) were performed in frontal impact at a 13.4 m/sdelta V. The backseat inclination was 58 degrees with respect to the vertical axis. The semi-rigid seat developed by Uriot et al.(2015) was used with a stiffer seat ramp. The restraint was composed of a lap belt equipped with two 3.5 kN load limiters, and ofa shoulder belt equipped of a 4 kN load limiter on the upper anchorage placed in the vicinity of the shoulder. The belts, the semi-rigid seat, and the footrest were equipped with force sensors. The rotations of the seat pan and of the seat ramp were also measured. The PMHS were instrumented with multi-axis accelerometers and Y angular velocity sensors attached to the head, thorax (T1 andT12 vertebrae), and sacrum. Strain gauges were glued onto the anterior face of the L1 to L5 lumbar vertebrae and onto the anteriorface of the iliac wings. To estimate the pelvis kinematics, a rigid support equipped with targets was fixed onto the femur shaft. Prior to test, X-ray imagery was performed to exhibit the initial curvature of the lumbar spine. After the tests, an in-depth necropsywas done, with a specific attention to the lumbar spine. In the chosen test conditions, no lap-belt submarining was observed for the three PMHS. One PMHS sustained an AIS2 pelvic ringfracture and another one sustained an AIS4 injury with complete separation of the left and right sacroiliac joints. Lumbar discruptures and vertebral fractures were observed for the three PMHS (AIS 2 and AIS3 coding). The number of separated rib fractureswere very different from one PMHS to another (0, 6 and 33). Response corridors for the external forces and kinematics were builtand are presented in the paper. The results are discussed by comparing with existing data for which the backseat was in standardposture.

Improve dummy response, submarining and abdominal injury prediction for the small occupant (future 5th percentile female THOR) and current THOR 50th percentile male.

Far side has been identified in the literature as a potential cause of numerous injuries and fatalities. Euro NCAP developed a far side test protocol to be performed to assess adult protection. A monitoring phase was undertaken between January 2018 and December 2019, and the far side assessment will become part of the rating for all vehicles launched in 2020 onward. A test buck was developed and 6 paired WorldSID / Post Mortem Human Subjects (PMHS) were subjected to the test protocol proposed by Euro NCAP to contribute to the development of limits. The buck consisted of a rigid seat and a rigid central console covered with 50 mm of Ethafoam TM 180 with a density of 16 kg/m3. The buck was mounted on the sled with an angle of 75° between the X axis of the vehicle and the X axis of the sled. The peak head excursion was compared between PMHS and the WorldSID dummy. It was found reasonably similar. However, the dummy repeatability was found to be poor. Out of 6 tests conducted on 6 PMHS, 2 specimens sustained AIS3 and, 3 specimens AIS2 cervical spine injuries, 3 specimens sustained AIS3, 1 AIS2 and 1 AIS1 thoracic injuries, and 2 specimens sustained AIS2 abdominal injuries. The peak values recorded on the dummy according to the Euro NCAP protocol were compared with the injury assessments of the PMHS tests. In the configuration used, which includes a central console, the hard thorax injury prediction was found to be excellent. For the neck injury prediction, the data were merged with similar results available in the literature and an Injury Risk Curve was proposed as a derivative from the curve published by Mertz et al. (2003) for neck extension.

Several studies, available in the literature, were conducted to establish the most relevant criterion for predicting the thoracic injury risk on the THOR dummy. The criteria, such as the maximum deflection or a combination of parameters including the difference between the chest right and left deflections, were all developed based on given samples of Post Mortem Human Subject (PMHS). However, they were not validated against independent data and they are not always consistent with the observations from field data analysis. For this reason, 8 additional PMHS and matching THOR tests were carried out to assess the ability of the criteria to predict risks. Accident investigations showed that a reduction of the belt loads reduces the risk of rib fractures. Two configurations with different levels of force limitation were therefore chosen. A configuration representing an average European vehicle was chosen as a reference. It consists of a 3-point belt with a 3.5 kN and then 2 kN digressive limiter, combined with a 54-liter airbag. For better reproducibility and durability, the tests were performed with a pre-inflated bag and a semi-rigid seat. In this first configuration, the THOR dummy had a maximum resulting deflection of 43 mm. To differentiate the criteria, the second configuration was chosen such that it resulted in about the same deflection on the THOR dummy, but with a 5 kN belt force limitation combined with a lower pressure airbag. To reach this target of 43 mm, the pulse severity was lowered. Some criteria were higher in this second configuration, which allows them to be distinguished from the maximum deflection criterion. Four tests on four PMHS were performed in each configuration. The injury assessments showed that the total number of fractures was almost the same in both configurations, but that the number of separated fractures was greater in the 5 kN configuration. 25% of the subjects sustained AIS >3 injuries related to the number of displaced fractures in the 3.5/2 kN load limitation configuration. The result increased to 75% in the 5kN configuration. In total, 8 PMHS and the matching THOR tests were performed and used to assess the ability of the thoracic criteria to predict rib fractures in 2 types of chest loading configurations. The test results did not allow to conclude on the relevance of the criteria measured on the THOR dummy for the total number of rib fractures identified at autopsy (NFR). However, clearly different assessments for separated rib fractures (NSFR), make it possible to differentiate the criteria. The maximum resultant deflection failed to properly predict separated rib fractures while other criteria that include the left-to-right rib deflection difference did.

The EuroSID-2re (ES-2re) is an Anthropometric Test Device (ATD) from the automotive domain designed for lateral impact. Since the 2000's, it has also been used by NATO armies to assess the risk of injury to armored vehicles occupants submitted to an Improvised Explosive Device (IED) attack. The resulting loading conditions from an explosion can vary a lot in term of impact velocity and duration. They range from high velocity impacts (~28 m/s), characterized by a short duration (~10 ms) corresponding to cases where the panel deforms under an explosion, to low velocity impacts (~4 m/s), ch aracterized by a long duration (~50 ms) similar to the automotive domain. The goal of the study is to develop a shoulder injury criterion for the EuroSID- 2re that is relevant over the whole loading conditions spectrum of the military domain. For that purpose, thirty-three laboratory ES-2re tests are conducted to replicate four PMHS shoulder impactor test series from the literature. Each test series corresponds to a different loading condition in term of impact velocity and duration: [28 m/s, 3 ms], [14 m/s, 9 ms], [7 m/s, 30 ms], [4 m/s, 50 ms]. The injury result (AIS 2015 scale) of each PMHS test is paired with the shoulder sensor force response signal of the corresponding ES-2re test, resulting in a sample of 75 paired-data. The proposed injury criterion resulting from the sample analysis is the straightened peak force Fs, which is an estimate of the peak of the external force applied to the shoulder. This criterion combines two metrics from the response signal of the shoulder force sensor Y-axis of the ES-2re ATD: the initial slope (S) and the peak (Fmax). The threshold value for a given injury risk depends on the duration of the impact: it is higher for the shorter duration. Thus, a third metric should be extracted from the ES-2re shoulder load cell: the duration of the force T. The present study proposes three force-duration threshold curves Fs=f(T) for low, medium, and high risks of shoulder AI2+ injury.

The EuroSID-2re (ES-2re) Anthropomorphic Test Device (ATD) commonly known as the crash test dummy is also used in the military domain to assess the risk of injury of armored vehicles occupants from lateral impact. The loading conditions range from low velocity - long duration impacts (4 m/s - 50 ms) similar to the automotive domain, to high velocity - short duration impacts (28 m/s - 3 ms) corresponding to cases where the panel deforms under an explosion. The human shoulder response to lateral impact was investigated at bounds of the loading condition spectrum previously mentioned, and also at intermediate conditions (14 m/s - 9 ms) in previous studies. The aim of the current study is to provide additional insight at the intermediate loading conditions which are not found in the literature. Eight pure lateral shoulder impact tests were performed on Post Mortem Human Subjects (PMHS) using an 8.1 kg rigid impactor at velocities ranging from 3.3 m/s to 8.8 m/s with the duration ranging from 25 ms to 35 ms. The PMHS were instrumented with accelerometers attached to the sternum, and the upper thoracic spine (T1 vertebra). Strain gages were glued onto the right and left clavicles and ribs 2 to 6. The shoulder force was measured at the interface with the impactor and the impact was filmed by high speed cameras (5000 fps) to track the YZ displacements of the impactor, T1 vertebra, and sternum in the laboratory frame. Three shoulders out of the eight sustained AIS 2 injuries which included a clavicle fracture. The impactor forces ranged from 1200 to 4600 N. The PMHS accelerations ranged from 44 to 163 g at the sternum, and from 17 to 60 g at the T1 vertebra. The analysis of the strain gage signals revealed that the clavicle fractures occurred at the beginning of the impact and coincided with a peak force. An estimate of the acromion-to-shoulder compression (Cmax) was computed. It ranged from 0% to 15% for the non-injured shoulders, and from 19% to 28% for the injured shoulders. This new PMHS test series will be used in a future work to develop a shoulder injury criterion for the ES-2re ATD that is relevant for the whole loading conditions spectrum of the military domain.

The study firstly aimed at looking whether sacroilium (SI) fractures could be sustained as unique pelvic injuries in side impact real world automotive accidents. Secondarily, the sacroilium fractures observed in conjunction with other pelvic fractures were analyzed to investigate the existence of injury association patterns. Two real world accident databases were searched for SI fractures. The occupants selected were front car passengers older than 16, involved in side, oblique or frontal impact, with AIS2+ pelvic injuries. In frontal impact, only the belted occupants were selected. The cases were sorted by the principal direction of force (dof) and the type of pelvic injury, namely SI, pubic rami, iliac wing, acetabulum, pubic symphysis, and sacrum injuries. The relation between SI and pubic rami injuries were investigated first. The first database is an accident database composed of cases collected in France by car manufacturers over a period of approximately 40 years. In total it contains approximately 28 000 occupants involved in all types of accident configurations. The occupant injuries, as well as the vehicle deformations, are described in detail. The second database gathered accident cases from 7 zones monitored in Great Britain over a period ranging from 1998 to 2005. All the cases collected include at least one towed away vehicle with at least one injured occupant. In total the database contains approximately 15 000 occupants. The occupant injuries are described in details and autopsy reports were screened when available. Results - In the French database, 39 occupants sustained SI fractures. Out of 39 SI fractures, 32 were associated with pubic rami fractures and 5 additional were associated with other pelvis ring fractures. In the UK database, 46 occupants sustained SI fractures. Out of 46 SI fractures, 34 were associated with pubic rami fractures and 8 additional were associated with other pelvis ring fractures. In side impact (dof 2, 3, 4, 8, 9 or 10 o'clock), in the cases where the side is known for both the SI fractures and pelvic ring injuries, both injuries were on the same side in 70% of the cases. Overall, out of 85 SI fractures cases, only one was clearly identified as occurring with no other pelvic injury and 3 with pelvic injuries other than pelvic ring injury. Conclusions - Overall, from the real world automotive accidents selected at any dof, SI fractures were observed to be associated with other pelvic ring fractures in 96% of the cases. On the reverse, in side impact (dof 2, 3, 4, 8, 9 or 10 o'clock in the LAB database), 89% of the pubic rami fractures occurred without any SI fractures. From a mechanical standing point, it suggests that the SI fractures is a structure more resistant than the rest of the pelvic ring. Overall, 70% of SI fractures were observed in various types of side impacts and 30% in frontal impacts.

In the last decade, extensive efforts have been made to understand the physics of submarining and its consequences in terms of abdominal injuries. For that purpose, 27 Post Mortem Human Subject (PMHS) tests were performed in well controlled conditions on a sled and response corridors were provided to assess the biofidelity of dummies or human body models. All these efforts were based on the 50th percentile male. In parallel, efforts were initiated to transfer the understanding of submarining and the prediction criteria to the THOR dummies. Both the biofidelity targets and the criteria were scaled down from the 50th percentile male to the 5th percentile THOR female. The objective of this project was to run a set of reference PMHS tests in order to check the biofidelity of the THOR F05 in terms of submarining. Three series of tests were performed on nine PMHS, the first one was designed to avoid submarining, the second and third ones were designed to result in submarining. In the first configuration, no submarining was observed in 3 cases out of 4 and only one iliac wing fracture occurred in one subject. In the second and third configurations, all subjects but one sustained submarining. In addition, two subjects out of three in the third configuration sustained substantial iliac wing fractures. Nevertheless, all configurations can be represented by at least one or several cases without any pelvis fracture. Corridors were constructed for the external forces and the PMHS kinematics. They are provided in this paper as new experimental references to assess the biofidelity of small female human surrogates in different configurations where submarining did or did not occur.

While the performance of Human Body Models (HBM) such as the GHBMC family has been improving, positioning them in application environments and personalizing them to match different body dimensions can be a challenge. The PIPER EU project aims to develop methods and tools to facilitate such tasks for leading HBMs including the GHBMC. The objectives are to report on the support of the GHBMC models in the PIPER tools, and to show two examples of applications.

The aim of this study was to investigate the sacroiliac joint injury mechanism. Two test configurations were selected from full scale car crashes conducted with the WorldSID 50th dummy resulting in high sacroiliac joint loads and low pubic symphysis force, i.e. severe conditions for the sacroiliac joint. The two test conditions were reproduced in laboratory using a 150-155 kg guided probe propelled respectively at 8 m/s and 7.5 m/s and with different shapes and orientations for the plate impacting the pelvis. Nine Post Mortem Human Subject (PMHS) were tested in each of the two configurations (eighteen PMHS in total). In order to get information on the time of fracture, eleven strain gauges were glued on the pelvic bone of each PMHS. Results - In the first configuration, five PMHS out of nine sustained AIS2+ pelvic injuries. All five presented sacroiliac joint injuries associated with pubic area injuries. In the second configuration, four specimens out of nine sustained AIS2+ pelvic injuries. Two of them presented sacroiliac joint fractures associated with pubic area injuries. The other two presented injuries at the pubic area and acetabulum only. The strain gauges signals suggested that the pubic fractures occurred before the sacroiliac joint fractures in the great majority of the cases (five cases out of seven). Conclusions - Even in the oblique impact conditions of the present study, the pubic symphysis area was observed to be the weakest zone of the pelvis and its failure the predominant cause of sacroiliac joint injuries. It was hypothesized that the failure of the pubic rami allowed the hemi-pelvis to rotate inward, and that this closing-book motion induced the failure of the sacroiliac joint.

Sled tests focused on pelvis behavior and submarining can be found in the literature. However, they were performed either with rigid seats or with commercial seats. The objective of this study was to get reference tests to assess the submarining ability of dummies in more realistic conditions than on rigid seat, but still in a repeatable and reproducible setup. For this purpose, a semi-rigid seat was developed, which mimics the behavior of real seats, although it is made of rigid plates and springs that are easy to reproduce and simulate with an FE model. In total, eight PMHS sled tests were performed on this semirigid seat to get data in two different configurations: first in a front seat configuration that was designed to prevent submarining, then in a rear seat configuration with adjusted spring stiffness to generate submarining. All subjects sustained extensive rib fractures from the shoulder belt loading. No pelvis fractures and no submarining were observed in the front seat configuration, but two subjects sustained lumbar vertebrae fractures. In the rear seat configuration, all subjects sustained pelvic fractures and demonstrated submarining. Corridors were constructed for the external forces and the PMHS kinematics. They are provided in this paper as new reference tests to assess the biofidelity of human surrogates in different configurations that either result in submarining or do not. In future, it is intended to analyze further seat and restraint system configurations to be able to define a submarining predictor.

The study focused on the validation of the 50th percentile male model — a detailed FE model of the thoracic segment of the human body developed within project Development of a Finite Element Model of the Human Thorax and Upper Extremities (THOMO) co-funded by the European Commission (7th Framework Programme). The model response was tested in three impact scenarios: frontal, lateral and oblique. The resulting impactor contact force vs. time and chest deflection vs. time responses were compared with experimental results. The strain profile of the 5th rib was checked with lateral and oblique strain profiles from post-mortem human subject (PMHS) experiments. The influence of heart and lungs on the mechanical response of the model was assessed and the material data configuration, giving the most biofidelic thorax behaviour, was identified.

The paper aims towards the development of virtual biomechanical human models as a support for design and optimization of not only passive and active safety systems used in various modes of transport. The simple usually multi-body system based models as well as the detailed finite element models are mentioned and a special hybrid model that benefit of both approaches is described. Scaling and personalisation is described as an important issue making the virtual human body models advantageous comparing to physical dummies. Finally special group of the active models including muscle tone and other activities as a challenge for future is presented.

Nine Post Mortem Human Subject (PMHS) tests were published by Luet et al. (2012) as a reference for submarining assessment. These tests suffered limitations, however, due to the rigid characteristics of the seat. The objective of this study is to assess the submarining ability of existing dummies in more realistic conditions, i.e. on a real seat. In total, nine PMHS sled tests were performed on a real seat to procure data in 3 different configurations. The tests were also duplicated with HII, HIII and THOR Mod Kit dummies to evaluate their behaviour in comparison to corridors built with 3 PMHS each. The external forces, the pelvis kinematics and the injury assessments are provided here. The dummy responses are compared to the PMHS corridors. No submarining was observed in the standard configuration. Iliac crest fractures and submarining were observed in the slouched position intended to generate submarining. Finally, for two subjects out of three, no iliac wing fracture and no submarining were observed in the slouched position with a lap‐belt load limitation at 4 kN and a pretension system.

UNLABELLED The WorldSID dummy can be equipped with both a pubic and a sacroiliac joint (S-I joint) loadcell. Although a pubic force criterion and the associated injury risk curve are currently available and used in regulation (ECE95, FMVSS214), as of today injury mechanisms, injury criteria, and injury assessment reference values are not available for the sacroiliac joint itself. The aim of this study was to investigate the sacroiliac joint injury mechanism. Three configurations were identified from full-scale car crashes conducted with the WorldSID 50th percentile male where the force passing through the pubis in all three tests was approximately 1500 N while the sacroiliac Fy/Mx peak values were 4500 N/50 Nm, 2400 N/130 Nm, and 5300 N/150 Nm, respectively. These tests were reproduced using a 150 kg guided probe impacting Post Mortem Human Subjects (PMHS) at 8 m/s, 5.4 m/s and 7.5 m/s. The shape and the orientation of the impacting face of the probe were selected to match the WorldSID pubic Fy and sacroiliac Fy/Mx loads of the three vehicle test configurations. Three PMHS were tested in each of the three configurations (nine PMHS in total). RESULTS In the first PMHS configuration, one specimen sustained an AIS 3 injury and one sustained an AIS 4 injury (an unstable pelvis with complete disruption of the posterior arch, a sacroiliac joint disruption associated with an iliac fracture, and a pubic symphysis separation). In the second configuration, all specimens sustained a fracture of the superior lateral iliac wing (AIS 2). In the third configuration, one specimen sustained a partial disruption of the anterior arch (AIS 2). Based on the data from strain gauges located on the pubic rami and near the sacroiliac joint, the pubic rami fractures were identified as occurring prior to the sacroiliac fractures. CONCLUSIONS Out of nine impactor tests performed, the PMHS S-I joint injuries were observed to consistently be associated with pelvic anterior arch fractures. In addition, from the injury sequences derived from strain gauges located on the specimen pelvises and on the injury assessments obtained by necropsy, the S-I joint fractures were observed to occur after the anterior arch fractures.

Despite the increasing knowledge of the thorax mechanics, the effects of inter-individual differences on the mechanical response are difficult to take into account. Several methods are available in the literature to refine the biofidelity corridors or to extrapolate them to other populations (eg: children, small females, large males). Because of the lack of concrete cases, the relevance of the assumptions is rarely investigated. In 2014, Baudrit et al. published data on thorax dynamic responses of small female and midsize male Post Mortem Human Subjects in side and forward oblique impact tests. The impactor mass was 23.4 kg for all the tests and the nominal impact speed was 4.3 m/s. The diameter of the rigid disk was 130 and 152 mm respectively for the small female specimens and for the midsize male specimens. The authors found that the maximum impact force was a function of the total body mass for each loading. They also reported that the ratio of dissipated energy on total deformation energy was almost constant and equal to 0.88. From these observations, a method was developed to aggregate data of the whole PMHS sample and to construct force time history and deflection time history corridors, for the 50th male and the 5th female, in pure lateral and in forward oblique tests. These corridors are provided in the paper and compared to the literature. Scaling factors derived from the corridors are also provided and used to evaluate the assumptions associated with the corridors provided in the literature.