Powering missions to the outer solar system is a significant challenge. These missions are typically powered by a Radioisotope Thermoelectric Generator (RTG). Though these sources provide stable power regardless of location in space, they are expensive to produce, difficult to integrate, and have both safety concerns as well as negative sociopolitical connotations. Perhaps most importantly, the availability of their fuel, plutonium -238, is scarce. Solar power is often considered a more attractive option. However, photovoltaic generation falls off at the distance from the sun squared. This drives the size of traditional solar generators to infeasible levels for deep space and their utilization at locations deeper than Jupiter is currently non-existent. Herein, a hypothetical solution, the PowerSail, and its application to a non-nuclear Uranus mission is presented. The PowerSail is a marriage of solar sails and thin-film solar cell assemblies. Herein the application of PowerSail spacecraft to a high priority science mission, the Applied Physics Laboratory's Uranus Probe and Explorer, is studied. The overall mission design along with key subsystems design changes are discussed, ultimately showing that a PowerSail could be utilized as a non-nuclear option to reach destinations very deep in our solar system. Key needed technology developments to make the PowerSail and such a mission a reality are given.

During late 2019 and early 2020, the Advanced Concepts Office design team at NASA's George C. Marshall Space Flight Center (MSFC) completed a concept study for a Solar Polar Imager (SPI) mission. The goal of the study was to perform a preliminary design of the spacecraft bus containing a minimum set of science instruments and supporting subsystems. The science goal of the SPI mission is to better understand the Sun and the heliosphere by observing the Sun from a high heliographic latitude. A highly inclined orbit (of 75°) allows helioseismology observations from a high latitude, providing measurements in the high latitude regions for the first time. The orbit also allows measurements of the photospheric magnetic fields in the polar regions, as well as direct measurements of the heliospheric magnetic field and solar wind. The high latitude gives the spacecraft a unique top-down view of coronal mass ejections (CMEs) that could affect space weather around Earth and allow the velocity and directions of these CMEs to be better quantified. Solar sail technology is chosen as the propulsion option necessary to deliver the spacecraft to a heliocentric circular orbit at 0.48 AU and an inclination of 75°. The sail area is restricted to 7000 m2, the maximum size that can be developed in the near term. The sail is also assumed to rotate at 1 rpm to avoid buckling of the supporting booms. The total launch mass is 349 kg, which consists of 233 kg for the SPI Bus, 52 kg for the solar sail and deployment mechanisms, and 64 kg for the Spin-up Bus/launch vehicle payload adapter. Dropping the Spin-up Bus after sail deployment, the characteristic acceleration of the sail is about 0.22 mm/s2. The resulting total mission time is just over 13 years, which includes a 3-year duration at the 75° inclination.

Solar sails have the potential to provide mass and cost savings for spacecraft traveling within the inner solar system. Companies like L’Garde have demonstrated sail manufacturability and various in-space deployment methods. The purpose of this study was to evaluate a current Mars sample return architecture and to determine how cost and mass would be reduced by incorporating a solar sail propulsion system. The team validated the design proposed by L’Garde, and scaled the design based on a trajectory analysis. Using the solar sail design reduced the required mass, eliminating one of the three launches required in the original architecture.

The Advanced Concepts Office at Marshall Space Flight Center completed a brief spacecraft design study for the 8-meter monolithic Advanced Technology Large Aperture Space Telescope (ATLAST-8m). This spacecraft concept provides all power, communication, telemetry, avionics, guidance and control, and thermal control for the observatory, and inserts the observatory into a halo orbit about the second Sun-Earth Lagrange point. The multidisciplinary design team created a simple spacecraft design that enables component and science instrument servicing, employs articulating solar panels for help with momentum management, and provides precise pointing control while at the same time fast slewing for the observatory.

The Advanced X-ray Timing Array (AXTAR) is a mission concept for X-ray timing of compact objects that combines very large collecting area, broadband spectral coverage, high time resolution, highly flexible scheduling, and an ability to respond promptly to time-critical targets of opportunity. It is optimized for submillisecond timing of bright Galactic X-ray sources in order to study phenomena at the natural time scales of neutron star surfaces and black hole event horizons, thus probing the physics of ultradense matter, strongly curved spacetimes, and intense magnetic fields. AXTAR's main instrument, the Large Area Timing Array (LATA) is a collimated instrument with 2-50 keV coverage and over 3 square meters effective area. The LATA is made up of an array of supermodules that house 2-mm thick silicon pixel detectors. AXTAR will provide a significant improvement in effective area (a factor of 7 at 4 keV and a factor of 36 at 30 keV) over the RXTE PCA. AXTAR will also carry a sensitive Sky Monitor (SM) that acts as a trigger for pointed observations of X-ray transients in addition to providing high duty cycle monitoring of the X-ray sky. We review the science goals and technical concept for AXTAR and present results from a preliminary mission design study.

The animation illustrates how the booms pivot and/or rotate during maneuvers to help maintain balance.