Abstract Background Acetogens, a diverse group of anaerobic autotrophic bacteria, are promising whole-cell biocatalysts that fix CO2 during their growth. However, because of energetic constraints, acetogens exhibit slow growth and the product spectrum is often limited to acetate. Enabling acetogens to form more valuable products such as volatile fatty acids during autotrophic growth is imperative for cementing their place in the future carbon neutral industry. Co-cultivation of strains with different capabilities has the potential to ease the limiting energetic constraints. The lactate-mediated co-culture of an Acetobacterium woodii mutant strain, capable of lactate production, with the Clostridium drakei SL1 type strain can produce butyrate and hexanoate. In this study, the preceding co-culture is characterized by comparison of monocultures and different co-culture approaches. Results C. drakei grew with H2 + CO2 as main carbon and energy source and thrived when further supplemented with D-lactate. Gas phase components and lactate were consumed in a mixotrophic manner with acetate and butyrate as main products and slight accumulation of hexanoate. Formate was periodically produced and eventually consumed by C. drakei. A lactate-mediated co-culture of the A. woodii [P bgaL _ldhD_NFP] strain, engineered for autotrophic lactate production, and C. drakei produced up to 4 ± 1.7 mM hexanoate and 18.5 ± 5.8 mM butyrate, quadrupling and doubling the respective titers compared to a non-lactate-mediated co-culture. Further co-cultivation experiments revealed the possible advantage of sequential co-culture over concurrent approaches, where both strains are inoculated simultaneously. Scanning electron microscopy of the strains revealed cell-to-cell contact between the co-culture partners. Finally, a combined pathway of A. woodii [P bgaL _ldhD_NFP] and C. drakei for chain-elongation with positive ATP yield is proposed. Conclusion Lactate was proven to be a well-suited intermediate to combine the high gas uptake capabilities of A. woodii with the chain-elongation potential of C. drakei. The cell-to-cell contact observed here remains to be further characterized in its nature but hints towards diffusive processes being involved in the co-culture. Furthermore, the metabolic pathways involved are still speculatory for C. drakei and do not fully explain the consumption of formate while H2 + CO2 is available. This study exemplifies the potential of combining metabolically engineered and native bacterial strains in a synthetic co-culture.

The use of algae as feedstock for industrial purposes, such as in bioethanol production, is desirable. During a search for new agarolytic marine bacteria, a novel Gram-stain-negative, strictly aerobic, and agarolytic bacterium, designated as TS8T, was isolated from algae in the harbour of the island of Susak, Croatia. The cells were rod-shaped and motile. The G+C content of the sequenced genome was 38.6 mol%. Growth was observed at 11–37 °C, with 0.5–13 % (w/v) NaCl, and at pH 6.0–9.0. The main fatty acids were summed feature 3 (C16 : 1 ω6c and/or C16 : 1 ω7c), summed feature 8 (C18 : 1 ω7c and/or C18 : 1 ω6c), and C16 : 0. The main respiratory quinone was ubiquinone-8. The major polar lipids were phosphatidylethanolamine and phosphatidylglycerol. Analysis of 16S rRNA gene sequences indicated that the newly isolated strain belongs to the genus Catenovulum. Based on 16S rRNA gene sequence data, strain TS8T is closely related to Catenovulum sediminis D2T (95.7 %), Catenovulum agarivorans YM01T (95.0 %), and Catenovulum maritimum Q1T (93.2 %). Digital DNA–DNA hybridization values between TS8T and the other Catenovulum strains were below 25 %. Based on genotypic, phenotypic, and phylogenetic data, strain TS8T represents a new species of the genus Catenovulum, for which the name Catenovulum adriaticum sp. nov. is proposed. The type strain is TS8T (=DSM 114830T=NCIMB 15451T).

Background The genus Eubacterium is quite diverse and includes several acetogenic strains capable of fermenting C1-substrates into valuable products. Especially, Eubacterium limosum and closely related strains attract attention not only for their capability to ferment C1 gases and liquids, but also due to their ability to produce butyrate. Apart from its well-elucidated metabolism, E. limosum is also genetically accessible, which makes it an interesting candidate to be an industrial biocatalyst. Results In this study, we examined genomic, phylogenetic, and physiologic features of E. limosum and the closest related species E. callanderi as well as E. maltosivorans . We sequenced the genomes of the six Eubacterium strains ‘FD’ (DSM 3662 T ), ‘Marburg’ (DSM 3468), ‘2A’ (DSM 2593), ‘11A’ (DSM 2594), ‘G14’ (DSM 107592), and ‘32’ (DSM 20517) and subsequently compared these with previously available genomes of the E. limosum type strain (DSM 20543 T ) as well as the strains ‘B2’, ‘KIST612’, ‘YI’ (DSM 105863 T ), and ‘SA11’. This comparison revealed a close relationship between all eleven Eubacterium strains, forming three distinct clades: E. limosum , E. callanderi , and E. maltosivorans . Moreover, we identified the gene clusters responsible for methanol utilization as well as genes mediating chain elongation in all analyzed strains. Subsequent growth experiments revealed that strains of all three clades can convert methanol and produce acetate, butyrate, and hexanoate via reverse β-oxidation. Additionally, we used a harmonized electroporation protocol and successfully transformed eight of these Eubacterium strains to enable recombinant plasmid-based expression of the gene encoding the fluorescence-activating and absorption shifting tag (FAST). Engineered Eubacterium strains were verified regarding their FAST-mediated fluorescence at a single-cell level using a flow cytometry approach. Eventually, strains ‘FD’ (DSM 3662 T ), ‘2A’ (DSM 2593), ‘11A’ (DSM 2594), and ‘32’ (DSM 20517) were genetically engineered for the first time. Conclusion Strains of E. limosum , E. callanderi , and E. maltosivorans are outstanding candidates as biocatalysts for anaerobic C1-substrate conversion into valuable biocommodities. A large variety of strains is genetically accessible using a harmonized electroporation protocol, and FAST can serve as a reliable fluorescent reporter protein to characterize genetically engineered cells. In total eleven strains have been assigned to distinct clades, providing a clear and updated classification. Thus, the description of respective Eubacterium species has been emended, improved, aligned, and is requested to be implemented in respective databases.

The establishment of sustainable processes for the production of commodity chemicals is one of today’s central challenges for biotechnological industries. The chemo-autotrophic fixation of CO2 and the subsequent production of acetate by acetogenic bacteria via anaerobic gas fermentation represents a promising platform for the ecologically sustainable production of high-value biocommodities via sequential fermentation processes. In this study, the applicability of acetate-containing cell-free spent medium of the gas-fermenting acetogenic bacterium A. woodii WP1 as the feeder strain for growth and the recombinant production of P. aeruginosa PAO1 mono-rhamnolipids in the well-established nonpathogenic producer strain P. putida KT2440 were investigated. Additionally, the potential possibility of a simplified production process without the necessary separation of feeder strain cells was elucidated via the cultivation of P. putida in cell-containing A. woodii culture broth. For these cultures, the content of both strains was investigated by examining the relative quantification of strain-exclusive genes via qPCR. The recombinant production of mono-rhamnolipids was successfully achieved with maximum titers of approximately 360–400 mg/L for both cell-free and cell-containing A. woodii spent medium. The reported processes therefore represent a successful proof of principle for gas fermentation-derived acetate as a potential sustainable carbon source for future recombinant rhamnolipid production processes by P. putida KT2440.

Increasing greenhouse gas emissions and decreasing fossil fuel supplies necessitate the development of alternative methods for producing petroleum-based commodities. Plastics are also primarily petroleum-based goods with rising demand, thus there is growing interest in plastic substitutes. Polyhydroxyalkanoates (PHAs) are naturally produced biopolymers that are utilized by microorganisms as a source of energy and carbon storage. Poly-3-hydroxybutyrate (PHB) is a member of the PHA family and is considered the most promising candidate to replace polyethylene (PE). PHB is naturally produced by Cupriavidus necator, but recombinant production has also been recently established. This study is the first to investigate the heterologous production of PHB with recombinant Acetobacterium woodii using CO2 + H2 as a carbon and energy source. The introduction of a synthetic PHB production pathway resulted in the production of 1.23 g/L CDW and 1.9% PHB/cell dry weight (CDW), which corresponds to a production of 23.5 mg/L PHB. PHB quantification was simplified using LipidGreen2 fluorescence measurements.

1,3-propanediol (1,3-PDO) is a valuable basic chemical, especially in the polymer industry to produce polytrimethylene terephthalate. Unfortunately, the production of 1,3-PDO mainly depends on petroleum products as precursors. Furthermore, the chemical routes have significant disadvantages, such as environmental issues. An alternative is the biobased fermentation of 1,3-PDO from cheap glycerol. Clostridium beijerinckii DSM 6423 was originally reported to produce 1,3-PDO. However, this could not be confirmed, and a genome analysis revealed the loss of an essential gene. Thus, 1,3-PDO production was genetically reinstalled. Genes for 1,3-PDO production from Clostridium pasteurianum DSM 525 and Clostridium beijerinckii DSM 15410 (formerly Clostridium diolis) were introduced into C. beijerinckii DSM 6423 to enable 1,3-PDO production from glycerol. 1,3-PDO production by recombinant C. beijerinckii strains were investigated under different growth conditions. 1,3-PDO production was only observed for C. beijerinckii [pMTL83251_Ppta-ack_1,3-PDO.diolis], which harbors the genes of C. beijerinckii DSM 15410. By buffering the growth medium, production could be increased by 74%. Furthermore, the effect of four different promoters was analyzed. The use of the constitutive thlA promoter from Clostridium acetobutylicum led to a 167% increase in 1,3-PDO production compared to the initial recombinant approach.

Propionate is an important platform chemical that is available through petrochemical synthesis. Bacterial propionate formation is considered an alternative, as bacteria can convert waste substrates into valuable products. In this regard, research primarily focused on propionibacteria due to high propionate titers achieved from different substrates. Whether other bacteria could also be attractive producers is unclear, mostly because little is known about these strains. Therefore, two thus far less researched strains, Anaerotignum propionicum and Anaerotignum neopropionicum, were investigated with regard to their morphologic and metabolic features. Microscopic analyses revealed a negative Gram reaction despite a Gram-positive cell wall as well as surface layers for both strains. Furthermore, growth, product profiles, and the potential for propionate formation from sustainable substrates, i.e., ethanol or lignocellulosic sugars, were assessed. Results showed that both strains can oxidize ethanol to different extents. While A. propionicum only partially used ethanol, A. neopropionicum converted 28.3 mM ethanol to 16.4 mM propionate. Additionally, the ability of A. neopropionicum to produce propionate from lignocellulose-derived substrates was analyzed, leading to propionate concentrations of up to 14.5 mM. Overall, this work provides new insights into the physiology of the Anaerotignum strains, which can be used to develop effective propionate producer strains.

The depletion of fossil fuel resources and the CO2 emissions coupled with petroleum-based industrial processes present a relevant issue for the whole of society. An alternative to the fossil-based production of chemicals is microbial fermentation using acetogens. Acetogenic bacteria are able to metabolize CO or CO2 (+H2) via the Wood-Ljungdahl pathway. As isopropanol is widely used in a variety of industrial branches, it is advantageous to find a fossil-independent production process. In this study, Acetobacterium woodii was employed to produce isopropanol via plasmid-based expression of the enzymes thiolase A, CoA-transferase, acetoacetate decarboxylase and secondary alcohol dehydrogenase. An examination of the enzymes originating from different organisms led to a maximum isopropanol production of 5.64 ± 1.08 mM using CO2 + H2 as the carbon and energy source. To this end, the genes thlA (encoding thiolase A) and ctfA/ctfB (encoding CoA-transferase) of Clostridium scatologenes, adc (encoding acetoacetate decarboxylase) originating from C. acetobutylicum and sadH (encoding secondary alcohol dehydrogenase) of C. beijerinckii DSM 6423 were employed. Since bottlenecks in the isopropanol production pathway are known, optimization of the strain was investigated, resulting in a 2.5-fold increase in isopropanol concentration.

Biotechnological processes at biorefineries are considered one of the most attractive alternatives for valorizing biomasses by converting them into bioproducts, biofuels, and bioenergy. For example, biodiesel can be obtained from oils and grease but generates glycerol as a byproduct. Glycerol recycling has been studied in several bioprocesses, with one of them being its conversion to 1,3-propanediol (1,3-PDO) by Clostridium. Clostridium beijerinckii is particularly interesting because it can produce a range of industrially relevant chemicals, including solvents and organic acids, and it is non-pathogenic. However, while Clostridium species have many potential advantages as chassis for synthetic biology applications, there are significant limitations when considering their use, such as their limited genetic tools, slow growth rate, and oxygen sensitivity. In this work, we carried out the overexpression of the genes involved in the synthesis of 1,3-PDO in C. beijerinckii Br21, which allowed us to increase the 1,3-PDO productivity in this strain. Thus, this study contributed to a better understanding of the metabolic pathways of glycerol conversion to 1,3-PDO by a C. beijerinckii isolate. Also, it made it possible to establish a transformation method of a modular vector in this strain, therefore expanding the limited genetic tools available for this bacterium, which is highly relevant in biotechnological applications.

Solvents such as butanol are important platform chemicals and are often produced from petrochemical sources. Production of butanol and other compounds from renewable and sustainable resources can be achieved by solventogenic bacteria, such as the hyper-butanol producer Clostridium saccharoperbutylacetonicum. Its sol operon consists of the genes encoding butyraldehyde dehydrogenase, CoA transferase, and acetoacetate decarboxylase (bld, ctfA, ctfB, adc) and the gene products are involved in butanol and acetone formation. It is important to understand its regulation to further optimize the solvent production. In this study, a new long non-coding antisense transcript complementary to the complete sol operon, now called Assolrna, was identified by transcriptomic analysis and the regulatory mechanism of Assolrna was investigated. For this purpose, the promoter-exchange strain C. saccharoperbutylacetonicum ΔP asr::P asr** was constructed. Additionally, Assolrna was expressed plasmid-based under control of the native P asr promoter and the lactose-inducible P bgaL promoter in both the wild type and the promoter-exchange strain. Solvent formation was strongly decreased for all strains based on C. saccharoperbutylacetonicum ΔP asr::P asr** and growth could not be restored by plasmid-based complementation of the exchanged promoter. Interestingly, very little sol mRNA expression was detected in the strain C. saccharoperbutylacetonicum ΔP asr::P asr** lacking Assolrna expression. Butanol titers were further increased for the overexpression strain C. saccharoperbutylacetonicum [pMTL83151_asr_P bgaL ] compared to the wild type. These results suggest that Assolrna has a positive effect on sol operon expression. Therefore, a possible stabilization mechanism of the sol mRNA by Assolrna under physiological concentrations is proposed.

The carboxylic acid propionate is a valuable platform chemical with applications in various fields. The biological production of this acid has become of great interest as it can be considered a sustainable alternative to petrochemical synthesis. In this work, Clostridium saccharoperbutylacetonicum was metabolically engineered to produce propionate via the acrylate pathway. In total, the established synthetic pathway comprised eight genes encoding the enzymes catalyzing the conversion of pyruvate to propionate. These included the propionate CoA-transferase, the lactoyl-CoA dehydratase, and the acryloyl-CoA reductase from Anaerotignum neopropionicum as well as a D -lactate dehydrogenase from Leuconostoc mesenteroides subsp. mesenteroides . Due to difficulties in assembling all genes on one plasmid under the control of standard promoters, the P tcdB - tcdR promoter system from Clostridium difficile was integrated into a two-plasmid system carrying the acrylate pathway genes. Several promoters were analyzed for their activity in C. saccharoperbutylacetonicum using the fluorescence-activating and absorption-shifting tag (FAST) as a fluorescent reporter to identify suitable candidates to drive tcdR expression. After selecting the lactose-inducible P bgaL promoter, engineered C. saccharoperbutylacetonicum strains produced 0.7 mM propionate upon induction of gene expression. The low productivity was suspected to be a consequence of a metabolic imbalance leading to acryloyl-CoA accumulation in the cells. To even out the proposed imbalance, the propionate-synthesis operons were rearranged, thereby increasing the propionate concentration by almost four-fold. This study is the first one to report recombinant propionate production using a clostridial host strain that has opened a new path towards bio-based propionate to be improved further in subsequent work. Key points • Determination of promoter activities in C. saccharoperbutylacetonicum using FAST. • Implementation of propionate production in C. saccharoperbutylacetonicum. • Elevation of propionate production by 375% to a concentration of 3 mM.

The capability of four genetically modified Acetobacterium woodii strains for improved production of acetone from CO2 and hydrogen was tested. The acetone biosynthesis pathway was constructed by combining genes from Clostridium acetobutylicum and Clostridium aceticum. Expression of acetone production genes was demonstrated in all strains. In bioreactors with continuous gas supply, all produced acetic acid, acetone, and, surprisingly, isopropanol. The production of isopropanol was caused by an endogenous secondary alcohol dehydrogenase (SADH) activity at low gas-feeding rate. Although high amounts of the natural end product acetic acid of A. woodii were formed,14.5 mM isopropanol and 7.6 mM acetone were also detected, showing that this is a promising approach for the production of new solvents from C1 gases. The highest acetic acid, acetone, and isopropanol production was detected in the recombinant A. woodii [pJIR750_ac1t1] strain, with final concentrations of 438 mM acetic acid, 7.6 mM acetone, and 14.5 mM isopropanol. The engineered strain A. woodii [pJIR750_ac1t1] was found to be the most promising strain for acetone production from a gas mixture of CO2 and H2 and the formation of isopropanol in A. woodii was shown for the first time.

Anaerobic bacteria are promising biocatalysts to produce industrially relevant products from nonfood feedstocks. Several anaerobes are genetically accessible, and various molecular tools for metabolic engineering are available. Still, the use of bright fluorescent reporters, which are commonly used in molecular biological approaches is limited under anaerobic conditions. Therefore, the establishment of different anaerobic fluorescent reporter proteins is of great interest. Here, we present the establishment of the green- and red-fluorescent reporter proteins greenFAST and redFAST for use in different solventogenic and acetogenic bacteria. Green fluorescence of greenFAST was bright in Clostridium saccharoperbutylacetonicum, Clostridium acetobutylicum, Acetobacterium woodii, and Eubacterium limosum, while only C. saccharoperbutylacetonicum showed bright red fluorescence when producing redFAST. We used both reporter proteins in C. saccharoperbutylacetonicum for multicolor approaches. These include the investigation of the co-culture dynamics of metabolically engineered strains. Moreover, we established a tightly regulated inducible two-plasmid system and used greenFAST and redFAST to track the coexistence and interaction of both plasmids under anaerobic conditions in C. saccharoperbutylacetonicum. The establishment of greenFAST and redFAST as fluorescent reporters opens the door for further multicolor approaches to investigate cell dynamics, gene expression, or protein localization under anaerobic conditions.

Clostridium aurantibutyricum, Clostridium felsineum and Clostridium roseum share a very high similarity based on multi--locus sequence analysis. In this study, their correct taxonomic status was determined using genomic and phenotypic investigations. Average nucleotide identity based on MUMmer alignment of the genomes and in silico DNA-DNA hybridization resulted in values of 98.55-100 and 78.7-100 %, respectively, strongly indicating that all strains are members of the same species. In addition, morphological investigations, fatty acid analyses and substrate utilization tests revealed no striking differences between the strains. Therefore, we propose the reclassification of C. aurantibutyricum and C. roseum as later heterotypic synonyms of C. felsineum. The type strain is lodged in several culture collections (ATCC 17788T=DSM 794T=NCIMB 10690T).

Platform chemicals such as butyrate are usually produced chemically from crude oil, resulting in the carry-over of harmful compounds. The selective production of butyrate using sustainable resources or waste without harmful by-products can be achieved by bacteria such as clostridia.

Lactate has various uses as industrial platform chemical, poly-lactic acid precursor or feedstock for anaerobic co-cultivations. The aim of this study was to construct and characterise Acetobacterium woodii strains capable of autotrophic lactate production. Therefore, the lctBCD genes, encoding the native Lct dehydrogenase complex, responsible for lactate consumption, were knocked out. Subsequently, a gene encoding a D-lactate dehydrogenase (LDHD) originating from Leuconostoc mesenteroides was expressed in A. woodii, either under the control of the anhydrotetracycline-inducible promoter Ptet or under the lactose-inducible promoter PbgaL. Moreover, LDHD was N-terminally fused to the oxygen-independent fluorescence-activating and absorption-shifting tag (FAST) and expressed in respective A. woodii strains. Cells that produced the LDHD fusion protein were capable of lactate production of up to 18.8 mM in autotrophic batch experiments using H2 + CO2 as energy and carbon source. Furthermore, cells showed a clear and bright fluorescence during exponential growth, as well as in the stationary phase after induction, mediated by the N-terminal FAST. Flow cytometry at the single-cell level revealed phenotypic heterogeneities for cells expressing the FAST-tagged LDHD fusion protein. This study shows that FAST provides a new reporter tool to quickly analyze gene expression over the course of growth experiments of A. woodii. Consequently, fluorescence-based reporters allow for faster and more targeted optimization of production strains.Key points •Autotrophic lactate production was achieved with A. woodii. •FAST functions as fluorescent marker protein in A. woodii. •Fluorescence measurements on single-cell level revealed population heterogeneity.

Gas fermentation is a technology for producing platform chemicals as well as fuels and one of the most promising alternatives to petrochemicals. Medium-chained acids and alcohols such as hexanoate and hexanol are particularly interesting due to their versatile application. This study elucidated the pathway of chain elongation in native C6 compound-producing acetogens. Essential genes of Clostridium carboxidivorans for synthesis of medium-chained acids and alcohols were identified in order to demonstrate their catalytic activity in the acetogenic model organism Acetobacterium woodii. Two such gene clusters were identified, which are responsible for conversion of acetyl-CoA to butyryl-CoA by reverse beta-oxidation. Using RT-PCR it could be demonstrated that only genes of cluster 1 are expressed constitutively with simultaneous formation of C6 compounds. Based on genes from C. carboxidivorans, a modular hexanoyl-CoA synthesis (hcs) plasmid system was constructed and transferred into A. woodii. With the recombinant A. woodii strains AWO [pPta_hcs1], AWO [pPta_hcs2], AWO [pTet_hcs1], and AWO [pTet_hcs2] butyrate and hexanoate production under heterotrophic (1.22-4.15 mM hexanoate) and autotrophic conditions (0.48-1.56 mM hexanoate) with both hcs clusters could be detected. hcs Cluster 1 from C. carboxidivorans was transferred into the ABE-fermenting strain Clostridium saccharoperbutylacetonicum as well. For further analysis, genes were also cloned into the hcs plasmid system individually. The resulting recombinant C. saccharoperbutylacetonicum strains with just individual genes neither produced hexanoate nor hexanol, but the strains containing the entire gene cluster were capable of chain elongation. A production of 0.8 mM hexanoate and 5.2 mM hexanol in the fermentation with glucose could be observed.

Background The interest in using methanol as a substrate to cultivate acetogens increased in recent years since it can be sustainably produced from syngas and has the additional benefit of reducing greenhouse gas emissions. Eubacterium limosum is one of the few acetogens that can utilize methanol, is genetically accessible and, therefore, a promising candidate for the recombinant production of biocommodities from this C1 carbon source. Although several genetic tools are already available for certain acetogens including E. limosum, the use of brightly fluorescent reporter proteins is still limited. Results In this study, we expanded the genetic toolbox of E. limosum by implementing the fluorescence-activating and absorption shifting tag (FAST) as a fluorescent reporter protein. Recombinant E. limosum strains that expressed the gene encoding FAST in an inducible and constitutive manner were constructed. Cultivation of these recombinant strains resulted in brightly fluorescent cells even under anaerobic conditions. Moreover, we produced the biocommodities butanol and acetone from methanol with recombinant E. limosum strains. Therefore, we used E. limosum cultures that produced FAST-tagged fusion proteins of the bifunctional acetaldehyde/alcohol dehydrogenase or the acetoacetate decarboxylase, respectively, and determined the fluorescence intensity and product concentrations during growth. Conclusions The addition of FAST as an oxygen-independent fluorescent reporter protein expands the genetic toolbox of E. limosum . Moreover, our results show that FAST-tagged fusion proteins can be constructed without negatively impacting the stability, functionality, and productivity of the resulting enzyme. Finally, butanol and acetone can be produced from methanol using recombinant E. limosum strains expressing genes encoding fluorescent FAST-tagged fusion proteins.

Clostridium ljungdahlii (C. ljungdahlii, CLJU) is natively endowed producing acetic acid, 2,3-butandiol, and ethanol consuming gas mixtures of CO2, CO, and H2 (syngas). Here, we present the syngas-based isobutanol formation using C. ljungdahlii harboring the recombinant amplification of the “Ehrlich” pathway that converts intracellular KIV to isobutanol. Autotrophic isobutanol production was studied analyzing two different strains in 3-L gassed and stirred bioreactors. Physiological characterization was thoroughly applied together with metabolic profiling and flux balance analysis. Thereof, KIV and pyruvate supply were identified as key “bottlenecking” precursors limiting preliminary isobutanol formation in CLJU[KAIA] to 0.02 g L–1. Additional blocking of valine synthesis in CLJU[KAIA]:ilvE increased isobutanol production by factor 6.5 finally reaching 0.13 g L–1. Future metabolic engineering should focus on debottlenecking NADPH availability, whereas NADH supply is already equilibrated in the current generation of strains.