The Tianlai Cylinder Pathfinder Array consists of three adjacent cylindrical reflectors fixed on the ground, each 40 m long and 15 m wide, with the cylinder axis oriented along the North-South (N-S) direction. Dual linear polarization feeds are distributed along the focus line, parallel to the cylinder axis. Measurement of the primary beam profile of these cylindrical reflectors is difficult, as they are too large to be placed in an anechoic chamber. While the beam profile along the East-West (E-W) direction can be measured with the transit observations of bright astronomical radio sources, the beam profile along the N-S direction remains very uncertain. We present a preliminary measurement of the beam profile of the Tianlai cylindrical antenna along both the N-S direction and E-W direction in the frequency range of 700-800 MHz, using a calibrator source carried by an unmanned aerial vehicle (UAV) flying in the far field. The beam profile of the Tianlai cylindrical antenna is determined from the analysis of the auto-correlation signals from the cylinder array correlator, taking into account the emitter antenna beam profile, itself measured with a dipole antenna on the ground. The accuracy of the UAV-based determination of the cylinder beam profiles is validated by comparing the results with the one derived from bright astronomical source transits, and with simulated beams.

The Tianlai Dish Pathfinder Array (TDPA) is a radio interferometer designed to test techniques for 21 cm intensity mapping in the post-reionization Universe as a means of measuring large-scale cosmic structure. Using nine nights of observations targeting the North Celestial Pole field, totaling approximately 107 hr of integration time, we analyze data in the frequency range 700-800 MHz (corresponding to redshift z similar to 0.9). We do the data format conversion, radio frequency interference flagging, calibration, imaging and point source subtraction, and foreground removal via Singular Value Decomposition. The spherically averaged power spectrum Delta(2)(k) is obtained. This work successfully establishes and validates a comprehensive data analysis framework for the TDPA. We identify key improvements including sky model refinement, increased integration time, and pipeline optimization that will enable future detection of the 21 cm signal through auto-correlation and cross-correlation with optical galaxy surveys.

We present the results of a small, low redshift spectroscopic survey of galaxies within 3 degrees of the North Celestial Pole (NCP) selected using V-band photometry obtained from the North Celestial Cap Survey (NCCS) (Gorbikov Brosch 2014). The purpose of the current survey is to create a redshift space template for 21 cm emission from neutral hydrogen with which to correlate radio line intensity observations by the Tianlai dish and cylinder interferometers. A total of 898 redshifts were obtained from the 2102 extended objects in the NCCS with m_V < 19 in the survey area. After accounting for extinction, the survey geometry and selection effects, the number density and clustering pattern of galaxies in the redshift catalog are consistent with other low redshift surveys. We were also able to identify 11 galaxy cluster candidates from this redshift catalog.

This work describes the design and implementation of optics for EXCLAIM, the EXperiment for Cryogenic Large-Aperture Intensity Mapping. EXCLAIM is a balloon-borne telescope that will measure integrated line emission from carbon monoxide at redshifts z < 1 and ionized carbon ([CII]) at redshifts z = 2.5 − 3.5 to probe star formation over cosmic time in cross-correlation with galaxy redshift surveys. The EXCLAIM instrument is designed to observe at frequencies of 420–540 GHz using six microfabricated silicon integrated spectrometers with spectral resolving power R = 512 coupled to kinetic inductance detectors. A completely cryogenic telescope cooled to a temperature below 5 K provides low-background observations between narrow atmospheric lines in the stratosphere. Off-axis reflective optics use a 90-cm primary mirror to provide 4.2′ full-width at half-maximum resolution at the center of the EXCLAIM band over a field of view of 22.5′. Illumination of the 1.7 K cold stop combined with blackened baffling at multiple places in the optical system ensures low (<−40 dB) edge illumination of the primary to minimize spill onto warmer elements at the top of the dewar.

This paper presents the design,calibration,and survey strategy of the Fast Radio Burst (FRB) digital backend and its real-time data processing pipeline employed in the Tianlai Cylinder Pathfinder Array.The array,consisting of three parallel cylindrical reflectors and equipped with 96 dual-polarization feeds,is a radio interferometer array designed for conducting drift scans of the northern celestial semi-sphere.The FRB digital backend enables the formation of 96 digital beams,effectively covering an area of approximately 40 square degrees with the 3 dB beam.Our pipeline demonstrates the capability to conduct an automatic search of FRBs,detecting at quasi-realtime and classifying FRB candidates automatically.The current FRB searching pipeline has an overall recall rate of88%.During the commissioning phase,we successfully detected signals emitted by four well-known pulsars:PSR B0329+54,B2021+51,B0823+26,and B2020+28.We report the first discovery of an FRB by our array,designated as FRB 20220414A.We also investigate the optimal arrangement for the digitally formed beams to achieve maximum detection rate by numerical simulation.

The EXperiment for Cryogenic Large-Aperture Intensity Mapping (EXCLAIM) is a balloon-borne telescope designed to survey star formation over cosmological time scales using intensity mapping in the 420 - 540 GHz frequency range. EXCLAIM uses a fully cryogenic telescope coupled to six on-chip spectrometers featuring kinetic inductance detectors (KIDs) to achieve high sensitivity, allowing for fast integration in dark atmospheric windows. The telescope receiver is cooled to approximate to 1.7 K by immersion in a superfluid helium bath and enclosed in a superfluid-tight shell with a meta-material anti-reflection coated silicon window. In addition to the optics and the spectrometer package, the receiver contains the magnetic shielding, the cryogenic segment of the spectrometer readout, and the sub-Kelvin cooling system. A three-stage continuous adiabatic demagnetization refrigerator (CADR) keeps the detectors at 100 mK while a He-4 sorption cooler provides a 900 mK thermal intercept for mechanical suspensions and coaxial cables. We present the design of the EXCLAIM receiver and report on the flight-like testing of major receiver components, including the superfluid-tight receiver window and the sub-Kelvin coolers.

This paper describes the design of a 5.5:1 bandwidth feed antenna and reflector system, intended for use in hydrogen intensity mapping experiments. The system is optimized to reduce systematic effects that can arise in these experiments from scattering within the feed/reflector and cross-coupling between antennas. The proposed feed is an ultra wideband Vivaldi style design and was optimized to have a smooth frequency response, high gain, and minimal shadowing of the reflector dish. This feed can optionally include absorptive elements which reduce systematics but degrade sensitivity. The proposed reflector is a deep parabolic dish with $f/d = 0.216$ along with an elliptical collar to provide additional shielding. The procedure for optimizing these design choices is described.

Kinetic Inductance Detectors (KIDs) are an emerging technology useful for a wide variety of astronomy applications, including the Habitable Exoplanet Imaging Mission (HabEx), the Origins Space Telescope (OST), the Probe of Inflation and Cosmic Origins (PICO), and more. KIDs operate at cryogenic temperatures and can detect photons with high accuracy, sensitivity, and over a wide range of wavelengths. Though many KID models describe their performance well under certain operating conditions, some important pieces of physics related to quasiparticle dynamics are not yet either well understood or integrated into these models and can strongly affect device performance. In this paper we describe our framework for building an extended KID model, present the results of a quasiparticle diffusion simulation that incorporates scattering, cooling and diffusion, and discuss plans for the experimental testing of the model. We also discuss additional features to be added into future models that aim to capture a wide variety of potential scenarios encountered by researchers.

ABSTRACT Intensity mapping experiments are beginning to measure the spatial distribution of neutral atomic hydrogen H i to constrain cosmological parameters and the large-scale distribution of matter. However, models of the behaviour of H i as a tracer of matter are complicated by galaxy evolution. In this work, we examine the clustering of H i in relation to galaxy colour, stellar mass, and H i mass in IllustrisTNG at z = 0, 0.5, and 1. We compare the H i-red and H i-blue galaxy cross-power spectra, finding that H i-red has an amplitude 1.5 times greater than H i-blue at large scales. The cross-power spectra intersect at ≈3 Mpc in real space and ≈10 Mpc in redshift space, consistent with z ≈ 0 observations. We show that H i clustering increases with galaxy H i mass and depends weakly on detection limits in the range MH i ≤ 108 M⊙. In terms of M⋆, we find massive blue galaxies cluster more than less massive ones. Massive red galaxies, however, cluster the weakest amongst red galaxies. These opposing trends arise from central-satellite compositions. Despite these M⋆ trends, we find that the cross-power spectra are largely insensitive to detection limits in galaxy surveys. Counter-intuitively, all auto and cross-power spectra for red and blue galaxies and H i decrease with time at all scales. We demonstrate that processes associated with quenching contribute to this trend. The complex interplay between H i and galaxies underscores the importance of understanding baryonic effects when interpreting the large-scale clustering of H i, blue, and red galaxies at z ≤ 1.

The visibilities measured by radio astronomical interferometers include non-astronomical correlated signals that arise from the local environment of the array. These correlated signals are especially important in compact arrays such as those under development for 21[Formula: see text]cm intensity mapping. The amplitudes of the contaminated visibilities can exceed the expected 21[Formula: see text]cm signal and represent a significant systematic effect. We study the receiver noise radiated by antennas in compact arrays and develop a model for how it couples to other antennas. We apply the model to the Tianlai Dish Pathfinder Array (TDPA), a compact array of 16, 6-m dish antennas. The coupling model includes electromagnetic simulations, measurements with a network analyzer, and measurements of the noise of the receivers. We compare the model to drift-scan observations with the array and set requirements on the level of antenna cross-coupling for 21[Formula: see text]cm intensity mapping instruments. We find that for the TDPA, cross-coupling would have to be reduced by three orders of magnitude in order to contribute negligibly to the visibilities.

The Q&U Bolometric Interferometer for Cosmology (QL’BIC) is the first bolometric interferometer designed to measure the primordial B-mode polarization of the Cosmic Microwave Background (CMB). Bolometric interferometry is a novel technique that combines the sensitivity of bolometric detectors with the control of systematic effects that is typical of interferometry, both key features in the quest for the faint signal of the primordial B-modes. A unique feature is the so-called “spectral imaging”, i.e., the ability to recover the sky signal in several sub-bands within the physical band during data analysis. This feature provides an in-band spectral resolution of ∆v/v ~ 0.04 that is unattainable by a traditional imager. This is a key tool for controlling the Galactic foregrounds contamination. In this paper, we describe the principles of bolometric interferometry, the current status of the QU BIC experiment and future prospects.

Millimeter-wave signals need to be carried over distances of 1 meter or more with low loss forapplications in precision cosmology such as beam pattern measurements of antennas. We present a novel,particularly simple approach to convert from standard rectangular waveguide to an overmoded circularwaveguide and back again. We give a design for a transition from rectangular W-band (75-110 GHz)waveguide to overmoded circular waveguide and for long circular waveguides made of copper tubes. Themeasured loss of the transitions is below 0.25 dB and the loss in the circular waveguide is 0.7 dB over a 3m length, including circular waveguide joints at each end. This result is consistent with calculations

ABSTRACT This paper introduces a technique called needlet Karhunen–Loéve (NKL), which cleans both polarized and unpolarized foregrounds from H i intensity maps by applying a Karhunen–Loéve transform on the needlet coefficients. In NKL, one takes advantage of correlations not only along the line of sight, but also between different angular regions, referred to as ‘chunks’. This provides a distinct advantage over many of the standard techniques applied to map space that one finds in the literature, which do not consider such spatial correlations. Moreover, the NKL technique does not require any priors on the nature of the foregrounds, which is important when considering polarized foregrounds. We also introduce a modified version of Generalized Needlet Internal Linear Combination (GNILC), referred to as MGNILC, which incorporates an approximation of the foregrounds to improve performance. The NKL and MGNILC techniques are tested on simulated maps which include polarized foregrounds. Their performance is compared to the GNILC, generalized morphological component analysis, independent component analysis, and principal component analysis techniques. Two separate tests were performed. One at 1.84 < z < 2.55 and the other at 0.31 < z < 0.45. NKL was found to provide the best performance in both tests, providing a factor of 10–50 improvement over GNILC at $k \lt 0.1\, {\rm hMpc^{-1}}$ in the higher redshift case and $k \lt 0.03 \, {\rm hMpc^{-1}}$ in the lower redshift case. However, none of the methods were found to recover the power spectrum satisfactorily at all baryon acoustic oscillations scales.

Abstract This work presents the initial results of the drift-scan observation for the neutral hydrogen (Hi) intensity mapping survey with the Five-hundred-meter Aperture Spherical radio Telescope (FAST). The data analyzed in this work were collected in night observations from 2019 through 2021. The primary findings are based on 28 hr of drift-scan observation carried out over 7 nights in 2021, which covers 60 deg2 sky area. Our main findings are, first, our calibration strategy can successfully correct both the temporal and bandpass gain variation over the 4 hr drift-scan observation. Second, the continuum maps of the surveyed region are made with frequency resolution of 28 kHz and pixel area of 2.95 arcmin 2 . The pixel noise levels of the continuum maps are slightly higher than the forecast assuming T sys = 20 K, which are 36.0 mK (for 10.0 s integration time) at the 1050–1150 MHz band, and 25.9 mK (for 16.7 s integration time) at the 1323–1450 MHz band, respectively. Third, the flux-weighted differential number count is consistent with the NRAO-VLA Sky Survey (NVSS) catalog down to the confusion limit ∼7 mJy beam−1. Finally, the continuum flux measurements of the sources are consistent with those found in the literature. The difference in the flux measurement of 81 isolated NVSS sources is about 6.3%. Our research offers a systematic analysis for the FAST Hi intensity mapping drift-scan survey and serves as a helpful resource for further cosmology and associated galaxies sciences with the FAST drift-scan survey.

This Snowmass 2021 White Paper describes the Cosmic Microwave Background Stage 4 project CMB-S4, which is designed to cross critical thresholds in our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. We provide an overview of the science case, the technical design, and project plan.

Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the mapping speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interferometer for Cosmology) experiment: we describe its design, fabrication, experimental optimization and validation in the Technological Demonstrator configuration. The QUBIC cryogenic system is based on a large volume cryostat, using two pulse-tube refrigerators to cool at ~3K a large (~1 m^3) volume, heavy (~165kg) instrument, including the cryogenic polarization modulator, the corrugated feedhorns array, and the lower temperature stages; a 4He evaporator cooling at ~1K the interferometer beam combiner; a 3He evaporator cooling at ~0.3K the focal-plane detector arrays. The cryogenic system has been tested and validated for more than 6 months of continuous operation. The detector arrays have reached a stable operating temperature of 0.33K, while the polarization modulator has been operated from a ~10K base temperature. The system has been tilted to cover the boresight elevation range 20 deg -90 deg without significant temperature variations. The instrument is now ready for deployment to the high Argentinean Andes.

Hydrogen intensity mapping is a new field in astronomy that promises to make three-dimensional maps of the matter distribution of the Universe using the redshifted 21 cm line of neutral hydrogen gas (HI). Several ongoing and upcoming radio interferometers, such as Tianlai, CHIME, HERA, HIRAX, etc. are using this technique. These instruments are designed to map large swaths of the sky by drift scanning over periods of many months. One of the challenges of the observations is that the daytime data is contaminated by strong radio signals from the Sun. In the case of Tianlai, this results in almost half of the measured data being unusable. We try to address this issue by developing an algorithm for solar contamination removal (AlgoSCR) from the radio data. The algorithm is based on an eigenvalue analysis of the visibility matrix, and hence is applicable only to interferometers. We apply AlgoSCR to simulated visibilities, as well as real daytime data from the Tianlai dish array. The algorithm can remove most of the solar contamination without seriously affecting other sky signals and thus makes the data usable for certain applications.

Abstract. The Hydrogen Intensity and Real-time Analysis Experiment (HIRAX) is a radio interferometer array currently in development, with an initial 256-element array to be deployed at the South African Radio Astronomy Observatory Square Kilometer Array site in South Africa. Each of the 6 m, f  /  0.23 dishes will be instrumented with dual-polarization feeds operating over a frequency range of 400 to 800 MHz. Through intensity mapping of the 21 cm emission line of neutral hydrogen, HIRAX will provide a cosmological survey of the distribution of large-scale structure over the redshift range of 0.775  <  z  <  2.55 over ∼15,000 square degrees of the southern sky. The statistical power of such a survey is sufficient to produce ∼7  %   constraints on the dark energy equation of state parameter when combined with measurements from the Planck satellite. Additionally, HIRAX will provide a highly competitive platform for radio transient and HI absorber science while enabling a multitude of cross-correlation studies. We describe the science goals of the experiment, overview of the design and status of the subcomponents of the telescope system, and describe the expected performance of the initial 256-element array as well as the planned future expansion to the final, 1024-element array.

The EXperiment for Cryogenic Large-Aperture Intensity Mapping (EXCLAIM) will constrain star formation over cosmic time by carrying out a blind and complete census of redshifted carbon monoxide (CO) and ionized carbon ([CII]) emission in cross-correlation with galaxy survey data in redshift windows from the present to z=3.5 with a fully cryogenic, balloon-borne telescope. EXCLAIM will carry out extragalactic and Galactic surveys in a conventional balloon flight planned for 2023. EXCLAIM will be the first instrument to deploy µ-Spec silicon integrated spectrometers with a spectral resolving power R=512 covering 420-540 GHz. We summarize the design, science goals, and status of EXCLAIM.

The Q & U Bolometric Interferometer for Cosmology (QUBIC) is a cosmology experiment that aims to measure the B-mode polarization of the cosmic microwave background (CMB). Measurements of the primordial B-mode pattern of the CMB polarization are in fact among the most exciting goals in cosmology as it would allow testing of the inflationary paradigm. Many experiments are attempting to measure the B-modes, from the ground and the stratosphere, using imaging Stokes polarimeters. The QUBIC collaboration developed an innovative concept to measure CMB polarization using bolometric interferometry. This approach mixes the high sensitivity of bolometric detectors with the accurate control of systematics due to the interferometric layout of the instrument. We present the calibration results for the Technological Demonstrator, before its commissioning in the Argentinian observing site and preparation for first light.