Herein we describe the use of regioregular (rr-) and regiorandom (rra-) P3HT as models to study energy transfer in ordered and disordered single conjugated polymer chains. Single molecule fluorescence spectra and excitation/emission polarization measurements were compared with a Förster resonance energy transfer (FRET) model simulation. An increase in the mean single chain polarization anisotropy from excitation to emission was observed for both rr- and rra-P3HT. The peak emission wavelengths of rr-P3HT were at substantially lower energies than those of rra-P3HT. A simulation based on FRET in single polymer chain conformations successfully reproduced the experimental observations. These studies showed that ordered conformations facilitated efficient energy transfer to a small number of low-energy sites compared to disordered conformations. As a result, the histograms of spectral peak wavelengths for ordered conformations were centered at much lower energies than those obtained for disordered conformations. Collectively, these experimental and simulated results provide the basis for quantitatively describing energy transfer in an important class of conjugated polymers commonly used in a variety of organic electronics applications.

We have studied the conformational dynamics associated with the nanoscale DNA bending induced by human immunodeficiency virus type 1 (HIV-1) nucleocapsid (NC) protein using single-molecule Förster resonance energy transfer (SM-FRET). To gain molecular-level insights into how the HIV-1 NC locally distorts the structures of duplexed DNA segments, the dynamics, reversibility, and sequence specificity of the DNA bending behavior of NC have been systematically studied. We have performed SM-FRET measurements on a series of duplexed DNA segments with varying sequences, lengths, and local structures in the presence of the wide-type HIV-1 NC and NC mutants lacking either the basic N-terminal domain or the zinc fingers. On the basis of the SM-FRET results, we have proposed a possible mechanism for the NC-induced DNA bending in which both NC's zinc fingers and N-terminal domain are found to play crucial roles. The SM-FRET results reported here add new mechanistic insights into the biological behaviors and functions of HIV-1 NC as a retroviral DNA-architectural protein which may play critical roles in the compaction, nuclear import, and integration of the proviral DNA during the retroviral life cycle.

In contrast to the detailed understanding of inorganic materials, researchers lack a comprehensive view of how the properties of bulk organic materials arise from their individual components. For conjugated polymers to eventually serve as low cost semiconductor layers in electronic devices, researchers need to better understand their functionality. For organics, traditional materials science measurements tend to destroy the species of interest, especially at low concentrations. However, fluorescence continues to be a remarkably flexible, relatively noninvasive tool for probing the properties of individual molecules and allows researchers to carry out a broad range of experiments based on a relatively simple concept. In addition, the sensitivity of single-molecule spectroscopy allows researchers to see the properties of an individual component that would be masked in the bulk phase. In this Account, we examine several photophysical properties of different conjugated polymers using single-molecule spectroscopy. In these experiments, we probed the relationship between the conformation of single conjugated polymer chains and the distance scale and efficiency of energy transfer within the polymer. Recent studies used polarization anisotropy measurements on single polymer chains to study chain folding following spin-casting from solution. This Account summarizes the effects of monomer regioregularity and backbone rigidity, by comparing a regiorandom phenylene vinylene (MEH-PPV) with both a regiorandom and regioregular thiophene (P3HT). Synthesis of novel polymers allowed us to explore the role of different conformation-directing inclusions in a PPV backbone. We showed that these inclusions control the conformation of individual chains and that molecular dynamics can predict these structural effects. In situ solvent vapor annealing studies explored the dynamics of polymer chains as well as the effect of solvent evaporation on the structural equilibrium of the polymer. We observed that a slower rate of solvent evaporation results in a narrow population of highly ordered polymer chains. These highly ordered single chains serve as a model system to probe the effect of conformation on energy transfer following excitation in single MEH-PPV polymer chains in two distinct experiments. In the first, we correlated the anisotropy of the fluorescence emission of individual chains with the anisotropy of their fluorescence excitation. Using this data, we derived a model for energy transfer in a conjugated polymer, simulating chromophores along a chain, coupled via Förster energy transfer. In the second experiment, super-resolution measurements demonstrated the ability of single-molecule spectroscopy to directly visualize energy transfer along a polymer chain embedded in a model device environment. A capacitive device allowed for controlled localization of hole polarons onto the polymer chain. These positive charges subsequently quenched local excitations, providing insight into the range of energy transfer in these single polymer molecules. As researchers continue to characterize conjugated polymer films and develop methods for creating multichain systems, single-molecule techniques will provide a greater understanding of how polymer morphology influences interchain interactions and will lead to a richer description of the electronic properties of bulk conjugated polymer films.

Conjugated polymers (CPs) are promising materials for use in electronic applications, such as low-cost, easily processed organic photovoltaic (OPV) devices. Improving OPV efficiencies is hindered by a lack of a fundamental understanding of the photophysics in CP-based thin films that is complicated by their heterogeneous nanoscale morphologies. Here, we report on a poly(3-hexylthiophene)-block-poly(tert-butyl acrylate)-block-poly(3-hexylthiophene) rod-coil-rod triblock copolymer. In good solvents, this polymer resembles solutions of P3HT; however, upon the addition of a poor solvent, the two P3HT chains within the triblock copolymer collapse, affording a material with electronic spectra identical to those of a thin film of P3HT. Using this new system as a model for thin films of P3HT, we can attribute the low fluorescence quantum yield of films to the presence of a charge-transfer state, providing fundamental insights into the condensed phase photophysics that will help to guide the development of the next generation of materials for OPVs.

We recently reported the discovery of soliton-like electrogenerated chemiluminescence (ECL) waves from pure conjugated polymer films and gold-nanoparticles-doped polymer films. In addition to a more detailed study of these polymer systems by changing the film thickness and the distribution of local leaks, we also apply the ECL wave phenomenon to polymer blends of conjugated and nonconjugated polymers. Poly(9,9-dioctylfluorene-co-benzothiadiazole) (F8BT) is used as the active material that is oxidized and produces ECL with the presence of a co-reactant, tri-n-propylamine (TPA). Several factors such as film thickness, artificial leaks, and solubility of doped polymers are examined for their effects on the ECL behavior. When polystyrene (PS), less soluble in the electrolyte, is blended with F8BT, dotted ECL signals are observed and transported as waves. When poly(methyl methacrylate) (PMMA), more soluble in the electrolyte, is blended with F8BT, PMMA serves as local scratches and ECL waves are triggered simultaneously from the whole film.

Conjugated polymers are applied widely in organic optoelectronic devices. The performance of these devices depends critically on polymer morphology, which can be modified by solvent vapour annealing. This process has now been controlled on mesoscopic length scales, bridging the gap between single-molecule and bulk studies, and revealing long-range energy transport in ordered polymer aggregates.

We study the electrochemical oxidation waves of conjugated polymers by examining photoluminescence (PL) quenching and electrogenerated chemiluminescence (ECL) of poly(9,9-dioctylfluorene-co-benzothiadiazole) (F8BT). Different factors such as the anion concentration, the anion size, the electrochemical potential, and the coreactant concentration are investigated for their effects on the behavior of the oxidation waves. Our results show that the wave speeds of PL quenching or ECL can be increased by increasing the anion concentration, decreasing the anion size, or increasing the electrochemical potentials. In addition, the intensity of ECL can be controlled by the coreactant concentration. The transition from pinned to free ECL waves is also studied when an intermediate coreactant concentration is used. These results provide useful insights for understanding the electrochemical oxidation wave phenomenon.

This paper describes the simultaneous measurement of excitation and emission anisotropy to visualize energy transfer in single chains of the prototypical conjugated polymer MEH-PPV, for samples with >70% of the single chains organized into extended, rod-like conformations. The uniformity and high degree of order of the single molecules in these experiments has allowed direct comparison of our experimental data to energy-transfer simulations in model polymer chains. Increases in average anisotropy from 0.62 to 0.74 from excitation to emission and average changes of <15° to the in-plane dipole principal orientation axis confirmed that energy was transferred to a relatively small number of sites in these highly ordered chains. This organization persisted even at large molecular weights (M(n) = 850 kDa). Electronic energy transfer in highly anisotropic model chains was simulated using an incoherent Förster-type mechanism to generate modulation depth histograms in good agreement with the observed data, as well as ensemble emission energies consistent with previously reported results. In these ordered model chains, excitons migrated an average of 6 nm before emission. This distance, far larger than the radius for single-step FRET, implies that energy transfer in MEH-PPV is a multistep funneling process.

For conjugated polymer materials, there is currently a major gap in understanding between the fundamental properties observed in single molecule measurements and the bulk electronic properties extracted from measurements of highly heterogeneous thin films. New materials and methodologies are needed to follow the evolution from single chain to bulk film properties as multiple chains begin to Interact. In this work, we used a controlled solvent vapor annealing process to assemble single chains of phenylene-vinylene conjugated polymers into aggregates that can be individually spectroscopically interrogated. This approach allowed us to probe the effects of interchain coupling in isolated conjugated polymer nanodomains of controlled size, By assembling these aggregates from building blocks of both pristine MEH-PPV and MEH-PPV derivatives containing structure-directing ortho- or para-terphenyl inclusions, we were able to control the ordering of these nanodomains as measured by single aggregate polarization anisotropy measurments. Depending on the individual chain constituents, these aggregates varied from highly anisotropic to nearly isotropic respectively facilitating or inhibiting interchain coupling. From the single chain fluorescence lifetimes, we demonstrated that these structure directing inclusions effectively break the phenylene-vinylene conjugation, allowing us to differentiate interchain electronic effects from those due to hyper-extended conjugation. We observed well-defined bathochromic shifts in the fluorescence spectra of the aggregates containing extensive interchain Interactions, indicating that low-energy exciton traps In MEH-PPV are the result of coupling interactions between neighboring chain segments. These results demonstrate the power of the synthetic inclusion approach to control properties at not Just the single chain level, but as a comprehensive approach toward ground-up design of bulk electronic properties.

By using single-molecule spectroscopy (SMS) several effects of solvent vapor induced annealing (SVA) were studied directly on single conjugated polymers, e.g.: SVA-induced translocations, folding/unfolding dynamics, and changes in the morphological order. It is shown that single chains can be trapped by spin-coating in a disordered conformation and subsequent SVA leads to an equilibrated, highly ordered conformation.

In conjugated polymers, radiative recombination of excitons (electron-hole pairs) competes with nonradiative thermal relaxation pathways. We visualized exciton quenching induced by hole polarons in single-polymer chains in a device geometry. The distance-scale for quenching was measured by means of a new subdiffraction, single-molecule technique-bias-modulated intensity centroid spectroscopy-which allowed the extraction of a mean centroid shift of 14 nanometers for highly ordered, single-polymer nanodomains. This shift requires energy transfer over distances an order of magnitude greater than previously reported for bulk conjugated polymers and far greater than predicted by the standard mechanism for exciton quenching, the unbiased diffusion of free excitons to quenching sites. Instead, multistep "energy funneling" to trapped, localized polarons is the probable mechanism for polaron-induced exciton quenching.

A new phenomenon is presented in which electrogenerated chemiluminescence (ECL) is generated and propagates laterally as self-reinforcing waves as a result of the oxidation of a poly(9,9-dioctylfluorene-co-benzothiadiazole) thin film. In an ordered array of Au electrode posts that act as effective ECL nucleation sites, soliton-like waves were observed to expand from each site and annihilate upon collision with each other. Simulations of the ECL response supported the experimental observations that the ECL waves propagate at a constant speed. A correlated diffusion mechanism involving the correlated motion of ions, injected holes, and solvent molecules is proposed to interpret the experimental data qualitatively. A rapid increase in the diffusion coefficient of these species in the polymer results in a sharp interface between non-oxidized and oxidized polymer phases wherein the electrochemical (EC) oxidation and mass transport of all pertinent species take place. EC oxidation of conjugated polymers of this type has important implications for the understanding of these materials and their modes of operation in EC conjugated polymer devices.

We use first-principles computational methods to examine hole trapping in organic molecular crystals. We present a computational scheme based on the tuning of the fraction of exact exchange in hybrid density functional theory to eliminate the many-electron self-interaction error. With small organic molecules, we show that this scheme gives accurate descriptions of ionization and dimer dissociation. We demonstrate that the excess hole in perfect molecular crystals forms self-trapped molecular polarons. The predicted absolute ionization potentials of both localized and delocalized holes are consistent with experimental values.

The Horner method was used to synthesize random copolymers of poly(2-methoxy-5-(2'-ethylhexyloxy)-p-phenylene vinylene) (MEH-PPV) that incorporated different backbone-directing monomers. Single-molecule polarization absorption studies of these new polymers demonstrate that defects that preserve the linear backbone of PPV-type polymers assume the highly anisotropic configurations found in defect-free MEH-PPV. Rigid defects that are bent lower the anisotropy of the single chain, and saturated defects that provide rotational freedom for the chain backbone allow for a wide variety of possible configurations. Molecular dynamics simulations of model defect PPV oligomers in solution demonstrate that defect-free and linearly defected oligomers remain extended while the bent and saturated defects tend toward more folded, compact structures.

Einen Blick auf Details der Abläufe beim Tempern konjugierter Polymere ermöglicht die direkte Untersuchung des durch Lösungsmitteldämpfe ausgelösten Temperns (SVA) an einzelnen Ketten konjugierter Polymere in einem dünnen Polymethylmethacrylatfilm mithilfe der Einzelmolekülspektroskopie. In der Zuschrift auf S. 2305 ff. beschreiben J. Vogelsang et al. die Beobachtung von SVA-induzierten Translokationen, Faltungs/Entfaltungs-Dynamiken und Änderungen der morphologischen Ordnung der Polymerketten.