Septins are cytoskeletal proteins that assemble into hetero-oligomeric complexes, which polymerize into filaments to regulate many cellular processes, including cytokinesis and membrane remodeling. In Caenorhabditis elegans, the core septin complex is a tetramer composed of two copies each of two different subunits, UNC-59 and UNC-61. Historically, low-resolution models suggested a subunit order of UNC-59-UNC-61-UNC-61-UNC-59 for the tetramer. However, this arrangement contradicted the positional conservation of septins observed in other species. Using cryo-EM, we obtained a structure for the tetramer with a global resolution of 2.7 Å, definitively establishing the subunit order to be UNC-61-UNC-59-UNC-59-UNC-61. This places UNC-59 at the center of the particle where it forms a homodimeric G-interface, confirming it to be a positional ortholog of human SEPT7. This arrangement is further supported by mutational/biophysical analyses. Despite the stability of the tetramer, the complex failed to polymerize into filaments in vitro, which we attribute to the structural instability of the terminal UNC-61 G-interfaces. Our results suggest that post-translational modifications or specific cellular factors may be required to initiate higher-order assembly in C. elegans. Furthermore, our structure reveals that while UNC-59 possesses key characteristics of the SEPT7 group, it also features unique structural adaptations that may be related to the unique arrangement of the C. elegans complex. We demonstrate that the previous misidentification of the subunit order within the tetramer likely stemmed from N-terminal domain swapping, reinforcing the importance of high-resolution structural studies for understanding the evolutionary history and the diversity of septins.

Snake-venom phospholipases A2 (PLA2s) are small, structurally conserved enzymes that contribute significantly to the pathophysiology of envenomation. Here, we report the purification and crystal structure of an Asp49-PLA2 isolated from the venom of Lachesis muta, a pit viper from the Peruvian Amazon. The enzyme was purified using ion-exchange and size-exclusion chromatography and exhibited phospholipase activity in a dose- and time-dependent egg-yolk degradation assay. Pure protein crystals were obtained in space group P6222 and diffracted to 2.36 Å resolution, with two molecules in the asymmetric unit. The structure reveals the canonical fold of catalytically active group II PLA2s, with a bound Ca2+ ion and a MES molecule in the active site of one monomer. Seven disulfide bonds stabilize the structure, although one bridge typically associated with the β-hairpin is absent and is replaced by a salt bridge as in other viperid PLA2s. PISA analysis suggests a potential tetrameric assembly composed of two AB dimers generating an interface between two A subunits (A-A'). Electrostatic surface mapping reveals a notable positively charged channel at the A-A' interface, like that seen for a basic PLA2 homodimer from Crotalus durissus terrificus in which the two active sites lie accessible to the membrane. This study presents the first structural and enzymatic analysis of an Asp49-PLA2 from L. muta and provides insights into its oligomeric assembly, electrostatic landscape and potential adaptations relevant to its role in venom toxicity.

To date, the most detailed structural characterization of septins has been undertaken on those from opisthokonts, where heterooligomeric complexes polymerize end-to-end into filaments stabilized by alternating G- and NC-interfaces. These filaments are involved in a wide range of essential intracellular processes involving membranes, cytoskeletal components and other binding partners. Their central GTP-binding G-domain is highly conserved and similar to that seen in small monomeric or dimeric GTP-binding proteins, which normally play roles in cell signaling. However, these small GTPases do not polymerize. How and when during evolution septins gained this unique capability is not fully understood. Here we provide seven new crystal structures of the single septin from the green alga, Chlamydomonas reinhardtii, in the form of different constructs, mutations, complexes and crystal forms. This has allowed us to describe the unusual properties of the NC-interface for the first time. These include a polyproline II helix in place of the conventional α0 helix, an extension to the first three β-strands, a novel polyacidic region not seen in opisthokonts and a flexible α6 helix whose curvature can vary depending on filament formation or not. This unusual NC-interface may represent a relatively unstable, primordial interaction which has subsequently evolved in opisthokonts to incorporate the more stable α0 helix, an event which occurred in parallel with the gene expansion which enabled the formation of their more robust heterofilaments.

Acetyl-CoA carboxylase (ACC) is an essential enzyme in fatty acid biosynthesis that catalyzes the formation of malonyl-CoA from acetyl-CoA. While structural studies on ACC components have largely focused on prokaryotes and higher plants, the assembly and molecular adaptations of ACC in microalgae remain underexplored. This study aimed to fill this gap by providing the first structural and evolutionary characterization of both biotin carboxylase (BC) and biotin carboxyl carrier protein (BCCP) from a microalga (Ankistrodesmus sp.). Phylogenetic analysis revealed distinct evolutionary trajectories for BC and BCCP, with BC forming a chlorophyte-specific clade closely related to other oleaginous species, while BCCP displayed two distinct isoforms within green algae, resulting from gene duplication. The crystallographic structure of BC was solved in its apo (1.75 Å) and ADP-Mg2+-bound (1.90 Å) states, revealing conserved conformational changes associated with cofactor binding. BCCP from Ankistrodesmus sp. displayed a unique QLGTF/H motif instead of the canonical AMKXM biotinylation motif, suggesting loss of biotinylation capacity. However, the presence of three additional lysines in the protruding thumb loop, with Lys95 as a candidate for biotin attachment, indicates potential compensatory adaptations. SEC-MALS and pull-down assays confirmed the formation of a stable 1:1 BC-BCCP complex, and circular dichroism showed increased thermal stability of the complex, supporting its structural stability. This study highlights unique structural adaptations in Ankistrodesmus sp. ACC, emphasizing the evolutionary plasticity of BC and BCCP. These insights provide a foundation for future investigations into ACC regulation in photosynthetic organisms and offer potential biotechnological applications for optimizing lipid production in microalgae.

L-Ascorbic acid (AsA, vitamin C) is a pivotal dietary nutrient with multifaceted importance in living organisms. In plants, the Smirnoff-Wheeler pathway is the primary route for AsA biosynthesis, and understanding the mechanistic details behind its component enzymes has implications for plant biology, nutritional science, and biotechnology. As part of an initiative to determine the structures of all six core enzymes of the pathway, the present study focuses on three of them in the model species Myrciaria dubia (camu-camu): GDP-D-mannose 3',5'-epimerase (GME), L-galactose dehydrogenase (L-GalDH), and l-galactono-1,4-lactone dehydrogenase (L-GalLDH). We provide insights into substrate and cofactor binding and the conformational changes they induce. The MdGME structure reveals a distorted substrate in the active site, pertinent to the catalytic mechanism. MdL-GalDH shows that the way in which NAD(+) association affects loop structure over the active site is not conserved when compared with its homologue in spinach. Finally, the structure of Mdl-GalLDH is described for the first time. This allows for the rationalization of previously identified residues which play important roles in the active site or in the formation of the covalent bond with FAD. In conclusion, this study enhances our understanding of AsA biosynthesis in plants, and the information provided should prove useful for biotechnological applications.

Septins are filamentous nucleotide-binding proteins which can associate with membranes in a curvature-dependent manner leading to structural remodelling and barrier formation. Ciona intestinalis, a model for exploring the development and evolution of the chordate lineage, has only four septin-coding genes within its genome. These represent orthologues of the four classical mammalian subgroups, making it a minimalist non-redundant model for studying the modular assembly of septins into linear oligomers and thereby filamentous polymers. Here, we show that C. intestinalis septins present a similar biochemistry to their human orthologues and also provide the cryo-EM structures of an octamer, a hexamer and a tetrameric sub-complex. The octamer, which has the canonical arrangement (2-6-7-9-9-7-6-2) clearly shows an exposed NC-interface at its termini enabling copolymerization with hexamers into mixed filaments. Indeed, only combinations of septins which had CiSEPT2 occupying the terminal position were able to assemble into filaments via NC-interface association. The CiSEPT7-CiSEPT9 tetramer is the smallest septin particle to be solved by Cryo-EM to date and its good resolution (2.7 Å) provides a well-defined view of the central NC-interface. On the other hand, the CiSEPT7-CiSEPT9 G-interface shows signs of fragility permitting toggling between hexamers and octamers, similar to that seen in human septins but not in yeast. The new structures provide insights concerning the molecular mechanism for cross-talk between adjacent interfaces. This indicates that C. intestinalis may represent a valuable tool for future studies, fulfilling the requirements of a complete but simpler system to understand the mechanisms behind the assembly and dynamics of septin filaments.

The molecular basis for septin filament assembly has begun to emerge over recent years. These filaments are essential for many septin functions which depend on their association with biological membranes or components of the cytoskeleton. Much less is known about how septins specifically interact with their binding partners. Here we describe the essential role played by the C-terminal domains in both septin polymerization and their association with the BD3 motif of the Borg family of Cdc42 effector proteins. We provide a detailed description, at the molecular level, of a previously reported interaction between BD3 and the NC-interface between SEPT6 and SEPT7. Upon ternary complex formation, the heterodimeric coiled coil formed by the C-terminal domains of the septins becomes stabilized and filament formation is promoted under conditions of ionic strength/protein concentration which are not normally permissible, likely by favouring hexamers over smaller oligomeric states. This demonstrates that binding partners, such as Borg's, have the potential to control filament assembly/disassembly in vivo in a way which can be emulated in vitro by altering the ionic strength. Experimentally validated models indicate that the BD3 peptide lies antiparallel to the coiled coil and is stabilized by a mixture of polar and apolar contacts. At its center, an LGPS motif, common to all human Borg sequences, interacts with charged residues from both helices of the coiled coil (K368 from SEPT7 and the conserved E354 from SEPT6) suggesting a universal mechanism which governs Borg-septin interactions.

Septins possess a conserved guanine nucleotide-binding (G) domain that participates in the stabilization of organized hetero-oligomeric complexes which assemble into filaments, rings and network-like structures. The fruit fly, Drosophila melanogaster, has five such septin genes encoding Sep1, Sep2, Sep4, Sep5 and Pnut. Here, we report the crystal structure of the heterodimer formed between the G-domains of Sep1 and Sep2, the first from an insect to be described to date. A G-interface stabilizes the dimer (in agreement with the expected arrangement for the Drosophila hexameric particle) and this bears significant resemblance to its human counterparts, even down to the level of individual amino acid interactions. On the other hand, a model for the G-interface formed between the two copies of Pnut which occupy the centre of the hexamer, shows important structural differences, including the loss of a highly favourable bifurcated salt-bridge network. Whereas wild-type Pnut purifies as a monomer, the reintroduction of the salt-bridge network results in stabilizing the dimeric interface in solution as shown by size exclusion chromatography and thermal stability measurements. Adaptive steered molecular dynamics reveals an unzipping mechanism for dimer dissociation which initiates at a point of electrostatic repulsion within the switch II region. Overall, the data contribute to a better understanding of the molecular interactions involved in septin assembly/disassembly.

Septins, often described as the fourth component of the cytoskeleton, are structural proteins found in a vast variety of living beings. They are related to small GTPases and thus, generally, present GTPase activity which may play an important (although incompletely understood) role in their organization and function. Septins polymerize into long non-polar filaments, in which each subunit interacts with two others by alternating interfaces, NC and G. In Saccharomyces cerevisiae four septins are organized in the following manner, [Cdc11-Cdc12-Cdc3-Cdc10-Cdc10-Cdc3-Cdc12-Cdc11]n in order to form filaments. Although septins were originally discovered in yeast and much is known regarding their biochemistry and function, only limited structural information about them is currently available. Here we present crystal structures of Cdc3/Cdc10 which provide the first view of the physiological interfaces formed by yeast septins. The G-interface has properties which place it in between that formed by SEPT2/SEPT6 and SEPT7/SEPT3 in human filaments. Switch I from Cdc10 contributes significantly to the interface, whereas in Cdc3 it is largely disorded. However, the significant negative charge density of the latter suggests it may have a unique role. At the NC-interface, we describe an elegant means by which the sidechain of a glutamine from helix α0 imitates a peptide group in order to retain hydrogen-bond continuity at the kink between helices α5 and α6 in the neighbouring subunit, thereby justifying the conservation of the helical distortion. Its absence from Cdc11, along with this structure's other unusual features are critically discussed by comparison with Cdc3 and Cdc10.

Several hydrolases have been described to degrade polyethylene terephthalate (PET) at moderate temperatures ranging from 25°C to 40°C. These mesophilic PET hydrolases (PETases) are less efficient in degrading this plastic polymer than their thermophilic homologs and have, therefore, been the subject of many protein engineering campaigns. However, enhancing their enzymatic activity through rational design or directed evolution poses a formidable challenge due to the need for exploring a large number of mutations. Additionally, evaluating the improvements in both activity and stability requires screening numerous variants, either individually or using high-throughput screening methods. Here, we utilize instead the design of chimeras as a protein engineering strategy to increase the activity and stability of Mors1, an Antarctic PETase active at 25°C. First, we obtained the crystal structure of Mors1 at 1.6 Å resolution, which we used as a scaffold for structure- and sequence-based chimeric design. Then, we designed a Mors1 chimera via loop exchange of a highly divergent active site loop from the thermophilic leaf-branch compost cutinase (LCC) into the equivalent region in Mors1. After restitution of an active site disulfide bond into this chimera, the enzyme exhibited a shift in optimal temperature for activity to 45°C and an increase in fivefold in PET hydrolysis when compared with wild-type Mors1 at 25°C. Our results serve as a proof of concept of the utility of chimeric design to further improve the activity and stability of PETases active at moderate temperatures.

Septins are membrane-associated, GTP-binding proteins that are present in most eukaryotes. They polymerize to play important roles as scaffolds and/or diffusion barriers as part of the cytoskeleton. α-Helical coiled-coil domains are believed to contribute to septin assembly, and those observed in both human SEPT6 and SEPT8 form antiparallel homodimers. These are not compatible with their parallel heterodimeric organization expected from the current model for protofilament assembly, but they could explain the interfilament cross-bridges observed by microscopy. Here, the first structure of a heterodimeric septin coiled coil is presented, that between SEPT14 and SEPT7; the former is a SEPT6/SEPT8 homolog. This new structure is parallel, with two long helices that are axially shifted by a full helical turn with reference to their sequence alignment. The structure also has unusual knobs-into-holes packing of side chains. Both standard seven-residue (heptad) and the less common 11-residue (hendecad) repeats are present, creating two distinct regions with opposite supercoiling, which gives rise to an overall straight coiled coil. Part of the hendecad region is required for heterodimerization and therefore may be crucial for selective septin recognition. These unconventional sequences and structural features produce a metastable heterocomplex that nonetheless has enough specificity to promote correct protofilament assembly. For instance, the lack of supercoiling may facilitate unzipping and transitioning to the antiparallel homodimeric state.

Protein 3D structure can be remarkably robust to the accumulation of mutations during evolution. On the other hand, sometimes a single amino acid substitution can be sufficient to generate dramatic and completely unpredictable structural consequences. In an attempt to rationally alter the preferences for the metal ion at the active site of a member of the Iron/Manganese superoxide dismutase family, two examples of the latter phenomenon were identified. Site directed mutants of SOD from Trichoderma reesei were generated and studied crystallographically together with the wild type enzyme. Despite being chosen for their potential impact on the redox potential of the metal, two of the mutations (D150G and G73A) in fact resulted in significant alterations to the protein quaternary structure. The D150G mutant presented alternative inter-subunit contacts leading to a loss of symmetry of the wild type tetramer, whereas the G73A mutation transformed the tetramer into an octamer despite not participating directly in any of the inter-subunit interfaces. We conclude that there is considerable intrinsic plasticity in the Fe/MnSOD fold that can be unpredictably affected by single amino acid substitutions. In much the same way as phenotypic defects at the organism level can reveal much about normal function, so too can such mutations teach us much about the subtleties of protein structure.