On December 5, 2022, an indirect drive fusion implosion on the National Ignition Facility (NIF) achieved a target gain G_{target} of 1.5. This is the first laboratory demonstration of exceeding "scientific breakeven" (or G_{target}>1) where 2.05 MJ of 351 nm laser light produced 3.1 MJ of total fusion yield, a result which significantly exceeds the Lawson criterion for fusion ignition as reported in a previous NIF implosion [H. Abu-Shawareb et al. (Indirect Drive ICF Collaboration), Phys. Rev. Lett. 129, 075001 (2022)PRLTAO0031-900710.1103/PhysRevLett.129.075001]. This achievement is the culmination of more than five decades of research and gives proof that laboratory fusion, based on fundamental physics principles, is possible. This Letter reports on the target, laser, design, and experimental advancements that led to this result.

Pulsed power generators create high-energy-density conditions by rapidly delivering an immense pulse of electrical current to a compact imploding load. Accurately measuring the shape and amplitude of this load current pulse is essential to understanding the behavior of all pulsed power experiments. At the Z Pulsed Power Facility, the closest-in load current measurements are provided by velocimetry techniques such as VISAR (velocity interferometer system for any reflector) and PDV (photonic Doppler velocimetry). Here, fiber-coupled interferometers measure the velocity history of an exploding metallic flyer plate that is embedded in the vertical walls of the current return can. The flyer plate is driven outward by the magnetic pressure from the load current such that magnetohydrodynamic modeling can be used to determine the load current waveform from the measured velocity history. In this paper, we present the first load current velocimetry measurements to be made from the horizontal top flyer plate that carries current radially inward from the return can to the load. These spatially resolved measurements, which span R = 5- 9 mm, are enabled by a transformative new velocimetry diagnostic-a line-imaging velocity interferometer called Z Line VISAR (ZLV)-whose optical performance overcomes the measurement challenges presented by the steep velocity gradients encountered on the top flyer plate. To validate ZLV's capabilities, a 14-MA, 100-ns experiment was conducted to losslessly couple current up the return can and radially inward across the top flyer plate. Comparisons between the ZLV data obtained from this experiment and two-dimensional magnetohydrodynamic simulations driven with the current measured on the return can indicate that the current delivery across the top flyer plate is indeed lossless to within the few-percent uncertainty of the ZLV data. Given that the current coupling is lossless, the experimental results are used to demonstrate that one-dimensional current unfold techniques can be applied to generate a radially resolved load current map from the ZLV velocity data. This analysis provides a template for how to use the ZLV diagnostic to determine the efficacy of current delivery in future experiments where losses may occur in close proximity to the load.

A line VISAR (Velocity Interferometer System for Any Reflector) has been designed and commissioned at the Sandia National Laboratory's Z-machine. The instrument consists of an F/2 collection system, beam transport, and an interferometer table that contains two Mach-Zehnder type interferometers and an eight channel Gated Optical Imaging (GOI) system. The VISAR probe laser operates at the 532 nm wavelength, and the GOI bandpass is 540-600 nm. The output of each interferometer is passed to an optical streak camera with four selectable sweep speeds. The system is designed with three interchangeable optics modules to select a full field of view of 1 mm, 2 mm, or 4 mm. The optical beam transport system connects the target image plane to the interferometers and the gated optical imagers. The target is integrated into a sacrificial final optics assembly that is integral to the transport beamline.

At the completion of the National Ignition Campaign NIF had about 36 different types of diagnostics. These were based on several decades of development on Nova and OMEGA and involved the whole US ICF community. A plan for a limited of NIF Diagnostics was documented by the Joint Central Diagnostic Team in the NIF Conceptual Design Report in 1994. These diagnostics and many more were installed diagnostics by two decades later. We give a short description of each of the 36 different types of NIC diagnostics grouped by the function of the diagnostics, namely target drive, target response and target assembly, stagnation and burn. A comparison of NIF diagnostics with the Nova diagnostics shows that the NIF diagnostic capability is broadly equivalent to that of Nova’s in 1999. NIF diagnostics have a much greater degree of automation and rigor than Nova’s and the NIF diagnostic suite incorporates some scientific innovation compared to Nova and OMEGA namely one much higher speed x-ray imager. Directions for future NIF diagnostics are discussed.

The National Ignition Facility (NIF), currently under construction at the Lawrence Livermore National Laboratory, is a stadium-sized facility containing a 192-beam, 1.8-megajoule, 500-terawatt, ultraviolet laser system together with a 10-meter diameter target chamber with room for nearly 100 experimental diagnostics. When completed, NIF will be the world's largest and most energetic laser experimental system, providing an international center to study inertial confinement fusion and the physics of matter at extreme energy densities and pressures. NIF's 192 energetic laser beams will compress fusion targets to conditions required for thermonuclear burn, liberating more energy than required to initiate the fusion reactions. Laser hardware is modularized into line replaceable units such as deformable mirrors, amplifiers, and multi-function sensor packages that are operated by the integrated computer control system (ICCS). ICCS is a layered architecture of 300 front-end processors attached to nearly 60,000 control points and coordinated by supervisor subsystems in the main control room. The functional subsystems beam control including automatic beam alignment and wavefront correction, laser pulse generation and pre-amplification, diagnostics, pulse power, and timing-implement automated shot control, archive data, and support the actions of fourteen operators at graphic consoles. Object-oriented software development uses a mixed language environment of Ada (for functional controls) and Java (for user interface and database backend). The ICCS distributed software framework uses CORBA to communicate between languages and processors. ICCS software is approximately 3/4 complete with over 750 thousand source lines of code having undergone off-line verification tests and deployed to the facility. NIF has entered the first phases of its laser commissioning program. NIF has now demonstrated the highest energy 1/spl omega/, 2/spl omega/, and 3/spl omega/ beamlines in the world. NIF's target experimental systems are also being installed in preparation for experiments to begin in late 2003. This talk will provide a detailed look at the status of the control system.