The influence of size, particle concentration and applied dose (finite vs. infinite dose) on the dermal penetration efficacy of curcumin was investigated in this study. For this, curcumin suspensions with different particle sizes (approx. 20 µm and approx. 250 nm) were produced in different concentrations (0.625–5% (w/w)). The dermal penetration efficacy was determined semi-quantitatively on the ex vivo porcine ear model. The results demonstrated that the presence of particles increases the dermal penetration efficacy of the active compounds being dissolved in the water phase of the formulation. The reason for this is the formation of an aqueous meniscus that develops between particles and skin due to the partial evaporation of water from the vehicle after topical application. The aqueous meniscus contains dissolved active ingredients, and therefore creates a small local spot with a locally high concentration gradient that leads to improved dermal penetration. The increase in penetration efficacy depends on the number of particles in the vehicle, i.e., higher numbers of particles and longer contact times lead to higher penetration efficacy. Therefore, nanocrystals with a high particle concentration were found to be the most suitable formulation principle for efficient and deep dermal penetration of poorly water-soluble active ingredients.

Dermal penetration is considered to mainly occur via passive diffusion. Therefore, a high concentration gradient of dissolved active ingredient between formulation and skin is needed to achieve an effective dermal penetration. The concentration gradient between formulation and skin can be changed by changing the amount of dissolved active ingredient in the formulation. In case of poorly soluble active ingredients this can be achieved by using nanosized drug material instead of larger sized material. The smaller size and the resulting larger surface increase the kinetic solubility and thus increase the concentration gradient of dissolved active ingredient between formulation and skin, which then results in an increased dermal penetration. In this study we demonstrated that the concentration gradient between formulation and skin can also be influenced by the number of particles being present in the formulation and by the dose (volume of formulation) applied to the skin. Particles of undissolved active ingredient are known to act as a reservoir by releasing dissolved molecules in the liquid phase of the formulation. It could now be demonstrated that the particles - once the liquid in which they are dispersed evaporates - can connect to the skin via an aqueous meniscus. The aqueous meniscus contains dissolved active ingredient and therefore creates a small local spot with a locally high concentration gradient and improved dermal penetration. Therefore, the dermal penetration can be increased with formulations that contain high amounts of particles. This can be achieved by applying formulations with high numbers of particles and/or by applying larger volumes of particle containing formulations to the skin.

(1) Background: The ex vivo porcine ear model is often used for the determination of the dermal penetration efficacy of chemical compounds. This study investigated the influence of the post-slaughter storage time of porcine ears on the dermal penetration efficacy of chemical compounds. (2) Methods: Six different formulations (curcumin and different fluorescent dyes in different vehicles and/or nanocarriers) were tested on ears that were (i) freshly obtained, (ii) stored for 24 or 48 h at 4 °C after slaughter before use and (iii) freshly frozen and defrosted 12 h before use. (3) Results: Results showed that porcine ears undergo post-mortem changes. The changes can be linked to rigor mortis and all other well-described phenomena that occur with carcasses after slaughter. The post-mortem changes modify the skin properties of the ears and affect the penetration efficacy. The onset of rigor mortis causes a decrease in the water-holding capacity of the ears, which leads to reduced penetration of chemical compounds. The water-holding capacity increases once the rigor is released and results in an increased penetration efficacy for chemical compounds. Despite different absolute penetration values, no differences in the ranking of penetration efficacies between the different formulations were observed between the differently aged ears. (4) Conclusions: All different types of ears can be regarded to be suitable for dermal penetration testing of chemical compounds. The transepidermal water loss (TEWL) and/or skin hydration of the ears were not correlated with the ex vivo penetration efficacy because both an impaired skin barrier and rigor mortis cause elevated skin hydration and TEWL values but an opposite penetration efficacy. Other additional values (for example, pH and/or autofluorescence of the skin) should, therefore, be used to select suitable and non-suitable skin areas for ex vivo penetration testing. Finally, data from this study confirmed that smartFilms and nanostructured lipid carriers (NLC) represent superior formulation strategies for efficient dermal and transdermal delivery of curcumin.

Mitochondrial dysfunction represents a hallmark of both brain aging and age-related neurodegenerative disorders including Alzheimer disease (AD). AD-related mitochondrial dysfunction is characterized by an impaired electron transport chain (ETC), subsequent decreased adenosine triphoshpate (ATP) levels, and elevated generation of reactive oxygen species (ROS). The bioactive citrus flavanone hesperetin (Hst) is known to modulate inflammatory response, to function as an antioxidant, and to provide neuroprotective properties. The efficacy in improving mitochondrial dysfunction of Hst nanocrystals (HstN) with increased bioavailability has not yet been investigated. Human SH-SY5Y cells harboring neuronal amyloid precursor protein (APP695) acted as a model for the initial phase of AD. MOCK-transfected cells served as controls. The energetic metabolite ATP was determined using a luciferase-catalyzed bioluminescence assay. The activity of mitochondrial respiration chain complexes was assessed by high-resolution respirometry using a Clarke electrode. Expression levels of mitochondrial respiratory chain complex genes were determined using quantitative real-time polymerase chain reaction (qRT-PCR). The levels of amyloid β-protein (Aβ1-40) were measured using homogeneous time-resolved fluorescence (HTRF). ROS levels, peroxidase activity, and cytochrome c activity were determined using a fluorescence assay. Compared to pure Hst dissolved in ethanol (HstP), SH-SY5Y-APP695 cells incubated with HstN resulted in significantly reduced mitochondrial dysfunction: ATP levels and respiratory chain complex activity significantly increased. Gene expression levels of RCC I, IV, and V were significantly upregulated. In comparison, the effects of HstN on SY5Y-MOCK control cells were relatively small. Pure Hst dissolved in ethanol (HstP) had almost no effect on both cell lines. Neither HstN nor HstP led to significant changes in Aβ1-40 levels. HstN and HstP were both shown to lower peroxidase activity significantly. Furthermore, HstN significantly reduced cytochrome c activity, whereas HstP had a significant effect on reducing ROS in SH-SY5Y-APP695 cells. Thus, it seems that the mechanisms involved may not be linked to altered Aβ production. Nanoflavonoids such as HstN have the potential to prevent mitochondria against dysfunction. Compared to its pure form, HstN showed a greater effect in combatting mitochondrial dysfunction. Further studies should evaluate whether HstN protects against age-related mitochondrial dysfunction and thus may contribute to late-onset AD.

Poor aqueous solubility of active compounds is a major issue in today's drug delivery. In this study the smartFilm-technology was exploited to improve the dermal penetration efficacy of a poorly soluble active compound (curcumin). Results were compared to the dermal penetration efficacy of curcumin from curcumin bulk suspensions and nanocrystals, respectively. The smartFilms enabled an effective dermal and transdermal penetration of curcumin, whereas curcumin bulk- and nanosuspensions were less efficient when the curcumin content was similar to the curcumin content in the smartFilms. Interestingly, it was found that increasing numbers of curcumin particles within the suspensions increased the passive dermal penetration of curcumin. The effect is caused by an aqueous meniscus that is created between particle and skin if the dispersion medium evaporates. The connecting liquid meniscus causes a local swelling of the stratum corneum and maintains a high local concentration gradient between drug particles and skin. Thus, leading to a high local passive dermal penetration of curcumin. The findings suggest a new dermal penetration mechanism for active compounds from nano-particulate drug delivery systems, which can be the base for the development of topical drug products with improved penetration efficacy in the future.

Nanocrystals are a universal formulation approach for improved drug delivery of poorly water-soluble drug substances. Besides oral application, also topical application of the nanocrystals is feasible, because the increased kinetic solubility of the nanocrystals results in an increased concentration gradient, thus fostering passive, dermal penetration. Nanocrystals are also promising for targeting drug substances into the hair follicle. After penetration into the hair follicle, the nanocrystals could form a depot from which the active is released into the hair follicle. Thus, leading to a long-lasting and very efficient dermal drug delivery. The efficacy of nanocrystals to penetrate the hair follicles and the influence of the vehicle in which the nanocrystals are suspended was not yet investigated. Therefore, in this study curcumin nanocrystals with a size of about 300 nm were produced and incorporated into gels with different properties. The efficacy to penetrate the hair follicles, as well as the passive, dermal penetration, was assessed on the ex-vivo pig ear model. Nanocrystals were efficiently taken up by the hair follicles and reached the lower part of the infundibulum. This region is optimal for efficient drug delivery because the barrier of the lower infundibulum is not fully developed and thus more permeable, which results in a less hindered passive diffusion of drug substances. The penetration efficacy of the nanocrystals into the hair follicles was not affected by the different types of vehicles, which represented either oleogels or hydrogels that varied in viscosity as well as in the type and the concentration of the gelling agent. All gels possessed a shear-thinning flow behavior and it is hypothesized that all gels fluidized during the skin massage, whereby leading to similarly low viscosities than the aqueous nanosuspension and thus to similar penetration results. The passive, dermal penetration of curcumin was different for the different gels and the main driving parameter leading to good passive diffusion was caused by good skin hydrating properties of the vehicle. The best passive penetration was achieved from hydrogels that contained a humectant. However, the addition of the humectant reduced the efficacy of the nanocrystals to penetrate the hair follicle. Data so far, therefore, suggest that hair follicle targeting with nanocrystals that are suspended in water or simple, shear-thinning gels is highly effective. However, the addition of other excipients, e.g. humectants, to these vehicles might cause changes in the penetration profiles. More research in this regard is needed to understand these observations in more detail.

This chapter reviews the first generation of drug nanocrystals focuses on problems in production and application of these nanocrystals, and describes the features of the new drug nanocrystal generations for overcoming or at least for minimizing these problems. Nanocrystals are a universal formulation strategy for probably all actives that possess poor solubility in aqueous media to increase their bioactivity. Despite improved parenteral and oral application, nanocrystals can also be employed to improve dermal penetration of poorly soluble actives. The first generation of drug nanocrystals was developed in the first half of the 1990s. These nanocrystals, including their production technologies applied have certain limitations, as with the first generation of any product. Drug nanocrystals possess special features, making them interesting for drug delivery. Problems regarding the in vivo performance are mainly associated with intravenously injected nanocrystals. Injecting the superfine drug nanocrystals of the second generation will lead to a very fast dissolution, which can indeed mimic the pharmacokinetics of a solution.