Cells regularly repair numerous mutations. However, the effect of CRISPR/Cas9-induced dsDNA breaks on the repair processes of naturally occurring genome-wide mutations is unclear. In this study, we used TSCE5 cells with the heterozygous thymidine kinase genotype (TK+/-) to examine these effects. We strategically inserted the target sites for guide RNA (gRNA)/Cas9 and I-SceI into the functional allele and designed the experiment such that deletions of > 81 bp or base substitutions within exon five disrupted the TK gene, resulting in a TK-/- genotype. TSCE5 cells in the resting state exhibited 16 genome-wide mutations that affected cellular functions. After gRNA/Cas9 editing, these cells produced 859 mutations, including 67 high-impact variants that severely affected cellular functions under standard culture conditions. Mutation profile analysis indicated a significant accumulation of C to A substitutions, underscoring the widespread induction of characteristic mutations by gRNA/Cas9. In contrast, gRNA/Cas9-edited cells under conditions of S∼G2/M arrest and cyclin-dependent kinase 1 inhibition showed only five mutations. Transcriptomic analysis revealed the downregulation of DNA replication genes and upregulation of alternative DNA repair genes, such as zinc finger protein 384 (ZNF384) and dual specificity phosphatase, under S∼G2/M conditions. Additionally, activation of nucleotide and base excision repair gene, including O-6-methylguanine-DNA methyltransferase and xeroderma pigmentosum complementation group C, was observed. This study highlights the profound impact of CRISPR/Cas9 editing on genome-wide mutation processes and underscores the emergence of novel DNA repair pathways. Finally, our findings provide significant insights into the maintenance of genome integrity during genome editing.

We previously demonstrated that the Alzheimer’s disease (AD)-like model mice, Tg2576, housed at a high ambient temperature of 30 °C for 13 months, exhibited increased body temperature, which increased amyloid-β (Aβ) levels and tau stability, leading to tau phosphorylation and ultimately inducing memory impairment. Here, we aimed to exclude the possible effect of environmental factors associated with the difference in ambient temperature (23 °C vs. 30 °C) and to further clarify the effects of elevated body temperature on AD-like pathologies. We generated uncoupling protein 1 (UCP1) deletion in Tg2576 mice, Tg2576/UCP1−/−, because UCP1 deletion mice show a sustained rise in body temperature at normal room temperature. As expected, the body temperature in Tg2576/UCP1−/− mice was higher than that in Tg2576/ UCP1+/+ mice at 23 °C, which was accompanied by upregulated Aβ levels due to increased β-secretase (BACE1) and decreased neprilysin (NEP) protein levels in the brains of Tg2576/UCP1−/− mice compared with those in the Tg2576/ UCP1+/+ mice. Elevated body temperature also increased total tau levels, leading to enhanced phosphorylation, heat shock protein induction, and activated tau kinases. Furthermore, elevated body temperature enhanced glial activation and decreased synaptic protein levels in the brain. Taken together, these findings demonstrate that elevated body temperatures exacerbate AD-like pathologies.

Allogeneic cell therapies are not fully effective in treating osteoarthritis of the knee (OAK). We recently reported that transplantation of autologous chondrocyte cell-sheets along with open-wedge high tibial osteotomy promoted hyaline cartilage repair in humans. Here we describe our regenerative therapy for OAK using polydactyly-derived allogeneic chondrocyte cell-sheets (PD sheets) and temperature-responsive culture inserts. Ten patients with OAK and cartilage defects categorized arthroscopically as Outerbridge grade III or IV received the therapy. Cartilage viscoelasticity and thickness were assessed before and after transplantation. Arthroscopic biopsies obtained 12 months after transplantation were analyzed histologically. Gene expression was analyzed to evaluate the PD sheets. In this small initial longitudinal series, PD sheet transplantation was effective in treating OAK, as indicated by changes in cartilage properties. Gene marker sets in PD sheets may predict outcomes after therapy and provide markers for the selection of donor cells. This combined surgery may be an ideal regenerative therapy with disease-modifying effects in OAK patients.

The effect of nanoparticle type, shape, as well as primary and secondary particle size on toxicity remains poorly characterized. In this study, suspensions of nickel oxide (NiO) nanoparticles with the same primary particle size (< 50 nm) but different secondary particle sizes were prepared, and their cytotoxicity was investigated. A planetary ball mill wet nanopulverizer with zirconium milling balls of decreasing sizes (φ: 0.5, 0.1, and 0.05 mm) yielded NiO nanoparticles of decreasing mean particle size (310.4 ± 6.7, 172.0 ± 2.8, and 102.0 ± 0.5 nm). Stock solutions were diluted to various concentrations in 10% heat-inactivated fetal bovine serum containing minimum essential medium, and shown to have the same primary particle size, but different secondary particle sizes. Tests with A549 cells revealed that cytotoxicity increased with increasing secondary particle size: milling ball diameter φ 0.05 mm (IC50: 148 μg/mL) < φ 0.1 mm (IC50: 83.5 μg/mL) < φ 0.5 mm (IC50: 33.4 μg/mL). Uptake experiments indicated that the intracellular amount of Ni increased with increasing secondary particle size. In summary, the present findings show that differences in secondary particle size affected the cytotoxicity of NiO suspensions, which could be ascribed at least in part to differences in the amount of NiO taken up by the cells.

Global warming is a serious public health threat to people worldwide. High body temperature is one of the important risk factors for Alzheimer’s disease (AD), and the body temperature of AD patients has been found to be significantly higher than that of elderly control subjects. However, the effects of high body temperature on cognitive function and AD pathologies have not been completely elucidated. We report here that Tg2576 mice housed at a high ambient temperature of 30 °C for 13 months showed an increase in the body temperature, which is accompanied by memory impairment and an enhancement of amyloid-β peptides (Aβ) generation through the upregulation of β-site APP cleaving enzyme 1 (BACE1) level and decrease in the level of an Aβ-degrading enzyme, neprilysin (NEP) in the brain, compared with those of Tg2576 mice at 23 °C. High body temperature also increased the levels of heat shock proteins (HSPs), stress-stimulated kinases such as JNK, and total tau, leading to the enhancement of tau phosphorylation at 30 °C. Taken together, our findings suggest that high body temperature exacerbates cognitive function and AD pathologies, which provides a mechanistic insight for its prevention.

Two zinc oxide nanoparticles (ZnO NPs) with different physicochemical properties (ZnO(α) and ZnO(Σ)) were examined in THP-1 cells to investigate their effects on cellular immunomodulation and cytotoxicity. THP-1 cells were cultured in the presence of ZnO(α) or ZnO(Σ) for 48 hr, and the expression of proinflammatory cytokines and immune cell surface antigens was examined. ZnO(α) and ZnO(Σ) reduced cell viability in a concentration- and time-dependent manner, with the latter being more potent. ZnO(α) and ZnO(Σ) increased the expression of CD54, IL-8, and TNF-α to the same extent between 24 and 48 hr. While ZnO(Σ) was more potent at effective concentrations, this potency was comparable between ZnO(α) and ZnO(Σ) when normalized to their cytotoxic concentrations (LC50, LC25, or LC5). It was considered that there was a potency shift that is associated with cytotoxicity and physicochemical properties, in immunomodulatory activities in THP-1 cells between ZnO NPs.

In biological safety evaluation of medical devices, false-negative results have been observed during skin irritation testing using the reconstructed human epidermis (RhE) model when measuring cell viability as a single marker. Therefore, to improve testing accuracy, this study conducted a comprehensive survey and performance evaluation of cytokines to identify a second marker. In addition to IL-1α, macrophage migration inhibitory factor (MIF) was newly identified as a candidate marker, in the Bio-Plex assay of EpiDerm model exposed to polymer sample extracts. Irritation based on cell viability level was not accurately determined in LabCyte model using silicone spiked with 25% heptanoic acid (HA). By contrast, the irritation potency was accurately assessed in detail by measuring IL-1α or MIF. Further, IL-1α and MIF levels in EpiDerm, LabCyte, and EpiSkin models stimulated with sodium dodecyl sulfate (SDS) were inversely correlated with cell viability, and were detected even at low SDS concentrations without cell toxicity. Additionally, MIF demonstrated greater S/N ratio and dose-dependency at high SDS concentrations in some models compared to IL-1α. These results indicated that MIF might be a useful second marker for improving the sensitivity and accuracy of skin irritation testing with RhE models.

Qualitative real-time PCR method for three poisonous Entoloma rhodopolium-related species in Japan was established using specific primers and FAM, VIC, Texas Red, Cy5-labeled probes. The use of multicolor probes can extend the method to simultaneous detection of different targets. Standard plasmids were constructed as reference materials. Designed primers and probes in the method detect only a target species, and the detection limit was 12.5 copies or below. This indicates it is highly specific and sensitive enough to detect the poisonous mushrooms in food residues. Next, we applied the method to four food residue samples obtained from food poisoning cases. The real-time PCR method did identify all of four samples as E. subrhodopolium and E. pseudorhodopolium, whereas PCR-RFLP did not. The method established here revealed Entoloma rhodopolium-related species in Hokkaido were different species such as E. eminens and unknown species.

Tubes are indispensable in our daily life, mechanical engineering and biomedical fields. However, the practical applications of tubes are sometimes limited by their poor wettability. Reported herein is hydrophilization of the tube inner wall by transferred atmospheric pressure plasma (TAPP). An Ar atmospheric pressure plasma jet (APPJ) is used to induce He TAPP inside polytetrafluoroethylene (PTFE) tube to perform inner wall surface modification. Optical emission spectrum (OES) is used to investigate the distribution of active species, which are known as enablers for surface modification, along the TAPP. Tubes' surface properties demonstrate that after TAPP treatment, the wettability of the tube inner wall is well improved due to the decrease of surface roughness, the removal of surface fluorine and introduction of oxygen. Notably, a deep surface modification can significantly retard the aging of the obtained hydrophilicity. The results presented here clearly demonstrate the great potential of TAPP for surface modification of the inner wall of tube or other hollow bodies, and thus a uniform, effective and long-lasting surface modification of tube with any length can be easily realized by moving the tube along its axis.

Objectives: This study evaluates pigment component distribution and depth in decorative soft contact lenses (DSCLs) using a variety of analytical methods. Methods: We sampled 18 DSCLs using optical microscopy, optical coherence tomography analysis, Z-stack analysis, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDX), and time-of-flight secondary ion mass spectrometry (TOF-SIMS) to evaluate the distribution and depth of pigment components. Results: Pigment distribution in DSCLs was easily observed with optical methods including Z-stack analysis. X-ray photoelectron spectroscopy, SEM/EDX, and TOF-SIMS were used to evaluate the level of pigment exposure on the lens surface and the results showed significant differences between the methods. Pigment components were detected in 16 samples by SEM/EDX, but not by XPS. Pigment components were only detected in eight samples using TOF-SIMS. Conclusions: It may be necessary to show that a nanometer-thick monomolecular film does not exist on the surface of DSCLs, to demonstrate the exposure of a pigment particle. Taking into account the principle behind each of the measurement methods and the resolution and sensitivity of each of the analytical methods compared, TOF-SIMS may be the most appropriate method to accurately judge pigment exposure on DSCLs. The Z-stack method may be useful for estimating the depth of pigment components in DSCLs.

Assessment of skin irritation is an essential component of the safety evaluation of medical devices. OECD Test Guideline 439 describes the use of reconstructed human epidermis (RhE) as an in vitro test system for classification of skin irritation by neat chemicals. An international round robin study was conducted to evaluate the RISE method for determination of skin irritant potential of medical device extracts. Four irritant polymers and three non-irritant controls were obtained or developed that had demonstrated their suitability to act as positive or negative test samples. The RhE tissues (EpiDerm (TM) and SkinEthic (TM) RHE) were dosed with 100 mu L. aliquots of either saline or sesame oil extract. Incubation times were 18 h (EpiDerm (TM)) and 24 h (SkinEthic (TM) RHE). Cell viability reduction > 50% was indicative of skin irritation. Both the EpiDerm (TM) and SkinEthic (TM) RITE tissues were able to correctly identify virtually all of the irritant polymer samples either in the saline, sesame oil or both solvent extracts. Our results indicate that RhE tissue models can detect the presence of strong skin irritants at low levels in dilute medical device polymer extracts. Therefore, these models may be suitable replacements for the rabbit skin irritation test to support the biological evaluation of medical devices.

Fukuyama congenital muscular dystrophy (FCMD), which is caused by mutations in the fukutin gene, is the second most common form of childhood muscular dystrophy in Japan. The founder haplotype is the most prevalent in the chromosomes of Japanese FCMD patients, and corresponds to an SVA retrotransposal insertion in the 3′-untranslated region of fukutin. Although other mutations have been reported, the mutation corresponding to the second most prevalent haplotype in Japanese FCMD patients remained unknown. Recently a deep-intronic point mutation c.647+2084G>T was identified in Korean patients with congenital muscular dystrophy. Here, we performed mutational analysis of 10 patients with the second most prevalent haplotype and found that all of them were compound-heterozygous for the SVA insertion and this c.647+2084G>T mutation. The fukutin mRNA of these patients contained a pseudoexon between exon 5 and exon 6, which was consistent with the previous Korean study. As expected, the mutated fukutin protein was smaller than the normal protein, reflecting the truncation of fukutin due to a premature stop codon. Immunostaining analysis showed a decrease in the signal for the glycosylated form of α-dystroglycan. These findings indicated that this mutation is the second most prevalent loss-of-function mutation in Japanese FCMD patients.

We have developed in vitro test methodologies modeling in vivo practical-use situations, to quantitatively assess safety and effectiveness of innovative medical devices. We believe that expediting development of these in vitro methodology not only reinforce preclinical evaluation and enhance timely access to innovative medical devices for patients but also reduce potential risk when used in real-world clinical practice, because controlled clinical trials have certain limitation in fully demonstrating benefit and risk. With the grant from Ministry of Health, Labour and Welfare intended for "Promotional Project for Practical Application of Innovative Pharmaceutical, Medical Device, and Tissue Engineering Products", we have developed drafts on in vitro test guideline for "Durability testing methods for coronary artery stent", "Durability testing methods for vascular stent intended for Superficial femoral - Popliteal artery", and "Method for in vitro thrombogenicity testing for inflow cannula of left ventricular assist system". Further 5 guideline drafts are under preparation. Here, we introduce impacts of in vitro test methods modeling in vivo intended-use situations on expediting availability of new medical devices and timely assessment and management of risk.

ATP-binding cassette G1 (ABCG1) and ABCG4, expressed in neurons and glia in the central nervous system, mediate cholesterol efflux to lipid acceptors. The relationship between cholesterol level in the central nervous system and Alzheimer’s disease has been reported. In this study, we examined the effects of ABCG1 and ABCG4 on amyloid precursor protein (APP) processing, the product of which, amyloid β (Aβ), is involved in the pathogenesis of Alzheimer’s disease. Expression of ABCG1 or ABCG4 in human embryonic kidney 293 cells that stably expressed Swedish-type mutant APP increased cellular and cell surface APP levels. Products of cleavage from APP by α-secretase and by β-secretase also increased. The levels of secreted Aβ, however, decreased in the presence of ABCG1 and ABCG4, but not ABCG4-KM, a nonfunctional Walker-A lysine mutant. In contrast, secreted Aβ levels increased in differentiated SH-SY5Y neuron-like cells in which ABCG1 and ABCG4 were suppressed. Furthermore, Aβ42 peptide in the cerebrospinal fluid from Abcg1 null mice significantly increased compared to the wild type mice. To examine the underlying mechanism, we analyzed the activity and distribution of γ-secretase. ABCG1 and ABCG4 suppressed γ-secretase activity and disturbed γ-secretase localization in the raft domains where γ-secretase functions. These results suggest that ABCG1 and ABCG4 alter the distribution of γ-secretase on the plasma membrane, leading to the decreased γ-secretase activity and suppressed Aβ secretion. ABCG1 and ABCG4 may inhibit the development of Alzheimer’s disease and can be targets for the treatment of Alzheimer’s disease.

To investigate relationships between particle (as a model of aggregates) size in a nanomaterial test suspension and its cytotoxicity, a series of eleven sizes of polystyrene (PS) particles were tested in the cytotoxicity test and the chromosome aberration test by using a Chinese hamster cell line CHL. The PS particles were spheres with defined diameters ranging from 0.1 to 9.2 µm. A series of eight sizes of particles with diameters ranging from 0.92 to 4.45 µm showed stronger cytotoxicity than the others. There was a marked difference in cytotoxicity between the 4.45- and 5.26-µm particles. The 0.92- to 4.45-µm particles did not induce structural chromosome aberrations but induced a high frequency of polyploidy in the chromosome aberration test. The 5.26-µm particles showed very weak induction of polyploidy. The incorporation of the 4.45-µm particles into CHL cells was observed by scanning electron microscopy (SEM). Some cells incorporated more than 10 particles. The semi-quantitative measurement of incorporation of particles into cells was performed by flow cytometry with a parameter of side scattered light (SSC) intensity. It showed that CHL cells preferably incorporated the 4.45-µm particles to the 5.26-µm particles. These findings suggest that CHL cells may have a kind of size-recognition ability and incorporate a particular size of particles. The particles may prevent a normal cytokinesis resulting in polyploidy induction. Nanomaterials also may show size-dependent toxicity. Data on particle (or aggregate) size distribution in the test suspension should be provided to evaluate properly the results of toxicity tests of nanomaterials.