The dynamic quenching of luminescence derived from Ru(dpp3)2+-doped ORMOSIL nanoparticles is used for monitoring of the intracellular oxygen concentration.

Electroactive biofilms are capable of extracellular electron transfer to insoluble metal oxides and electrodes; such biofilms are relevant to biogeochemistry, bioremediation, and bioelectricity production. We investigated the extracellular electron transfer mechanisms in Shewanella loihica PV-4 viable biofilms grown at indium tin oxide (ITO) and graphite electrodes in potentiostat-controlled electrochemical cells poised at 0.2 V vs. Ag/AgCl. Chronoamperometry and confocal microscopy showed higher biofilm growth at graphite compared to the ITO electrode. Cyclic voltammetry, differential pulse voltammetry, along with fluorescence spectroscopy showed that direct electron transfer through outer membrane c type cytochromes (Omcs) prevailed at the biofilm/ITO interface, while biofilms formed at graphite electrode reduced the electrode also via secreted redox mediators, such as flavins and quinones. The biofilm age does not affect the prevalent transfer mechanism at ITO electrodes. On the other hand, secreted redox mediators accumulated at biofilm/graphite interface, thus increasing mediated electron transfer as the biofilm grows over five days. Our results showed that the electrode material determined the prevalent electron transfer mechanism and the dynamic of secreted redox mediators in S. loihica PV-4 biofilms. These observations have implications for the optimization of biofilm-based electrochemical systems, such as biosensors and microbial fuel cells.

In this work, gold-silica plasmonic nanohybrids have been synthesized as model systems which enable tuning of dye fluorescence enhancement/quenching interactions. For each system, a dye-doped silica core is surrounded by a 15 nm spacer region, which in turn is surrounded by gold nanoparticles (GNPs). The GNPs are either covalently conjugated via mercapto silanization to the spacer or encapsulated in a separate external silica shell. The intermediate spacer region can be either dye doped or left undoped to enable quenching and plasmonic enhancement effects respectively. The study indicates that there is a larger enhancement effect when GNPs are encapsulated in the outer shell compared to the system of external conjugation. This is due to the environmental shielding provided by shell encapsulation compared to the exposure of the GNPs to the solvent environment for the externally conjugated system. The fluorescence signal enhancement of the nanohybrid systems was evaluated using a standard HRP-anti-HRP fluorescence based assay platform.

A highly bright and photostable, fluorescent nanohybrid particle is presented which consists of gold nanoparticles (GNPs) embedded in dye-doped silica in a core-shell configuration. The dye used is the near-infrared emitting 4,5-benzo-5'-(iodoacetaminomethyl)-1',3,3,3',3'-pentamethyl-1-(4-sulfobutyl) indodicarbo cyanine. The nanohybrid architecture comprises a GNP core which is separated from a layer of dye molecules by a 15 nm buffer layer and has an outer protective, undoped silica shell. Using this architecture, a brightness factor of 550 has been achieved compared to the free dye. This hybrid system, referred to as Noble metal Enhanced Optical Nanohybrid (NEON) in this paper, is the first nanohybrid construct to our knowledge which demonstrates such tunable fluorescence property. NEON has enhanced photostability compared to the free dye and compared to a control particle without GNPs. Furthermore, the NEON particle, when used as a fluorescent label in a model bioassay, shows improved performance over assays using a conventional single dye molecule label.

Electron transfer mechanisms in Shewanella loihica PV-4 viable biofilms formed at graphite electrodes were investigated in potentiostat-controlled electrochemical cells poised at oxidative potentials (0.2V vs. Ag/AgCl). Chronoamperometry (CA) showed a repeatable biofilm growth of S. loihica PV-4 on graphite electrode. CA, cyclic voltammetry (CV) and its first derivative shows that both direct electron transfer (DET) mediated electron transfer (MET) mechanism contributes to the overall anodic (oxidation) current. The maximum anodic current density recorded on graphite was 90μAcm−2. Fluorescence emission spectra shows increased concentration of quinone derivatives and riboflavin in the cell-free supernatant as the biofilm grows. Differential pulse voltammetry (DPV) show accumulation of riboflavin at the graphite interface, with the increase in incubation period. This is the first study to observe a gradual shift from DET to MET mechanism in viable S. loihica PV-4 biofilms.

Fluorescence lifetime correlation spectroscopy (FLCS) is presented as a single-step label-free detection method for probing the amine silanization-driven spontaneous 3D self-assembly of freestanding gold nanoparticles (GNPs) in solution. Unlike the conventional methods of studying self-assembly, for example, UV-vis spectroscopy and electron microscopy, FLCS utilizes the intrinsic gold fluorescence. The significance of this approach is to amalgamate the measurement of optical and hydrodynamic size properties simultaneously to achieve a more coherent description of the self-assembly pathway. GNP self-assembly has two-stage kinetics. Electrostatic interaction drives the initial amine silanization, and this is followed by siloxane bond formation between hydrolyzed ethoxy groups of GNP-attached APTES, resulting in the formation of micrometer-sized superstructures. The self-assembly has resulted in a 5-fold increase in the fluorescence lifetime (FL), and the FLCS study has shown an 8- to 10-fold increase in the diffusion coefficient using the pure diffusion model. This result is consistent with the transmission electron microscopy (TEM) observation, which shows a few hundred fold increase in the diameter due to assembly formation by the GNPs.

This article describes the synthesis and characterisation of fluorescent composite nanoparticles consisting of a silica core and a dextran shell. The silica core contains a rhodamine-based reference dye, which allows ratiometric measurements and the dextran shell is labelled with the Ca2+-sensitive dye Fluo-4. The nanoparticles have an average hydrodynamic diameter of 95 nm, good colloidal stability and show a 2.9-fold increase in fluorescence intensity upon binding to Ca2+ ions. The apparent dissociation constant of K'(d) approximate to 520 nM is well suited for measurements in the physiological range.

Fluorescence lifetime (FL) analysis and fluorescence correlation spectroscopy (FCS) have been successfully employed to reveal detailed information about the internal architecture of fluorescent silica nanoparticles (NPs). The dual-component lifetime behavior shows a two-domain dye distribution in the NP as a function of solvent accessibility. The introduction of an undoped silica shell serves to stabilize the outer dye fraction that is manifest as an increase in lifetime. The FCS not only shows a size-dependent increase in the cross-correlation decay constant but also demonstrates a significant relaxation in the FCS signal with the introduction of an undoped silica shell.

This Article addresses the important issue of the characterization of surface functional groups for optical bioassay applications. We use a model system consisting of spherical dye-doped silica nanoparticles (NPs) that have been functionalized with amine groups whereby the encapsulated cyanine-based near-infrared dye fluorescence acts as a probe of the NP surface environment. This facilitates the identification of the optimum deposition parameters for the formation of a stable ordered amine monolayer and also elucidates the functionalization profile of the amine-silanization process. Specifically, we use a novel approach where the techniques of fluorescence correlation spectroscopy (FCS) and fluorescence lifetime measurement (FL) are used in conjunction with the more conventional analytical techniques of zeta potential measurement and Fourier transfer infrared spectroscopy (FTIR). The dynamics of the ordering of the amine layer in different stages of the reaction have been characterized by FTIR, FL, and FCS. The results indicate an optimum reaction time for the formation of a stable amine layer, which is optimized for further biomolecular conjugation, whereas extended reaction times lead to a disordered cross-linked layer. The results have been validated using an immunoglobulin (IgG) plate-based direct binding assay where the maximum number of IgG-conjugated aminated NPs were captured by immobilized anti-IgG antibodies for the NP sample corresponding to the optimized amine-silanization condition. Importantly, these results point to the potential of FCS and FL as useful analytical tools in diverse fields such as characterization of surface functionalization.

(2013). Extracellular electron transfer mechanism in Shewanella loihica PV-4 biofilms formed at indium tin oxide and graphite electrodes. Copyright and Moral Rights for the articles on this site are retained by the individual authors and/or other copyright owners. For more information on Open Research Online's data policy on reuse of materials please consult the policies page. Electroactive biofilms are capable of extracellular electron transfer to insoluble metal oxides and electrodes; such biofilms are relevant to biogeochemistry, bioremediation, and bioelectricity production. We investigated the extracellular electron transfer mechanisms in Shewanella loihica PV-4 viable biofilms grown at indium tin oxide (ITO) and graphite electrodes in potentiostat-controlled electrochemical cells poised at 0.2 V vs. Ag/AgCl. Chronoamperometry and confocal microscopy showed higher biofilm growth at graphite compared to the ITO electrode. Cyclic voltammetry, differential pulse voltammetry, along with fluorescence spectroscopy showed that direct electron transfer through outer membrane c type cytochromes (Omcs) prevailed at the biofilm/ITO interface, while biofilms formed at graphite electrode reduced the electrode also via secreted redox mediators, such as flavins and quinones. The biofilm age does not affect the prevalent transfer mechanism at ITO electrodes. On the other hand, secreted redox mediators accumulated at biofilm/graphite interface, thus increasing mediated electron transfer as the biofilm grows over five days. Our results showed that the electrode material determined the prevalent electron transfer mechanism and the dynamic of secreted redox mediators in S. loihica PV-4 biofilms. These observations have implications for the optimization of biofilm-based electrochemical systems, such as biosensors and microbial fuel cells.