Background This study aimed to clarify the characteristic features of the anteroinferior and posterosuperior popliteomeniscal fascicles (aiPMF and psPMF, respectively) and popliteal hiatus using three-dimensional (3D) reconstructions of 7 T magnetic resonance imaging (MRI) arthrography. Methods Six knees from human cadavers fixed using the Thiel embalming method were examined using 7 T MRI arthrography. 3D Images of the structures around the popliteal hiatus were reconstructed. Morphologies of the psPMF, aiPMF, and popliteal hiatus were investigated and their positional relationships analyzed. Results The PMFs attached to the periphery of the lateral meniscus (LM) to form the popliteal hiatus. Each coursed in an oblique direction. The mean length of the psPMF and aiPMF attachments to the LM were 6.8 and 21.6 mm, respectively; mean popliteal hiatus length was 12.8 mm. These lengths corresponded to 7.5%, 24.3%, and 14.5% of the total length of the LM, respectively. The aiPMF was thick near the lateral aspect of the articular capsule and became thinner towards the posteromedial aspect of the LM. The psPMF was thick near the posterior aspect of the articular capsule and became thinner towards the posterolateral aspect of the LM. Conclusion Morphological properties of the aiPMF, psPMF, their attachments to the LM, and the popliteal hiatus were consistent across the cadaver specimens examined. Each PMF was thin near the popliteal hiatus and became thicker towards its attachment to the articular capsule. These findings may be useful for anatomical repair for the LM hypermobility.

Aim: This study was conducted to clarify the morphological properties of the quadriceps tendon (QT) and its patella insertion site using three-dimensional computed tomography and magnetic resonance imaging. Methods: Twenty-one right knees from human cadavers were evaluated using threedimensional computed tomography and magnetic resonance imaging. The morphologies of the QT and its patella insertion site were evaluated, along with intra-tendon differences in length, width, and thickness. Results: The QT insertion site on the patella was dome-shaped without characteristic bony features. The mean surface area of the insertion site was 502.5 & PLUSMN; 68.5 mm2 (range, 336.0- 610.7). The QT was longest 2.0 mm lateral to the central width of the insertion and gradually became shorter toward both edges (mean length, 59.7 & PLUSMN; 8.3 mm). The QT was widest at the insertion site (mean width, 39.1 & PLUSMN; 5.3 mm) and gradually became narrower toward the proximal side. The QT was thickest 2.0 mm medial to the center (mean thickness, 11.4 & PLUSMN; 1.9 mm). Conclusion: The morphological properties of the QT and its insertion site were consistent. The characteristics of the QT graft depend on the harvested region. & COPY; 2023 Elsevier B.V. All rights reserved.

Background: The aim of our study was to clarify the morphology of the proximal tibiofibu-lar joint (PTFJ), insertion sites of the proximal tibiofibular ligaments (PTFLs), and related osseous landmarks on three-dimensional (3D) computed tomography (CT) images. Methods: Cadaveric knees were evaluated by dissection and 3D CT imaging. The anterior PTFL (A-PTFL) and posterior PTFL (P-PTFL) were isolated, and their tibial and fibular inser-tion sites were identified. The morphology and location of insertion sites and their posi-tional relationships with osseous structures were analyzed on 3D CT images.Results: The A-PTFL comprised up to four bundles, and the P-PTFL comprised two bundles. The mean length of the A-PTFL and P-PTFL was 11.3 mm and 10.3 mm, respectively. On the tibial side of the PTFJ, bony prominences were present at the A-PTFL and P-PTFL insertion sites and were clearly identified as osseous landmarks in all knees. On the fibular side, the A-PTFL and P-PTFL insertion sites were at the edge of the triangular pyramid of the fibular head. The mean PTFJ area was 198.8 mm2, and the mean inclination angle between PTFJ and tibial plane was 38.4 degrees. There was an inverse correlation between the PTFJ surface area and the inclination angle. Conclusion: The present study clearly identified PTFL insertion sites on the tibia and fibula and showed the relationships between these insertions and osseous landmarks. These data improve our understanding of the anatomy of PTFL insertions, which may assist surgeons in performing anatomical reconstruction.(c) 2023 Published by Elsevier B.V.

Abstract Purpose The purpose of this study was to clarify the insertion sites of the anterior inferior tibiofibular ligament (AITFL) and posterior inferior tibiofibular ligament (PITFL) and related osseous landmarks on three-dimensional computed tomography images. Methods Twenty-nine non-paired, formalin-fixed human cadaveric ankles were evaluated. The tibial and fibular insertion sites of the AITFL and PITFL were identified. The morphology and location of the insertion sites and their positional relationships with osseous structures were analyzed on three-dimensional computed tomography images. Results The AITFL had a trapezoidal shape, with fibers that ran obliquely lateral from a wider insertion at the lateral distal tibia to the medial distal fibula. The PITFL had a similar shape to the AITFL; however, it ran more horizontally, with fibers running in the same direction. In the tibia, the anterior capsular ridge and the Chaput’s and Volkmann’s tubercles were useful osseous landmarks for the insertion sites. In the fibula, the centers of the insertion sites of the AITFL and PITFL were located on the edges of the distal anterior and posterior fibula, which were useful osseous landmarks. The mean distances between the center points of the tibial and fibular insertion sites of the AITFL and PITFL were 10.1 ± 2.4 mm and 11.7 ± 2.6 mm, respectively. Conclusions The relationships between the characteristic features of the distal tibia and fibula and the insertions of the AITFL and PITFL were consistent. The present findings improve the understanding of the anatomy of the insertions of the distal tibiofibular syndesmotic joint.

PURPOSE:To clarify the characteristic features of the meniscal root attachments, meniscofemoral ligaments (MFLs), and related osseous landmarks on three-dimensional images using computed tomography.METHODS:Twenty-eight non-paired, formalin-fixed human cadaveric knees were evaluated in this study. The meniscal root attachments were identified and marked. Three-dimensional images were obtained after applying a contrast agent to the entire meniscal surfaces and MFLs, then the morphology of the meniscal root attachments and MFLs, and their positional relationships with osseous landmarks, were analyzed.RESULTS:Parsons' knob divided the medial meniscal anterior root attachment and lateral meniscal anterior root attachment on the anterior portion of the tibial plateau. The medial meniscal posterior root attachment was near the medial intercondylar tubercle. The lateral meniscal posterior root attachment (LMPRA) was closer to the lateral intercondylar tubercle. Both root attachments were near the posterior intercondylar fossa. The positional relationships between the meniscal root attachments and related osseous landmarks were consistent in all specimens. The MFLs originated from the lateral meniscus posterior horn, and the anterior MFL was closer to the LMPRA than the posterior MFL. The posterior MFL originated at approximately the midpoint between the LMPRA and the most posterior margin of the lateral meniscus.CONCLUSION:This study showed that the relationships between the characteristic features of the meniscal root attachments, MFLs, and related osseous landmarks were consistent. The clinical relevance of this study is that it improved understanding of the anatomy of the meniscal root attachments and MFLs.

Superficial ulnar artery (SUA) is defined as arterial variation of an ulnar artery of high origin that lies superficially in the forearm. Because an SUA may be mistaken for a superficial vein, there is a risk of arterial damage. During routine dissection of the cadaver, we incidentally detected a case of unilateral SUA in the left arm. SUA arose from the axillary artery and descended superficial to the axillary artery and median nerve. At the wrist, the SUA crossed over palmaris longus (PL) tendon from the radial side to the ulnar side. In this cadaver, the PL tendon was located on the ulnar side and was thicker than the flexor carpi radialis tendon. Clinicians should check for the presence of SUA before any technical procedure, because lack of awareness of its presence can have serious consequences.

Introduction: The occurrence of non-traumatic vertebral compression fractures (VCFs) in a healthy young male is very rare. We present a rare case of non-traumatic thoracic VCFs in a young epileptic patient. Case Report: A 19-year-old healthy male experienced severe back pain. There had been no significant traumatic event. A radiograph of the spine showed collapsed vertebra at Th6 and Th7 and magnetic resonance image of the spine showed intensity changes at Th6, Th7 and Th8. Bone mineral density (BMD) at the radius was low and urine N-terminal telopeptide (NTx) was very high. The patient was diagnosed with VCFs caused by low BMD. The patient had a medical history of epilepsy and had taken valproate for thirteen years. We instructed the patient to stop taking valproate and to begin taking bisphosphonate. As a result, urine NTx became normal. Conclusion: It was previously reported that valproate reduced BMD in epileptic children and reduction in BMD increased with the duration of valproate therapy. We propose that regular BMD screening and measurement of bone metabolic markers should be conducted for all patients taking long-term antiepileptic drugs to prevent BMD loss and associated fractures.