Recently, cellular mechanical properties have received increasing attention as a potential biophysical marker for cancer cells. The analysis of mechanical profiles at the single-cell level may provide information that is potentially useful to assess tumor prognosis and response to therapy. This feature review discusses a novel nanocytology approach that combines traditional morphology assessment, molecular analysis and nanomechanical analysis of cancer cells.

Green tea extract (GTE) is known to be a potential anticancer agent (Yang et al 2009 Nat. Rev. Cancer 9 429–39) with various biological activities (Lu et al 2005 Clin. Cancer Res. 11 1675–83; Yang et al 1998 Carcinogenesis 19 611–6) yet the precise mechanism of action is still unclear. The biomechanical response of GTE treated cells taken directly from patient's body samples was measured using atomic force microscopy (AFM) (Binnig et al 1986 Phys. Rev. Lett. 56 930). We found significant increase in stiffness of GTE treated metastatic tumor cells, with a resulting value similar to untreated normal mesothelial cells, whereas mesothelial cell stiffness after GTE treatment is unchanged. Immunofluorescence analysis showed an increase in cytoskeletal-F-actin in GTE treated tumor cells, suggesting GTE treated tumor cells display mechanical, structural and morphological features similar to normal cells, which appears to be mediated by annexin-I expression, as determined by siRNA analysis of an in vitro cell line model. Our data indicates that GTE selectively targets human metastatic cancer cells but not normal mesothelial cells, a finding that is significantly advantageous compared to conventional chemotherapy agents.

About 80% of US adults have some form of dental disease. There are a variety of new dental products available, ranging from implants to oral hygiene products that rely on nanoscale properties. Here, the application of AFM (Atomic Force Microscopy) and optical interferometry to a range of dentistry issues, including characterization of dental enamel, oral bacteria, biofilms and the role of surface proteins in biochemical and nanomechanical properties of bacterial adhesins, is reviewed. We also include studies of new products blocking dentine tubules to alleviate hypersensitivity; antimicrobial effects of mouthwash and characterizing nanoparticle coated dental implants. An outlook on future "nanodentistry" developments such as saliva exosomes based diagnostics, designing biocompatible, antimicrobial dental implants and personalized dental healthcare is presented.

Objectives. Streptococcus mutans is considered a major causative of tooth decay due to its ability to rapidly metabolize carbohydrates such as sucrose. One prominent excreted end product of sucrose metabolism is lactic acid. Lactic acid causes a decrease in the pH of the oral environment with subsequent demineralization of the tooth enamel. Biologically relevant bacteria-induced enamel demineralization was studied.Methods. Optical profiling was used to measure tooth enamel decay with vertical resolution under one nanometer and lateral features with optical resolution as a result of S. mutans biofilm exposure. Comparison measurements were made using AFM.Results. After 72h of biofilm exposure the enamel displayed an 8-fold increase in the observed roughness average (R-a), as calculated over the entire measured array. Similarly, the average root mean square (RMS) roughness, R-RMS, of the enamel before and after biofilm exposure for 3 days displayed a 7-fold increase. Further, the direct effect of chemically induced enamel demineralization using biologically relevant organic acids was shown. Optical profiles of the enamel surface after addition of a 30% lactic acid solution showed a significant alteration in the surface topography with a corresponding increase in respective surface roughness statistics. Similar measurements with 10% citric acid over seconds and minutes give insight into the demineralization process by providing quantitative measures for erosion rates: comparing surface height and roughness as metrics.Significance. The strengths of optical profilometry as an analytical tool for understanding and analyzing biologically relevant processes such as biofilm induced tooth enamel demineralization were demonstrated. (C) 2009 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

showed that cancer cells from patients are about 70% less stiff than normal cells. Seven different clinical samples, each consisting of eight normal and eight malignant cells, were measured and from the reported results, one can deduce that three or four force curves were recorded at the same position for each single cell. Cross

Recently biomechanics of cancer cells, in particular stiffness or elasticity, has been identified as an important factor relating to cancer cell function, adherence, motility, transformation and invasion. We report on the nanomechanical responses of metastatic cancer cells and benign mesothelial cells taken from human body cavity fluids using atomic force microscopy. Following our initial study (Cross et al 2007 Nat. Nanotechnol. 2 780–3), we report on the biophysical properties of patient-derived effusion cells and address the influence of cell morphology on measured cell stiffness. Using a cytocentrifugation method, which yields morphologically indistinguishable cells that can be prepared in 1 min and avoids any possible artifacts due to 12 h ex vivo culture, we find that metastatic tumor cells are more than 80% softer than benign cells with a distribution over six times narrower than that of normal cells. Consistent with our previous study, which yielded distinguishable cell populations based on ex vivo growth and morphological characteristics, our results show it is unlikely that morphology alone is sufficient to explain the difference in elastic moduli for these two cell types. Moreover, analysis of non-specific cell adhesion inherent to tumor and normal cells collected from patients show surface adhesion of tumor cells is ∼33% less adhesive compared to that of normal cells. Our findings indicate that biomechanical-based functional analysis may provide an additional platform for cytological evaluation and diagnosis of cancer in the future.

This study used atomic force microscopy (AFM) to probe the local cell-surface interactions associated with the glucan polymers of Streptococcus mutans, the macromolecules most commonly attributed to the virulence of this microbe. In situ force spectroscopy was used to quantitatively probe and correlate cell-surface adhesion and dynamics with S. mutans UA140 wild-type and five glucosyltransferase mutants. Adhesion between the tooth surface and S. mutans is largely mediated by glucan production from sucrose via three glucosyltransferases (Gtfs; GtfB, GtfC and GtfD). To monitor the contribution of these particular Gtfs, isogenic mutants of S. mutans were constructed by specific gene inactivation and compared to the wild-type under sucrose and non-sucrose conditions. We report direct measurement of the mechanical properties associated with glucan macromolecules demonstrating that the local adhesion strength increases in a time-dependent process, with a decrease in the average number of rupture events. This finding suggests that S. mutans attaches mainly through glucans to surfaces in the presence of sucrose. In addition, a possible role of the Gtf proteins in sucrose-independent attachment is supported by the decreased adhesion properties of the GtfBCD mutant compared to the wild-type.

Change in cell stiffness is a new characteristic of cancer cells that affects the way they spread 1 , 2 . Despite several studies on architectural changes in cultured cell lines 1 , 3 , no ex vivo mechanical analyses of cancer cells obtained from patients have been reported. Using atomic force microscopy, we report the stiffness of live metastatic cancer cells taken from the body (pleural) fluids of patients with suspected lung, breast and pancreas cancer. Within the same sample, we find that the cell stiffness of metastatic cancer cells is more than 70% softer, with a standard deviation over five times narrower, than the benign cells that line the body cavity. Different cancer types were found to display a common stiffness. Our work shows that mechanical analysis can distinguish cancerous cells from normal ones even when they show similar shapes. These results show that nanomechanical analysis correlates well with immunohistochemical testing currently used for detecting cancer.

Coordinated group movement (swarming) is a key aspect of Myxococcus xanthus' social behavior. Here we report observation of domain structures formed by multiple cells within large three-dimensional swarming groups grown on amorphous glass substrates, using the atomic force microscope (AFM). Novel analyses revealed that 90% of the wild type swarms displayed some form of preferential cell alignment. In contrast, cells with mutations in the social and adventurous motility systems displayed a distinct lack of cell alignment. Video microscopy observations of domain features of in vivo swarming M. xanthus cells were also consistent with the AFM data. The results presented here reveal that unique domain formation within swarms of wild type cells is a biologically driven process requiring the social and adventurous motility systems and is not a statistical phenomenon or thermodynamic process arising from liquid crystal behavior.

Streptococcus mutans is known as a primary pathogen responsible for dental caries. One of the virulence factors of S. mutans in cariogenicity is its ability to attach to the tooth surface and form a biofilm. Several surface proteins have been shown to be involved in this process. A 29 kDa surface protein named wall-associated protein A (WapA, antigen A or antigen III), was previously used as a vaccine in animal studies for immunization against dental caries. However, the function of WapA in S. mutans is still not clear. This study characterized the function of WapA in cell surface structure and biofilm formation. Compared to the wild-type, the wapA mutant had much-reduced cell chain length, diminished cell-cell aggregation, altered cell surface ultrastructure, and unstructured biofilm architecture. Furthermore, in vivo force spectroscopy revealed that the cell surface of the wapA mutant was less sticky than that of the wild-type cells. More interestingly, these phenotypic differences diminished as sucrose concentration in the medium was increased to 0.5 %. Real-time RT-PCR analysis demonstrated that sucrose strongly repressed wapA gene expression in both planktonic and biofilm cells. These results suggest that the WapA protein plays an important structural role on the cell surface, which ultimately affects sucrose-independent cell-cell aggregation and biofilm architecture.

The reaction of methane and bromine is a mildly exothermic and exergonic example of free radical alkane activation. We show here that the reaction of methane and bromine (CH4:Br2 > or = 1) may yield either a kinetically or a thermodynamically determined bromomethane product distribution and proceeds in two main phases between 450 and 550 degrees C under ambient pressure on the laboratory time scale. This is in contrast to the highly exothermic methane fluorination or chlorination reactions, which give kinetic product distributions, and to the endergonic iodination of methane, which yields an equilibrium distribution of iodomethanes. The first phase of reaction between methane and bromine is a relatively rapid consumption of bromine to yield a kinetic methane bromination product distribution characterized by low methane conversion, low methyl bromide selectivity, and higher polybromomethane selectivity. In the second slower phase CHxBr(4-x) reproportionation leads to significantly higher methane conversion and higher methyl bromide selectivity. For methane bromination at 525 degrees C, CH4 conversion and CH3Br selectivity reach 73.5% and 69.5%, respectively, after ample (60 s) time for reproportionation. The high selectivity and simple configuration make this pathway an attractive candidate for scale-up in halogen-mediated methane partial oxidation processes.

Atomic force microscopy (AFM) has garnered much interest in recent years for its ability to probe the structure, function and cellular nanomechanics inherent to specific biological cells. In particular, we have used AFM to probe the important structure-function relationships of the bacterium Streptococcus mutans. S. mutans is the primary aetiological agent In human dental caries (tooth decay), and is of medical importance due to the virulence properties of these cells in biofilm initiation and formation, leading to increased tolerance to antibiotics. We have used AFM to characterize the unique surface structures of distinct mutants of S. mutans. These mutations are located in specific genes that encode surface proteins, thus using AFM we have resolved characteristic surface features for mutant strains compared to the wild type. Ultimately, our characterization of surface morphology has shown distinct differences in the local properties displayed by various S. mutans strains on the nanoscale, which is imperative for understanding the collective properties of these cells in biofilrn formation.