Actin is essential for the survival and pathogenicity of the Apicomplexan parasite Toxoplasma gondii, where it plays essential functions in cargo transport, invasion, egress, and organelle inheritance. Recent work has shown that, unlike vertebrate skeletal muscle actin, purified T . gondii actin fi la- ments (TgAct1) can undergo rapid treadmilling, due to large differences in the barbed- and pointed-end critical concentrations, rapid subunit dissociation from fi lament ends, and a rapid nucleotide exchange rate constant from free monomers. Previous structural analysis suggested that the unique assembly properties of TgAct1 fi laments may be a functional consequence of reduced contacts between the DNAse-1-binding loop (D-loop) of a fi lament subunit and its adjacent, long-axis subunit neighbor. Because the D-loop makes stabilizing interactions between neighboring subunits, it has been implicated in regulating the mechanical properties of actin fi laments. In this study, we measured the bending persistence length (LB) of TgAct1 fi laments and the fi lament length distribution. We found that despite compromised intersubunit Dloop contacts, TgAct1 fi laments have similar bending stiffness and thermodynamic stability as vertebrate actin fi laments. Analysis of published cryo-EM image density maps indicates that TgAct1 fi laments retain a stabilizing intersubunit salt bridge between E168 and K62 and reveals visible density between Y167 and S61 of adjacent fi lament subunits, consistent with a conserved cation binding site proximal to the D-loop, as initially identified in vertebrate skeletal muscle actin fi laments. These results favor a mechanism in which weak D-loop interactions compromise TgAct1 subunit incorporation at fi la- ment ends, while minimally affecting overall subunit interactions within fi laments.

Actin is essential for the survival and pathogenicity of the Apicomplexan parasite Toxoplasma gondii, where it plays essential functions in cargo transport, invasion, egress, and organelle inheritance. Recent work has shown that, unlike vertebrate skeletal muscle actin, purified T. gondii actin filaments (TgAct1) can undergo rapid treadmilling, due to large differences in the barbed- and pointed-end critical concentrations, rapid subunit dissociation from filament ends, and a rapid nucleotide exchange rate constant from free monomers. Previous structural analysis suggested that the unique assembly properties of TgAct1filaments may be a functional consequence of reduced contacts between the DNAse-1 binding loop (D-loop) of a filament subunit and its adjacent, long-axis subunit neighbor. Because the D-loop makes stabilizing interactions between neighboring subunits, it has been implicated in regulating the mechanical properties of actin filaments. In this study, we measured the bending persistence length (LB) of TgAct1 filaments and the filament length distribution. We found that despite compromised intersubunit D-loop contacts, TgAct1 filaments have similar bending stiffness and thermodynamic stability as vertebrate actin filaments. Analysis of published cryoEM image density maps indicates that TgAct1 filaments retain a stabilizing inter-subunit salt bridge between E168 and K62 and reveals visible density between Y167 and S61 of adjacent filament subunits, consistent with a conserved cation binding site proximal to the D-loop, as initially identified in vertebrate skeletal muscle actin filaments. These results favor a mechanism in which weak D-loop interactions compromise TgAct1 subunit incorporation at filament ends, while minimally affecting overall subunit interactions within filaments.

The cytoskeletal protein actin plays a critical role in the pathogenicity of the intracellular parasite, Toxoplasma gondii , mediating invasion and egress, cargo transport, and organelle inheritance. Advances in live cell imaging have revealed extensive filamentous actin networks in the Apicomplexan parasite, but there are conflicting data regarding the biochemical and biophysical properties of Toxoplasma actin. Here, we imaged the in vitro assembly of individual Toxoplasma actin filaments in real time, showing that native, unstabilized filaments grow tens of microns in length. Unlike skeletal muscle actin, Toxoplasma filaments intrinsically undergo rapid treadmilling due to a high critical concentration, fast monomer dissociation, and rapid nucleotide exchange. Cryo-EM structures of jasplakinolide-stabilized and native (i.e. unstabilized) filaments show an architecture like skeletal actin, with differences in assembly contacts in the D-loop that explain the dynamic nature of the filament, likely a conserved feature of Apicomplexan actin. This work demonstrates that evolutionary changes at assembly interfaces can tune the dynamic properties of actin filaments without disrupting their conserved structure.

Many single-celled eukaryotes have complex cell morphologies defined by microtubules arranged into higher-order structures. The auger-like shape of the parasitic protist Trypanosoma brucei (T. brucei) is mediated by a parallel array of microtubules that underlies the plasma membrane. The subpellicular array must be partitioned and segregated using a microtubule-based mechanism during cell division. We previously identified an orphan kinesin, KLIF, that localizes to the ingressing cleavage furrow and is essential for the completion of cytokinesis. We have characterized the biophysical properties of a truncated KLIF construct in vitro to gain mechanistic insight into the function of this novel kinesin. We find that KLIF is a non-processive dimeric kinesin that dynamically crosslinks microtubules. Microtubules crosslinked by KLIF in an antiparallel orientation are translocated relative to one another, while microtubules crosslinked parallel to one another remain static, resulting in the formation of organized parallel bundles. In addition, we find that KLIF stabilizes the alignment of microtubule plus ends. These features provide a mechanistic understanding for how KLIF functions to form a new pole of aligned microtubule plus ends that defines the shape of the new cell posterior, which is an essential requirement for the completion of cytokinesis in T. brucei.

Trypanosoma brucei, the causative agent of human African trypanosomiasis, is highly motile and must be able to move in all three dimensions for reliable cell division. These characteristics make long-term microscopic imaging of live T. brucei cells challenging, which has limited our understanding of important cellular events. To address this issue, we devised an imaging approach that confines cells in small volumes within cast agarose microwells that can be imaged continuously for up to 24 h. Individual T. brucei cells were imaged through multiple rounds of cell division with high spatial and temporal resolution. We developed a strategy that employs in-well "sentinel" cells to monitor potential imaging toxicity during loss-of-function experiments such as small-molecule inhibition and RNAi. Using our approach, we show that the asymmetric daughter cells produced during T. brucei division subsequently divide at different rates, with the old-flagellum daughter cell dividing first. The flagellar detachment phenotype that appears during inhibition of the Polo-like kinase homolog TbPLK occurs in a stepwise fashion, with the new flagellum initially linked by its tip to the old, attached flagellum. We probe the feasibility of a previously proposed "back-up" cytokinetic mechanism and show that cells that initiate this process do not appear to complete cell division. This live-cell imaging method will provide a novel avenue for studying a wide variety of cellular events in trypanosomatids that have previously been inaccessible.

Many single-celled eukaryotes have complex cell morphologies defined by cytoskeletal elements comprising microtubules arranged into higher-order structures. Trypanosoma brucei ( T. brucei ) cell polarity is mediated by a parallel array of microtubules that underlie the plasma membrane and define the auger-like shape of the parasite. The subpellicular array must be partitioned and segregated using a microtubule-based mechanism during cell division. We previously identified an orphan kinesin, KLIF, that localizes to the division plane and is essential for the completion of cytokinesis. To gain mechanistic insight into how this novel kinesin functions to complete cleavage furrow ingression, we characterized the biophysical properties of the KLIF motor domain in vitro . We found that KLIF is a non-processive dimeric kinesin that dynamically crosslinks microtubules. Microtubules crosslinked in an antiparallel orientation are translocated relative to one another by KLIF, while microtubules crosslinked parallel to one another remain static, resulting in the formation of organized parallel bundles. In addition, we found that KLIF stabilizes the alignment of microtubule plus ends. These features provide a mechanistic understanding for how KLIF functions to form a new pole of aligned microtubule plus ends that defines the shape of the new posterior, which is a unique requirement for the completion of cytokinesis in T. brucei .

Microtubules are inherently dynamic cytoskeletal polymers whose length and organization can be altered to perform essential functions in eukaryotic cells, such as providing tracks for intracellular trafficking and forming the mitotic spindle. Microtubules can be bundled to create more stable structures that collectively propagate force, such as in the flagellar axoneme, which provides motility. The subpellicular microtubule array of the protist parasite Trypanosoma brucei, the causative agent of African sleeping sickness, is a remarkable example of a highly specialized microtubule bundle. It is comprised of a single layer of microtubules that are crosslinked to each other and to the overlying plasma membrane. The array microtubules appear to be highly stable and remain intact throughout the cell cycle, but very little is known about the pathways that tune microtubule properties in trypanosomatids. Here, we show that the subpellicular microtubule array is organized into subdomains that consist of differentially localized array-associated proteins at the array posterior, middle, and anterior. The array-associated protein PAVE1 stabilizes array microtubules at the cell posterior and is essential for maintaining its tapered shape. PAVE1 and the newly identified protein PAVE2 form a complex that binds directly to the microtubule lattice, demonstrating that they are a true kinetoplastid-specific MAP. TbAIR9, which localizes to the entirety of the subpellicular array, is necessary for maintaining the localization of array-associated proteins within their respective subdomains of the array. The arrangement of proteins within the array likely tunes the local properties of array microtubules and creates the asymmetric shape of the cell, which is essential for parasite viability.

We investigated the role of full-length Drosophila Bicaudal D (BicD) binding partners in dynein-dynactin activation for mRNA transport on microtubules. Full-length BicD robustly activated dynein-dynactin motility only when both the mRNA binding protein Egalitarian (Egl) and K10 mRNA cargo were present, and electron microscopy showed that both Egl and mRNA were needed to disrupt a looped, auto-inhibited BicD conformation. BicD can recruit two dimeric dyneins, resulting in faster speeds and longer runs than with one dynein. Moving complexes predominantly contained two Egl molecules and one K10 mRNA. This mRNA-bound configuration makes Egl bivalent, likely enhancing its avidity for BicD and thus its ability to disrupt BicD auto-inhibition. Consistent with this idea, artificially dimerized Egl activates dynein-dynactin-BicD in the absence of mRNA. The ability of mRNA cargo to orchestrate the activation of the mRNP (messenger ribonucleotide protein) complex is an elegant way to ensure that only cargo-bound motors are motile.

The protist parasite Trypanosoma brucei is an obligate extracellular pathogen that retains its highly polarized morphology during cell division and has evolved a novel cytokinetic process independent of non-muscle myosin II. The polo-like kinase homolog TbPLK is essential for transmission of cell polarity during division and for cytokinesis. We previously identified a putative TbPLK substrate named Tip of the Extending FAZ 1 (TOEFAZ1) as an essential kinetoplastid-specific component of the T. brucei cytokinetic machinery. We performed a proximity-dependent biotinylation identification (BioID) screen using TOEFAZ1 as a means to identify additional proteins that are involved in cytokinesis. Using quantitative proteomic methods, we identified nearly 500 TOEFAZ1-proximal proteins and characterized 59 in further detail. Among the candidates, we identified an essential putative phosphatase that regulates the expression level and localization of both TOEFAZ1 and TbPLK, a previously uncharacterized protein that is necessary for the assembly of a new cell posterior, and a microtubule plus-end directed orphan kinesin that is required for completing cleavage furrow ingression. The identification of these proteins provides new insight into T. brucei cytokinesis and establishes TOEFAZ1 as a key component of this essential and uniquely configured process in kinetoplastids.

A hallmark of the well-studied vertebrate class Va myosin is its ability to take multiple steps on actin as a single molecule without dissociating, a feature called "processivity." Therefore, it was surprising when kinetic and single-molecule assays showed that human myosin Vc (MyoVc) was not processive on single-actin filaments [1-3]. We explored the possibility that MyoVc is processive only under conditions that resemble its biological context. Recently, it was shown that zymogen vesicles are transported on actin "superhighways" composed of parallel actin cables nucleated by formins from the plasma membrane [4]. Loss of these cables compromises orderly apical targeting of vesicles. MyoVc has been implicated in transporting secretory vesicles to the apical membrane [5]. We hypothesized that actin cables regulate the processive properties of MyoVc. We show that MyoVc is unique in taking variable size steps, which are frequently in the backward direction. Results obtained with chimeric constructs implicate the lever arm/rod of MyoVc as being responsible for these properties. Actin bundles allow single MyoVc motors to move processively. Remarkably, even teams of MyoVc motors require actin bundles to move continuously at physiological ionic strength. The irregular stepping pattern of MyoVc, which may result from flexibility in the lever arm/rod of MyoVc, appears to be a unique structural adaptation that allows the actin track to spatially restrict the activity of MyoVc to specialized actin cables in order to co-ordinate and target the final stages of vesicle secretion.

mRNA localization ensures correct spatial and temporal control of protein synthesis in the cell. We show that an in vitro single molecule approach, using purified recombinant full-length proteins and synthesized mRNA, provides insight into the mechanism by which localizing mRNAs are carried to their destination. A messenger ribonucleoprotein (mRNP) complex was reconstituted from a budding yeast class V myosin motor complex (Myo4p–She3p), an mRNA-binding adaptor protein (She2p), and a localizing mRNA (ASH1). The motion of the mRNP was tracked with high spatial (∼10 nm) and temporal (70 ms) resolution. Using this “bottom-up” methodology, we show that mRNA triggers the assembly of a high affinity double-headed motor-mRNA complex that moves continuously for long distances on actin filaments at physiologic ionic strength. Without mRNA, the myosin is monomeric and unable to move continuously on actin. This finding reveals an elegant strategy to ensure that only cargo-bound motors are activated for transport. Increasing the number of localization elements (“zip codes”) in the mRNA enhanced both the frequency of motile events and their run length, features which likely enhance cellular localization. Future in vitro reconstitution of mRNPs with kinesin and dynein motors should similarly yield mechanistic insight into mRNA transport by microtubule-based motors.

Sub-cellular localization of mRNA is a widely used mechanism to ensure correct spatial and temporal expression of proteins within the cell. A paradigm for localizing mRNAs is the ASH1 transcript in budding yeast which is transported by Myo4p, a class V myosin motor. We previously showed that Myo4p is a single-headed motor that tightly binds the adapter protein She3p. She3p also interacts with the mRNA-binding protein She2p, which recruits two Myo4p/She3p motors. This double-headed motor complex is processive at low salt, but becomes destabilized at physiological ionic strength, suggesting that other factors are required for Myo4p motility. To understand how Myo4p functions in the cell, we increased the complexity of our system by adding labeled mRNA cargo to the motor complex, forming a fully reconstituted messenger ribonucleoprotein complex (mRNP). This mRNP shows robust processivity at physiological ionic strength, thus providing a checkpoint to ensure that only Myo4p motors that are integrated into an mRNP are motile. The ASH1 transcript contains four sequence elements called "zipcodes", which bind She2p. To understand why ASH1 has multiple zipcodes, we reconstituted ASH1 mRNPs containing varying numbers of zipcodes. We find that transcripts with multiple zipcodes more effectively recruit a paired motor complex for transport. Metal-shadowed images of mRNPs show as many as 8 motors bound to native ASH1 transcripts, suggesting that these particles are likely optimized to move on the actin cables found in the cell. We find that mRNP motility on actin bundles shows dramatic enhancements in both run frequency and run length compared to single actin filaments. Thus, only by building complexity in vitro can one begin to fully understand how motors function in their cellular context.

Molecular motors are instrumental in mRNA localization, which provides spatial and temporal control of protein expression and function. To obtain mechanistic insight into how a class V myosin transports mRNA, we performed single-molecule in vitro assays on messenger ribonucleoprotein (mRNP) complexes reconstituted from purified proteins and a localizing mRNA found in budding yeast. mRNA is required to form a stable, processive transport complex on actin-an elegant mechanism to ensure that only cargo-bound motors are motile. Increasing the number of localizing elements ('zip codes') on the mRNA, or configuring the track to resemble actin cables, enhanced run length and event frequency. In multi-zip-code mRNPs, motor separation distance varied during a run, thus showing the dynamic nature of the transport complex. Building the complexity of single-molecule in vitro assays is necessary to understand how these complexes function within cells.

Myo4p, one of two class V myosins in budding yeast, continuously transports messenger RNA (mRNA) cargo in the cell but is nonprocessive when characterized in vitro. The adapter protein She3p tightly binds to the Myo4p rod, forming a single-headed motor complex. In this paper, we show that two Myo4p–She3p motors are recruited by the tetrameric mRNA-binding protein She2p to form a processive double-headed complex. The binding site for She3p was mapped to a single α helix that protrudes at right angles from She2p. Processive runs of several micrometers on yeast actin–tropomyosin filaments were observed only in the presence of She2p, and, thus, motor activity is regulated by cargo binding. While moving processively, each head steps ∼72 nm in a hand-over-hand motion. Coupling two high-duty cycle monomeric motors via a common cargo-binding adapter protein creates a complex with transport properties comparable with a single dimeric processive motor such as vertebrate myosin Va.

Summary Escherichia coli DNA polymerase IV, encoded by the dinB gene, is a member of the Y family of specialized DNA polymerases. Pol IV is capable of synthesizing past DNA lesions and may help to restart stalled replication forks. However, Pol IV is error‐prone, contributing to both DNA damage‐induced and stress‐induced (adaptive) mutations. Here we demonstrate that Pol IV interacts in vitro with Rep DNA helicase and that this interaction enhances Rep's helicase activity. In addition, Pol IV polymerase activity is stimulated by interacting with Rep, and Pol IV β clamp‐binding motif appears to be required for this stimulation. However, neither Rep's helicase activity nor its ability to bind DNA is required for it to stimulate Pol IV's polymerase activity. The interaction between Rep and Pol IV is biologically significant in vivo as Rep enhances Pol IV's mutagenic activity in stationary‐phase cells. These data indicate a new role for Rep in contributing to Pol IV‐dependent adaptive mutation. This functional interaction also provides new insight into how the cell might control or target Pol IV's mutagenic activity.

Fission yeast myosin-I (Myo1p) not only associates with calmodulin, but also employs a second light chain called Cam2p. cam2Δ cells exhibit defects in cell polarity and growth consistent with a loss of Myo1p function. Loss of Cam2p leads to a reduction in Myo1p levels at endocytic patches and a 50% drop in the rates of Myo1p-driven actin filament motility. Thus, Cam2p plays a significant role in Myo1p function. However, further studies indicated the existence of an additional Cam2p-binding partner. Cam2p was still present at cortical patches in myo1Δ cells (or in myo1-IQ2 mutants, which lack an intact Cam2p-binding motif), whereas a cam2 null (cam2Δ) suppressed cytokinesis defects of an essential light chain (ELC) mutant known to be impaired in binding to PI 4-kinase (Pik1p). Binding studies revealed that Cam2p and the ELC compete for Pik1p. Cortical localization of Cam2p in the myo1Δ background relied on its association with Pik1p, whereas overexpression studies indicated that Cam2p, in turn, contributes to Pik1p function. The fact that the Myo1p-associated defects of a cam2Δ mutant are more potent than those of a myo1-IQ2 mutant suggests that myosin light chains can contribute to actomyosin function both directly and indirectly (via phospholipid synthesis at sites of polarized growth).

Myosin-II (Myo2p) and tropomyosin are essential for contractile ring formation and cytokinesis in fission yeast. Here we used a combination of in vivo and in vitro approaches to understand how these proteins function at contractile rings. We find that ring assembly is delayed in Myo2p motor and tropomyosin mutants, but occurs prematurely in cells engineered to express two copies of myo2. Thus, the timing of ring assembly responds to changes in Myo2p cellular levels and motor activity, and the emergence of tropomyosin-bound actin filaments. Doubling Myo2p levels suppresses defects in ring assembly associated with a tropomyosin mutant, suggesting a role for tropomyosin in maximizing Myo2p function. Correspondingly, tropomyosin increases Myo2p actin affinity and ATPase activity and promotes Myo2p-driven actin filament gliding in motility assays. Tropomyosin achieves this by favoring the strong actin-bound state of Myo2p. This mode of regulation reflects a role for tropomyosin in specifying and stabilizing actomyosin interactions, which facilitates contractile ring assembly in the fission yeast system.

We investigated the role of regulatory light-chain (Rlc1p) and heavy-chain phosphorylation in controlling fission yeast myosin-II (Myo2p) motor activity and function during cytokinesis. Phosphorylation of Rlc1p leads to a fourfold increase in Myo2p's in vitro motility rate, which ensures effective contractile ring constriction and function. Surprisingly, unlike with smooth muscle and nonmuscle myosin-II, RLC phosphorylation does not influence the actin-activated ATPase activity of Myo2p. A truncated form of Rlc1p lacking its extended N-terminal regulatory region (including phosphorylation sites) supported maximal Myo2p in vitro motility rates and normal contractile ring function. Thus, the unphosphorylated N-terminal extension of Rlc1p can uncouple the ATPase and motility activities of Myo2p. We confirmed the identity of one out of two putative heavy-chain phosphorylation sites previously reported to control Myo2p function and cytokinesis. Although in vitro studies indicated that phosphorylation at Ser-1444 is not needed for Myo2p motor activity, phosphorylation at this site promotes the initiation of contractile ring constriction.