We present Gemini/GHOST high-resolution spectra of five stars observed in two low surface brightness Milky Way satellites, Sagittarius II (Sgr2) and Aquarius II (Aqu2). For Aqu2, the velocities and metallicities of the two stars are consistent with membership in a dark-matter-dominated ultra-faint dwarf galaxy (UFD). The chemical abundance ratios suggest inefficient star formation from only one or a few supernovae (e.g., low Na, Sr, Ba), and enriched potassium (K) from super-AGB stars. For Sgr2, the velocity and metallicity dispersions of its members are not clearly resolved, and our detailed chemical abundances show typical ratios for metal-poor stars, with low dispersions. There is only one exception—we report the discovery of an r -process enhanced star (Sgr 2584, [Eu/Fe] = +0.7 ± 0.2; thus, an r-I star). As r-I stars are found in both UFDs (Tuc III, Tuc IV, and Grus II) and globular clusters (M15 and M92), then this does not help to further classify the nature of Sgr2. Our exploration of Sgr2 demonstrates the difficulty in classifying some of the faintest (ambiguous) satellites. We advocate for additional diagnostics in analyzing the ambiguous systems, such as exploring radial segregation (by mass and/or chemistry), N -body simulations, and the need for dark matter to survive Galactic tidal effects. The spectra analyzed in this paper were taken as part of the GHOST commissioning observations, testing faint observation limits ( G < 18.8) and the single and double integrated field unit observing modes.

MAVIS is the world’s first facility-grade visible MCAO instrument, currently under development for the VLT. The AO system will feed an imager and an integral field spectrograph, with 50% sky coverage at the Galactic pole. MAVIS has unique angular resolution and sensitivity at visible wavelengths, and is highly complementary to both JWST and ELTs. We describe both instruments in detail and the broad range of science cases enabled by them. The imager will be diffraction-limited in V, with 7.36 mas per pixel covering a 30” FOV. A set of at least 7 broad-band and 15 narrow-band filters will provide imaging from u to z. The spectrograph uses an advanced image slicer with a selectable spatial sampling of 25 or 50 mas to provide integral field spectroscopy over a FOV of 2.5”x3.6”, or 5”x7.2”. The spectrograph has two identical arms each covering half the FOV. Four interchangeable grisms allow spectroscopy with R=5,000 to R=15,000, from 380-950 nm.

We present a design for a wide-field spectroscopic telescope. The only large powered mirror is spherical, the resulting spherical aberration is corrected for each target separately, giving exceptional image quality. The telescope is a transit design, but still allows all-sky coverage. Three simultaneous modes are proposed: (a) natural seeing multi-object spectroscopy with 12m aperture over 3dg FoV with ~25,000 targets; (b) multi-object AO with 12m aperture over 3dg FoV with ~100 AO-corrected Integral Field Units each with 4 arcsec FoV; (c) ground layer AO-corrected integral field spectroscopy with 15m aperture and 13 arcmin FoV. Such a telescope would be uniquely powerful for large-area follow-up of imaging surveys; in each mode, the AOmega and survey speed exceed all existing facilities combined. The expected cost of this design is relatively modest, much closer to $500M than $1000M.

The Gemini High-resolution Optical SpecTrograph (GHOST) is a new echelle spectrograph available on the Gemini-South telescope as of Semester 2024A. We present the first high resolution spectrum of the quasar J1449-1227 (redshift z_em=3.27) using data taken during the commissioning of GHOST. The observed quasar hosts an intervening iron-poor ([Fe/H] = -2.5) damped Lyman alpha (DLA) system at redshift z=2.904. Taking advantage of the high spectral resolving power of GHOST (R~55000), we are able to accurately model the metal absorption lines of the metal-poor DLA and find a supersolar [Si/Fe], suggesting the DLA gas is in an early stage of chemical enrichment. Using simple ionization models, we find that the large range in the C IV/Si IV column density ratio of individual components within the DLA's high ionization absorption profile can be reproduced by several metal-poor Lyman limit systems surrounding the low-ionization gas of the DLA. It is possible that this metal-poor DLA resides within a complex system of metal-poor galaxies or filaments with inflowing gas. The high spectral resolution, wavelength coverage and sensitivity of GHOST makes it an ideal spectrograph for characterizing the chemistry and kinematics of quasar absorption lines.

AOB is an Adaptive Optics (AO) facility currently designed to feed the Gemini infrared Multi Object Spectrograph (GIRMOS) on the GEMINI North 8m class telescope located in Hawaii. This AO system will be made of two AO modes. A laser tomography AO (LTAO) mode using 4 LGS (laser guide stars) and [1-3] NGS (natural guide stars) for high performance over a narrow field of view (a few a rcsec). The LTAO reconstruction will benefit from the most recent developments in the field, such as the super-resolution concept for the multi-LGS tomographic system, the calibration and optimization of the system on the sky, etc. The system will also operate in Ground Layer Adaptive Optics (GLAO) mode providing a robust solution for homogeneous partial AO correction over a wide 2' FOV. This last mode will also be used as a first s tep of a MOAO (Multi-object adaptive optics) mode integrated in the GIRMOS instrument. Both GLAO and LTAO modes are optimized to provide the best possible sky coverage, up to 60% at the North Galactic Pole. Finally, the project has been designed from day one as a fast-track, cost effective project, aiming to provide a first scientific light on the telescope by 2028 at the latest, with a good balance of innovative and creative concepts combined with standard and well controlled components and solutions. In this paper, we will present the innovative concepts, design and performance analysis of the two AO modes (LTAO and GLAO) of the AOB project.

The Gemini High Resolution Optical Spectrograph (GHOST) is a fiber-fed spectrograph system on the Gemini South telescope that provides simultaneous wavelength coverage from 348 - 1061nm, and designed for optimal performance between 363 - 950nm. It can observe up to two objects simultaneously in a 7.5 arcmin diameter field of regard at R = 56,000 or a single object at R = 75,000. The spectral resolution modes are obtained by using integral field units to image slice a 1.2" aperture by a factor of five in width using 19 fibers in the high resolution mode and by a factor of three in width using 7 fibers in the standard resolution mode. GHOST is equipped with hardware to allow for precision radial velocity measurements, expected to approach meters per second precision. Here, we describe the basic design and operational capabilities of GHOST, and proceed to derive and quantify the key aspects of its on-sky performance that are of most relevance to its science users.

The Gemini High-resolution Optical SpecTrograph (GHOST) is the newest high-resolution spectrograph to be developed for a large-aperture telescope, recently deployed and commissioned at the Gemini-South telescope. In this paper, we present the first science results from the GHOST spectrograph taking during its commissioning runs. We have observed the bright metal-poor benchmark star HD 122563, along with two stars in the ultrafaint dwarf galaxy Reticulum II (Ret ii ), one of which was previously identified as a candidate member, but did not have a previous detailed chemical abundance analysis. We find that this candidate (GDR3 0928) to be a bona fide member of Ret ii , and from a spectral synthesis analysis it is also revealed to be a CEMP- r star, with significant enhancements in several light elements (C, N, O, Na, Mg, and Si), in addition to featuring an r -process enhancement like many other Ret ii stars. The light-element enhancements in this star resemble the abundance patterns seen in the CEMP-no stars of other ultrafaint dwarf galaxies, and are thought to have been produced by an independent source from the r -process. These unusual abundance patterns are thought to be produced by faint supernovae, which may be produced by some of the earliest generations of stars.

The proposed MAVIS instrument for the VLT UT4 delivers a 30" x 30" MCAO-corrected field for 370-950nm. It includes an integral-field spectroscopic mode, whereby a subsection of the field is delivered to an image slicer and spectrograph, with either 25mas or 50mas spatial sampling, and R<4000 and R<10000 modes in either the red or the blue. Three designs are being considered for the image slicer, two with all-reflective optics, and the other, presented here, derived from the existing WiFeS spectrograph and including arrays of small lenses. A spectrograph design is also presented, challenging because of the need to be close to diffraction-limited across the entire wavelength range, while maintaining high throughput, in all 4 modes and over the entire 9cm x 9cm detector.

The Australian Astronomical Observatory’s (AAO’s) AESOP project is part of the Multi-Object Spectrograph Telescope (4MOST) system for the VISTA telescope. It includes the 2436-fibre positioner, space frame and electronics enclosures. The AESOP concept and the role of the AAO in the 4MOST project have been described in previous SPIE proceedings. The project final assembly stage has recently been completed. In this paper, key results in accurate manufacturing and assembly of critical AESOP components are discussed. The major performance requirement for AESOP is that all 2436 science fibre cores and 12 guide fibre bundles are to be re-positioned to an accuracy of 10 micron within 1 minute. With a fast prime-focus focal-ratio, a close tolerance of +/-70 microns on the axial position of the fibre tips must be held so efficiency does not suffer from de-focus losses. Positioning accuracy is controlled with the metrology cameras installed on the telescope, which measures the positions of the fibre tips to an accuracy of a few micrometers and allows iterative positioning until all fibre tips are within tolerance on the ultimate position. Maintaining co-planarity of the fibre tips requires accurate control in the assembly of several components that contribute to such errors. Overall, the AESOP design fully complies with all its requirements and in most cases achieves its goals. A thorough consideration of all the relevant interfaces during the design and assembly phases, has resulted in comprehensive set of ICDs for the mechanical, electrical and software aspects of AESOP.

The Sloan Digital Sky Survey V (SDSS–V) is an all-sky spectroscopic survey of <6 million objects, designed to decode the history of the Milky Way, reveal the inner workings of stars, investigate the origin of solar systems, and track the growth of supermassive black holes across the universe. The Local Volume Mapper (LVM) is a facility designed to provide a contiguous 2500 deg2 integral-field survey over a 3.5 year period from Las Campa˜nas Observatory (LCO) in Chile. The facility comprises four 0.16 m bench-mounted telescopes that feed three multiobject spectrographs with 1801 science fibres, 119 calibration fibres, and 24 sky-background fibres. The fibre cable spans approximately 20 meters from the telescope platform to the spectrograph slits. A sorting hat, located in the spectrograph room, redistributes the 1944 fibres into three 648–element bundles that terminate at the spectrograph slits. In this paper, we briefly summarize the current production progress of the integral-field units, the spectrograph slits, and the sorting hat.