Raytheon is developing NIR sensor chip assemblies (SCAs) for scanning and staring 3D LADAR systems. High sensitivity is obtained by integrating high performance detectors with gain, i.e., APDs with very low noise Readout Integrated Circuits (ROICs). Unique aspects of these designs include: independent acquisition (non-gated) of pulse returns, multiple pulse returns with both time and intensity reported to enable full 3D reconstruction of the image. Recent breakthrough in device design has resulted in HgCdTe APDs operating at 300K with essentially no excess noise to gains in excess of 100, low NEP <1nW and GHz bandwidths and have demonstrated linear mode photon counting. SCAs utilizing these high performance APDs have been integrated and demonstrated excellent spatial and range resolution enabling detailed 3D imagery both at short range and long ranges. In the following we will review progress in real-time 3D LADAR imaging receiver products in three areas: (1) scanning 256 × 4 configuration for the Multi-Mode Sensor Seeker (MMSS) program and (2) staring 256 × 256 configuration for the Autonomous Landing and Hazard Avoidance Technology (ALHAT) lunar landing mission and (3) Photon-Counting SCAs which have demonstrated a dramatic reduction in dark count rate due to improved design, operation and processing.

Raytheon is developing NIR sensor chip assemblies (SCAs) for scanning and staring 3D LADAR systems. High sensitivity is obtained by integrating high performance detectors with gain, i.e., APDs with very low noise Readout Integrated Circuits (ROICs). Unique aspects of these designs include: independent acquisition (non-gated) of pulse returns, multiple pulse returns with both time and intensity reported to enable full 3D reconstruction of the image. Recent breakthrough in device design has resulted in HgCdTe APDs operating at 300K with essentially no excess noise to gains in excess of 100, low NEP <1nW and GHz bandwidths and have demonstrated linear mode photon counting. SCAs utilizing these high performance APDs have been integrated and demonstrated excellent spatial and range resolution enabling detailed 3D imagery both at short range and long ranges. In the following we will review progress in real-time 3D LADAR imaging receiver products in two areas: (1) scanning 256 x 4 configuration for the Multi-Mode Sensor Seeker (MMSS) program and (2) staring 256 x 256 configuration for the Autonomous Landing and Hazard Avoidance Technology (ALHAT) lunar landing mission.

Raytheon is developing HgCdTe APD arrays and sensor chip assemblies (SCAs) for scanning and staring LADAR systems. The nonlinear characteristics of APDs operating in moderate gain mode place severe requirements on layer thickness and doping uniformity as well as defect density. MBE based HgCdTe APD arrays, engineered for high performance, meet the stringent requirements of low defects, excellent uniformity and reproducibility. In situ controls for alloy composition and substrate temperature have been implemented at HRL, LLC and Raytheon Vision Systems and enable consistent run to run results. The novel epitaxial designed using separate absorption-multiplication (SAM) architectures enables the realization of the unique advantages of HgCdTe including: tunable wavelength, low-noise, high-fill factor, low-crosstalk, and ambient operation. Focal planes built by integrating MBE detectors arrays processed in a 2 x 128 format have been integrated with 2 x 128 scanning ROIC designed. The ROIC reports both range and intensity and can detect multiple laser returns with each pixel autonomously reporting the return. FPAs show exceptionally good bias uniformity <1% at an average gain of 10. Recent breakthrough in device design has resulted in APDs operating at 300K with essentially no excess noise to gains in excess of 100, low NEP <1nW and GHz bandwidth. 3D LADAR sensors utilizing these FPAs have been integrated and demonstrated both at Raytheon Missile Systems and Naval Air Warfare Center Weapons Division at China Lake. Excellent spatial and range resolution has been achieved with 3D imagery demonstrated both at short range and long range. Ongoing development under an Air Force Sponsored MANTECH program of high performance HgCdTe MBE APDs grown on large silicon wafers promise significant FPA cost reduction both by increasing the number of arrays on a given wafer and enabling automated processing.