A method has been developed for manufacturing biological microchips on an aluminum substrate with hydrophilic cells from brush copolymers with the formation of a matrix of cells using photolithography. The surface of aluminum substrates was previously coated with a thin, durable, moderately hydrophobic layer of cross-linked polymer to prevent contact with the aluminum surface of the components used in the analysis of nucleic acids. Aluminum biochip substrates have high thermal conductivity and low heat capacity, which is important for the development of methods for multiplex PCR analysis on a chip. Oligonucleotide probes were covalently immobilized in the cells of the biochip. The preservation of the hybridization activity of the immobilized DNA probes was demonstrated in a hybridization analysis with a synthetic DNA target representing a section of the sequence of the seventh exon of the human ABO gene. The methods developed can be used in the development of a technology for parallel multiple rapid microanalysis of nucleic acids “lab on a chip” for the detection of human somatic and infectious diseases.

Objective: Polyethylene terephthalate (PET) is thermally stable, biocompatible, transparent in visible and near-infrared light. The study of grafting conditions and the distribution of reactive amino groups on the PET surface without affecting the polymer array makes it possible to change the surface properties in a directed manner. Methods: A method for obtaining active amino groups on the surface of polyethylene terephthalate (PET) substrate by reaction with ethylenediamine was developed. A method for quantitative estimation of the concentration and distribution of chemically accessible amino groups on the surface of PET substrate using cyanine dye Cy5 and digital fluorescence microscopy was developed. Results and Discussion: The PET surface during chemical modification remains without visible damage up to the concentration of amino groups 8 pmol/cm2, while surface degradation is observed at higher concentrations. Chemically available amino groups capable of covalently binding to Cy5 dye are distributed unevenly, which is probably due to the presence of amorphous and crystalline areas on the surface of PET substrates. Amino groups can be used for further chemical modification of the PET surface, grafting of various functional groups, and covalent binding to biomolecules, which opens up prospects for the wide use of inexpensive PET as functional substrates in biochips, biosensors, lab-on-a-chip devices, and other biotechnological applications.

A genotyping procedure based on single-step PCR and subsequent allele-specific hybridization on a hydrogel biochip was developed to address the polymorphisms of HERC2, OCA2, SLC24A4, SLC45A2, TYR, IRF4, MC1R, MITF, PIGU, MYH7B, NCOA6, and CDK10. Amplified gene fragments were fluorescently labeled in PCR, and fluorescent signals from biochip cells were detected to evaluate how efficiently the PCR product formed a perfect duplex with an immobilized probe. The analytical characteristics of hybridization analysis were estimated for several fluorophores with different optical spectra. Cyanine dyes fluorescing in the range of Cy5 and Cy7 were synthesized for the purpose and used as 5'-tags of universal primers in single-step PCR. A Cy7 analog fluorescing in the near infrared range was found to increase the sensitivity of hybridization analysis by producing a lower background signal in the cases where target gene amplification was low.

A method to estimate the concentration of chemically accessible carboxylic groups on the surface of a polyethylene terephthalate (PET) film was developed using the fluorochrome cycanine Cy5 and digital fluorescence microscopy. A method was developed to activate the carboxylic groups on the PET surface and to allow covalent immobilization of amino group-containing molecular constructs.

A microarray analyzer was developed to obtain images and measure the fluorescence intensity of microarrays at three wavelengths from 380 nm to 850 nm. The analyzer contains lasers to excite fluorescence, barrier filters, optics to project images on an image detector, and a device for suppressing laser speckles on the microarray support. The speckle suppression device contains a fibre-optic bundle and a rotating mirror positioned in a way to change the distance between the bundle butt and mirror surface during each mirror revolution. The analyzer provides for measurements with accuracy within ± 5%. Obtaining images at several exposure times allowed a significant expansion in the range of measured fluorescence intensities. The analyzer is useful for high throughput analysis of the same type of microarrays.

A comparative study of various approaches to speckle reduction showed that the use of a liquid crystal-based speckle reducer did not allow complete elimination of speckles. The use of mechanical devices for blurring of the speckle pattern in the field of view turned out to be more efficient in the case of quantitative luminescent microscopy. Virtually complete reduction of speckles was observed when a device that combines a ring-shaped fiber-optic light source and a vibration unit that shifts the butt-ends of optical fibers relative to the laser diode during measurement was used. This speckle-reduction approach was successfully used in microarray analysis.

In order to study the effect of an electrical charge of the chromophore, on the efficiency of incorporation of fluorescently-labeled nucleotides into DNA during PCR, three fluorescently-labeled dUPT, one of which with electroneutral and other two with positively and negatively charged dyes (Cy5 analogs), were synthesized. It is shown that dUPT, labeled with electroneutral Cy 5 analog, is most effectively incorporated into DNA when Tag polymerase is used for PCR.

The aim of this work was to compare different speckle reduction techniques. It was shown that the use of devices based on liquid crystals only leads to partial reduction of speckle contrast. In quantitative luminescent microscopy an application of the mechanical devices when a laser beam is spread within the field of view turned out to be more efficient. Laser speckle noise was virtually eliminated with the developed and manufactured mechanical device comprising a fiber optic ring light guide and the vibrator that permits movement of optical fiber ends towards the laser diode during measurements. The method developed for the analysis of microarrays was successfully applied to the problem of speckle reduction.

In order to expand the informational capabilities of molecular genetic research, new indotricarbocyanine dyes that fluoresce in the near infrared (IR) spectral region have been synthesized. The developed IR dyes were studied using a biochip-based test system for detection of mutations in the BRCA1/BRCA2 and CHECK2 genes associated with breast cancer. The fluorescent label was introduced to the analyzed DNA during PCR using primers labeled with the synthesized IR dyes. An analyzer that allows recording and processing of images of fluorescent microarrays in the IR spectral region was designed and manufactured. It has been shown that the use of the synthesized dyes enables to conduct analysis in the IR region and improve the reliability of medical diagnostic tests due to low fluorescence intensity of sample components as well as of a biochip substrate and the reagents used for analysis.

A biochip has been developd that enables one to determine Y-chromosome haplogroups C, DE, G, H, I, J, L, N, O, and R in the DNA sample. SNPs M130, M145, P257, M69, U179, M304, M185, M231, M175, P224 were selected as haplogroup markers, correspondingly. The genotyping included two-round PCR with fluorescent labeling of the product followed by hybridization with immobilized probes on the biochip. An analysis of the ratios of fluorescent signals for immobilized wild-type probe-group specific probe pairs for each of the chosen polymorphic markers showed a high accuracy Y-haplogroup genotyping using the biochip. The reliability of genotyping was confirmed by direct sequencing.

This paper discusses the development of biophysical methods for biochip analysis. A scheme and construction of a biochip analyzer based on wide-field digital fluorescence microscopy are described. The analyzer is designed to register images of biological microchips labeled with fluorescent dyes. The device developed is useful for high-sensitivity throughput recording of analyses with biochips after interaction of immobilized probes with fluorescently labeled sample molecules as well as it provides a higher rate of the analysis compared with laser scanning devices. With this analyzer, the scope where biological microchips can be applied becomes wider, development of new protocols of the analyses is possible and standard analyses run faster with the use of biochips, the expenses for performing routine analyses can be reduced.

The paper reviews the last period in the research work of A.D. Mirzabekov, when gel-based biochips were invented, studied, and introduced in practice. This work, starting from the early stages of the Human Genome Project up to the recent development of diagnostic and protein biochips, is considered in the context of the worldwide development of microarray technologies.

Настоящее изобретение относится к области молекулярной биологии, судебной медицины и криминалистики и касается способа генетической идентификации личности и определения его индивидуализирующих признаков (пол, группа крови и пр.) с помощью технологии гидрогелевых ДНК-микрочипов. Изобретение обеспечивает возможность по ряду генетических признаков определять вероятность происхождения биологического материала от того или иного подозреваемого, жертвы, участника преступного инцидента. Оно обладает тем преимуществом, что позволяет провести экспертизу в короткий срок и с небольшими (в сравнении с другими методами) материальными затратами. Другим преимуществом изобретения является возможность расширения спектра анализируемых локусов и, соответственно, повышения дискриминирующей силы экспертизы.

The NAT2 product, N-acetyltransferase 2, is involved in biotransformation and detoxification of several aromatic amines (in particular, 2-aminofluorene, 4-aminobiphenyl, and 4-naphthylamine), which are strongly mutagenic and carcinogenic, and acetylates some drugs, affecting their metabolism. A biological microchip was developed to detect 16 point mutations, which determine 36 alleles and 660 genotypes of NAT2. The genotypes can be divided into four groups according to the acetylator phenotype: groups with rapid (R/R), intermediate (R/S), or slow (S/S) acetylation and a group combining intermediate and slow alleles ("R/S or S/S"). The last group includes the alleles determined by combinations of seven mutations (191G/A, 282C/T, 341T/C, 481C/T, 590G/A, 803A/G, and 857G/A), whose cis or trans position is detectable by restriction enzyme analysis. The NAT2 genotype was unequivocally established for 37 out of 71 DNA specimens, while the other 34 specimens were characterized by more than two genotypes. By the acetylator phenotype, 16 out of the 34 genotypes were assigned to the group "R/S or S/S," combining mutations 282C/T, 341T/C, 481C/T, 590G/A, and 803A/G. Thus, the biochip allows primary analysis of most NAT2 polymorphic substitutions, the acetylator genotype being important to know in predictive medicine and individualized therapy.

The review describes the history of formation and development of the microchip technology and its role in the human genome project in Russia. The main accent was done on the three-dimensional gel-based microchips developed at the Center of Biological Microchips headed by A.D. Mirzabekov since 1988. The gel-based chips of the last generation, IMAGE chips (Immobilized Micro Array of Gel Elements), have a number of advantages over the previous models. The microchips are manufactured by photoinitiated copolymerization of gel components and immobilized molecules (DNA, proteins, and ligands). This ensures an even distribution of the immobilized probe throughout the microchip gel element with a high yield (about 50% for oligonucleotides). The use of methacrylamide as a main component of the polymerization mixture resulted in a substantial increase of gel porosity without affecting its mechanical properties and stability; this allowed one to work with the DNA fragments of up to 500 nt in length, as well as with quite large protein molecules. At present, the gel-based microchips are widely applied to solve different problems. The generic microchips containing a complete set of possible hexanucleotides are used to reveal the DNA motifs binding with different proteins and to study the DNA–protein interactions. The oligonucleotide microchips are a cheap and reliable diagnostic tool designed for mass application. Biochips have been developed for identification of the tuberculosis pathogen and its antibiotic-resistant forms; of orthopoxviruses, including the smallpox virus; of the anthrax pathogen; and chromosomal rearrangements in leukemia patients. The protein microchips can be adapted for further use in proteo-mics. Bacterial and yeast cells were also immobilized in the gel, maintaining their viability, which opens a wide potential for creating biosensors on the basis of microchips.

Here a simple, reproducible, and versatile method is described for manufacturing protein and ligand chips. The photo-induced copolymerization of acrylamide-based gel monomers with different probes (oligonucleotides, DNA, proteins, and low-molecular ligands) modified by the introduction of methacrylic groups takes place in drops on a glass or silicone surface. All probes are uniformly and chemically fixed with a high yield within the whole volume of hydrogel semispherical chip elements that are chemically attached to the surface. Purified enzymes, antibodies, antigens, and other proteins, as well as complex protein mixtures such as cell lysates, were immobilized on a chip. Avidin- and oligohistidine-tagged proteins can be immobilized within biotin- and Ni-nitrilotriacetic acid-modified gel elements. Most gel-immobilized proteins maintain their biological properties for at least six months. Fluorescence and chemiluminescence microscopy were used as efficient methods for the quantitative analysis of the microchips. Direct on-chip matrix-assisted laser desorption ionization-time of flight mass spectrometry was used for the qualitative identification of interacting molecules and to analyze tryptic peptides after the digestion of proteins in individual gel elements. We also demonstrate other useful properties of protein microchips and their application to proteomics and diagnostics.

The kinetics of hybridization on the oligonucleotide microchip with gel pads is studied both theoretically and experimentally. The monitoring of kinetics was performed with the measurements of fluorescence intensity produced by the labeled target oligonucleotides. As is shown, the hybridization time depends on the stability of the formed duplexes, the concentrations of target and probe oligonucleotides, and the diffusion of target oligonucleotides in solution and gel pad. The initial stage of hybridization is determined by the flow of target oligonucleotides from solution, then, followed by the diffusive propagation with approximately constant concentration of oligonucleotides at the boundary of gel pad and, finally, by the exponential saturation. The theoretical predictions of hybridization kinetics reveal a good correspondence with the experimental results and may be used for the choice of the optimal hybridization conditions. The possible applications of kinetic hybridization curves to the discrimination problems and assessment of diffusion coefficients in gel pads are briefly discussed. Finally, we discuss the relationships between the binding kinetics and the general functioning of biomolecular microchips.

The MAGIChip (MicroArrays of Gel-Immobilized Compounds on a chip) consists of an array of hydrophilic gel pads fixed on a hydrophobic glass surface. These pads of several picoliters to several nanoliters in volume contain gel-immobilized nucleic acids, proteins, and other compounds, as well as live cells. They are used to conduct chemical and enzymatic reactions with the immobilized compounds or samples bound to them. In the latter case, nucleic acid fragments can be hybridized, modified, and fractionated within the gel pads. The main procedures required to analyze nucleic acid sequences (PCR, detachment of primers and PCR-amplified products from a substrate, hybridization, ligation, and others) can be also performed within the microchip pads. A flexible, multipurpose, and inexpensive system has been developed to register the processes on a microchip. The system provides unique possibilities for research and biomedical applications, allowing one to register both equilibrium states and the course of reaction in real time. The system is applied to analyze both kinetic and thermodynamic characteristics of molecular interaction in the duplexes formed between nucleic acids and the probes immobilized within the microchip gel pads. Owing to the effect of stacking interaction of nucleic acids, the use of short oligonucleotides extends the possibilities of microchips for analysis of nucleic acid sequences, allowing one to employ the MALDI-TOF mass spectrometry to analyze the hybridization data. The specialized MAGIChips has been successfully applied to reveal single-nucleotide polymorphism of many biologically significant genes, to identify bacteria and viruses, to detect toxins and characterize the genes of pathogenic bacteria responsible for drug resistance, and to study translocations in the human genome. On the basis of the MAGIChip, protein microchips have been created, containing immobilized antibodies, antigens, enzymes, and many other substances, as well as microchips with gel-immobilized live cells.

The amino-reactive derivative of tetraphenylporphine meso-tetrakis[4-(carboxy)phenyl]porphine (TCPP) was synthesized, which is characterized by a high molar absorption coefficient (epsilon 416 = 36,500 M-1.cm-1). TCPP was covalently attached to oligonucleotides d(CG)5 [d(CG)5-TCPP] and d(TA)5 [d(TA)5-TCPP]. The spectral characteristics of these complexes were studied in 0.01 M phosphate buffer, pH 7 at 23 degrees C. UV-visible absorption spectra of these complexes have a clearly pronounced Soret band at (414 +/- 1) nm for d(CG)5-TCPP and at (412 +/- 1) nm for d(TA)5-TCPP. The fluorescence spectra of these complexes have maxima at (648 +/- 2) nm for d(CG)5-TCPP and at (658 +/- 2) nm for d(TA)5-TCPP. In this study we also determined fluorescence quantum yields q and fluorescence lifetimes tau [q = 0.099 +/- 0.011, tau = (9.0 +/- 0.3) ns for d(CG)5-TCPP and q = 0.080 +/- 0.011, tau = (8.7 +/- 0.3) ns for d(TA)5-TCPP]. A temperature rise from 5 to 50 degrees C produced only slight (within 23%) emission changes in both samples studied. Taking into account: a) high fluorescence yields (q), b) weak dependence of q on temperature, c) weak q dependence of q on the oligonucleotide type, we conclude that TCPP may be used as a sensitive fluorescence label in DNA studies.