Background: Infectious respiratory pathogens like SARS-CoV-2 and influenza frequently mutate, leading to the emergence of variants. This necessitates continuous updates to FDA-approved vaccines with booster shots targeting the circulating variants. Vaccine hesitancy and needle injections create inconvenience and contribute to reduced global vaccination rates. To address the burden of frequent painful injections, this manuscript explores the potential of non-invasive intranasal (IN) vaccine administration as an effective alternative to intramuscular (IM) shots. Further, as a proof-of-concept, an inactivated combination vaccine for COVID-19 and influenza was tested to eliminate the need for separate vaccinations. Methods: The methods involved encapsulating antigens and adjuvants in poly(lactic-co-glycolic acid) (PLGA) polymer matrices, achieving over 85% entrapment. The vaccine was evaluated in vitro for cytotoxicity and immunogenicity before being administered to 6–8-week-old Swiss Webster mice at weeks 0, 3, and 6. The mice were then assessed for antibody levels and cellular responses. Results: The intranasal microparticle (IN-MP) vaccine induced an innate immune response, autophagy, and were non-cytotoxic in vitro. In vivo, the vaccine led to high levels of virus-specific serum IgM, IgG, and IgA binding antibodies, as well as elevated IgG and IgA levels in the lung wash samples. The antibodies generated demonstrated neutralizing activity against the SARS-CoV-2 pseudovirus. Furthermore, the IN-MP vaccine prompted increased antigen-specific CD4+ and CD8+ T-cell responses in the vaccinated mice. Conclusions: The IN-MP combination vaccine produced immune responses comparable to or higher than the IM route, indicating its potential as an alternative to IM injections.

Background: Influenza virus is one of the major respiratory virus infections that is a global health concern. Although there are already approved vaccines, most are administered via the intramuscular route, which is usually painful, leading to vaccine hesitancy. To this end, exploring the non-invasive, transdermal vaccination route using dissolving microneedles would significantly improve vaccine compliance. Research on innovative vaccine delivery systems, such as antigen-loaded PLGA microparticles, has the potential to pave the way for a broader range of vaccine candidates. Methods: In this proof-of-concept study, a combination of the inactivated influenza A H1N1 virus and inactivated influenza A H3N2 virus were encapsulated in a biodegradable poly (lactic-co-glycolic acid) (PLGA) polymeric matrix within microparticles, which enhanced antigen presentation. The antigen PLGA microparticles were prepared separately using a double emulsion (w/o/w), lyophilized, and characterized. Next, the vaccine microparticles were assessed in vitro in dendritic cells (DC 2.4) for immunogenicity. To explore pain-free transdermal vaccination, the vaccine microparticles were loaded into dissolving microneedles and administered in mice (n = 5). Results: Our vaccination study demonstrated that the microneedle-based vaccine elicited strong humoral responses as demonstrated by high antigen-specific IgA, IgG, IgG1, and IgG2a antibodies in serum samples and IgA in lung supernatant. Further, the vaccine also elicited a strong cellular response as evidenced by high levels of CD4+ and CD8a+ T cells in lymphoid organs such as the lymph nodes and spleen. Conclusion: The delivery of influenza vaccine-loaded PLGA microparticles using microneedles would be beneficial to individuals experiencing needle-phobia, as well as the geriatric and pediatric population.

Influenza and SARS-CoV-2 viruses are both responsible for respiratory tract infections that have caused global outbreaks. Due to frequent mutations, the CDC recommends annual COVID-19 vaccination (CDC Staying Up to Date with COVID-19 Vaccines, 2025), and studies confirm the safety of co-administering it with the flu shot (CDC Getting a Flu Vaccine and Other Recommended Vaccines at the Same Time, 2025). A combination vaccine streamlines dual immunization, reducing the need for separate vaccinations. This study evaluates the immune response elicited by an intranasal microparticulate combination multivalent vaccine for Influenza and COVID-19. The intranasal route can generate mucosal antibodies that recognize and inhibit the virus at its point of entry. The nasal mucosa is highly vascularized, consisting of circulating immune cells that drain into lymphatic circulation to generate a systemic immune response. This non-invasive route of administration can also significantly benefit patients with needle phobia and vaccine hesitancy. The inactivated SARS-CoV-2 Omicron and Delta variants, along with the H1N1 and H3N2 variants of Influenza A were encapsulated into separate PLGA (co-polymer of lactic and glycolic acids) microparticle matrices utilizing a double emulsion method. The adjuvanted vaccine microparticles were administered to mice as one primary vaccination followed by one booster dose via the intranasal route. Serum and lung supernatant analysis revealed significantly higher antigen-specific IgA and IgG responses than controls. Isolated lymph nodes and spleens showed increased cytotoxic and helper T-cell activation. The intranasal vaccine effectively elicited a significant immune response which was comparable in relation to the intramuscular control vaccination. This supports the potential of an intranasal microparticulate combination vaccine as an effective, needle-free alternative for simultaneous immunization for Influenza and SARS-CoV-2.

Background: The neuropeptide oxytocin has been identified as a potential therapeutic molecule. However, the therapeutic potential of this molecule is limited due to the challenges faced in oxytocin delivery to the brain. Scientific innovation has led to the breakthrough discovery of many modalities to encapsulate molecules for targeted drug delivery, which can enhance oxytocin delivery to the brain. This research aimed to explore a microfluidics-based system that optimizes the formulation of cross-linked bovine serum albumin (BSA) nanoparticles encapsulating oxytocin. Methods: First, the formulation parameters were optimized using a design of experiments (DOE) by evaluating the effect of flow rate, polymer concentration, and the binary solvent mixture polarity on the nanoparticle size. Drug encapsulation efficiency, release, and kinetics profile were characterized. These oxytocin nanoparticles were conjugated to rabies virus glycoprotein (RVG), a brain-targeting ligand, and the conjugation efficiency was determined. Results: The sizes of the nanoparticles were between 50 nm and 75 nm with a <0.4 polydispersity index. The encapsulation efficiency was >80%. Approximately 58% of oxytocin was released from the nanoparticles within the first six hours, showing an initial burst that is ideal for seizure control and thereafter exhibiting the Korsmeyer–Peppas release kinetics. Conclusions: For the first time, we demonstrated the microfluidics method of formulating nanoparticles with particle size of less than 100 nm, with improved encapsulation efficiency and optimal release profile for oxytocin brain delivery.

Vaccines have been one of the most important medical inventions of modern times. Vaccination against infectious diseases has protected humans against the onslaught of deadly microorganisms and helped sustain humanity. Early antigens consisted of live or inactivated pathogens. However, to keep up with advanced pathogens, several novel vaccines, such as subunit and nucleic acid-based vaccines, have been developed. This chapter discusses the need for novel antigens and the resulting advances made with novel vaccine antigens. The discovery of novel vaccine antigens resulted in the advent of novel delivery systems to carry the novel antigens. This chapter describes the different carrier systems, such as novel formulations used to deliver the vaccine antigens. The success of vaccines also depends on vaccine compliance by patients. Even today, several people avoid vaccination due to the fear of needles. Thus, in addition to novel antigens and carrier systems, a great deal of research has gone into novel routes of administration. In addition to being painless, novel routes of vaccine administration may also contribute to vaccine efficacy. This chapter introduces the different novel routes of vaccine administration and deliberates the different formulations used to deliver the vaccine via the novel routes. Thus, this book describes recent advances in the field of novel vaccines.

Although the global Zika epidemic in 2015–16 fueled vaccine development efforts, there is no approved Zika vaccine or treatment available to date. Current vaccine platforms in clinical trials are administered via either subcutaneous or intramuscular injections, which are painful and decrease compliance. Therefore, in the present study, we explored Zika vaccine microparticles (MPs)-loaded dissolving microneedles (MNs) with adjuvant MPs encapsulating Alhydrogel® and MPL-A® administered via the transdermal route as a pain-free vaccine strategy. We characterized the MNs for needle length, pore formation, and dissolvability when applied to murine skin. Further, we evaluated the in vivo efficacy of vaccine MPs-loaded MNs with or without adjuvants by measuring the immune response after transdermal immunization. The vaccine MPs-loaded dissolving MNs with adjuvants induced significant IgG, IgG1, and IgG2a titers in immunized mice compared to the untreated control group. After the dosing regimen, the animals were challenged with Zika virus, monitored for seven days, and sacrificed to collect spleen and lymph nodes. The lymphocytes and splenocytes from the immunized mice showed significant expressions of helper (CD4) and cytotoxic (CD8a) cell surface markers compared to the control group. Thus, this study puts forth a ‘proof-of-concept’ for a pain-free transdermal vaccine strategy against Zika.

SARS-CoV-2, the causal agent of COVID-19, is a contagious respiratory virus that frequently mutates, giving rise to variant strains and leading to reduced vaccine efficacy against the variants. Frequent vaccination against the emerging variants may be necessary; thus, an efficient vaccination system is needed. A microneedle (MN) vaccine delivery system is non-invasive, patient-friendly, and can be self-administered. Here, we tested the immune response produced by an adjuvanted inactivated SARS-CoV-2 microparticulate vaccine administered via the transdermal route using a dissolving MN. The inactivated SARS-CoV-2 vaccine antigen and adjuvants (Alhydrogel® and AddaVax™) were encapsulated in poly(lactic-co-glycolic acid) (PLGA) polymer matrices. The resulting MP were approximately 910 nm in size, with a high percentage yield and percent encapsulation efficiency of 90.4%. In vitro, the vaccine MP was non-cytotoxic and increased the immunostimulatory activity measured as nitric oxide release from dendritic cells. The adjuvant MP potentiated the immune response of the vaccine MP in vitro. In vivo, the adjuvanted SARS-CoV-2 MP vaccine induced high levels of IgM, IgG, IgA, IgG1, and IgG2a antibodies and CD4+ and CD8+ T-cell responses in immunized mice. In conclusion, the adjuvanted inactivated SARS-CoV-2 MP vaccine delivered using MN induced a robust immune response in vaccinated mice.

Vaccines against SARS-CoV-2 have transformed the course of the COVID-19 pandemic with more than 30 authorizations. More than 2 billion people have been vaccinated with these vaccines developed on very different manufacturing platforms. We have reviewed the unprecedented work done in various aspects of the authorized vaccines and listed three potential improvements: 1) long-term stability at room-temperature conditions; 2) suitability for diverse populations such as infants, elderly, immune-compromised, and those with pre-existing or ongoing diseases; and 3) ability to act against different strains. In this article, we have discussed the current status of COVID-19 vaccines with respect to 1) diversity (strength and breadth) of initial immune responses and long-term immune memory; 2) prime-boost combinations that induce protection against variants; and 3) breakthrough infections. Further, we have listed host, product (critical quality attributes), and viral pathogenic factors that contribute to safety, efficacy, and effectiveness of vaccines. In addition, we have elaborated on the potential to (develop models and) determine the immune correlates that can predict long-term immune memory. The graphical representation of the abstract is provided as Fig. 1.

The objective of this "proof-of-concept" study was to evaluate the synergistic effect of a subunit microparticulate vaccine and microneedles (MN) assisted vaccine delivery system against a human coronavirus. Here, we formulated PLGA polymeric microparticles (MPs) encapsulating spike glycoprotein (GP) of SARS-CoV as the model antigen. Similarly, we formulated adjuvant MPs encapsulating Alhydrogel® and AddaVax™. The antigen/adjuvant MPs were characterized and tested in vitro for immunogenicity. We found that the antigen/adjuvant MPs were non-cytotoxic in vitro. The spike GP MPs + Alhydrogel® MPs + AddaVax™ MPs showed enhanced immunogenicity in vitro as confirmed through the release of nitrite, autophagy, and antigen presenting molecules with their co-stimulatory molecules. Next, we tested the in vivo efficacy of the spike GP MP vaccine with and without adjuvant MPs in mice vaccinated using MN. The spike GP MPs + Alhydrogel® MPs + AddaVax™ MPs induced heightened spike GP-specific IgG, IgG1 and IgG2a antibodies in mice. Also, spike GP MPs + Alhydrogel® MPs + AddaVax™ MPs enhanced expression of CD4+ and CD8+ T cells in secondary lymphoid organ like spleen. These results indicated spike GP-specific humoral immunity and cellular immunity in vivo. Thus, we employed the benefits of both the subunit vaccine MPs and dissolving MN to form a non-invasive and effective vaccination strategy against human coronaviruses.

Respiratory syncytial virus (RSV) is one of the leading causes of bronchiolitis and pneumonia in children ages five years and below. Recent outbreaks of the virus have proven that RSV remains a severe burden on healthcare services. Thus, a vaccine for RSV is a need of the hour. Research on novel vaccine delivery systems for infectious diseases such as RSV can pave the road to more vaccine candidates. Among many novel vaccine delivery systems, a combined system with polymeric nanoparticles loaded in dissolving microneedles holds a lot of potential. In this study, the virus-like particles of the RSV fusion protein (F-VLP) were encapsulated in poly (D, L-lactide-co-glycolide) (PLGA) nanoparticles (NPs). These NPs were then loaded into dissolving microneedles (MNs) composed of hyaluronic acid and trehalose. To test the in vivo immunogenicity of the nanoparticle-loaded microneedles, Swiss Webster mice were immunized with the F-VLP NPs, both with and without adjuvant monophosphoryl lipid A (MPL) NPs loaded in the MN. The mice immunized with the F-VLP NP + MPL NP MN showed high immunoglobulin (IgG and IgG2a) levels both in the serum and lung homogenates. A subsequent analysis of lung homogenates post-RSV challenge revealed high IgA, indicating the generation of a mucosal immune response upon intradermal immunization. A flowcytometry analysis showed high CD8+ and CD4+ expression in the lymph nodes and spleens of the F-VLP NP + MPL NP MN-immunized mice. Thus, our vaccine elicited a robust humoral and cellular immune response in vivo. Therefore, PLGA nanoparticles loaded in dissolving microneedles could be a suitable novel delivery system for RSV vaccines.

This study focused on developing an influenza vaccine delivered in polymeric nanoparticles (NPs) using dissolving microneedles. We first formulated an influenza extracellular matrix protein 2 virus-like particle (M2e VLP)-loaded with poly(lactic-co-glycolic) acid (PLGA) nanoparticles, yielding M2e5x VLP PLGA NPs. The vaccine particles were characterized for their physical properties and in vitro immunogenicity. Next, the M2e5x VLP PLGA NPs, along with the adjuvant Alhydrogel® and monophosphoryl lipid A® (MPL-A®) PLGA NPs, were loaded into fast-dissolving microneedles. The vaccine microneedle patches were then evaluated in vivo in a murine model. The results from this study demonstrated that the vaccine nanoparticles effectively stimulated antigen-presenting cells in vitro resulting in enhanced autophagy, nitric oxide, and antigen presentation. In mice, the vaccine elicited M2e-specific antibodies in both serum and lung supernatants (post-challenge) and induced significant expression of CD4+ and CD8+ populations in the lymph nodes and spleens of immunized mice. Hence, this study demonstrated that polymeric particulates for antigen and adjuvant encapsulation, delivered using fast-dissolving microneedles, significantly enhanced the immunogenicity of a conserved influenza antigen.

COVID-19 continues to cause an increase in the number of cases and deaths worldwide. Due to the ever-mutating nature of the virus, frequent vaccination against COVID-19 is anticipated. Most of the approved SARS-CoV-2 vaccines are administered using the conventional intramuscular route, causing vaccine hesitancy. Thus, there is a need for an effective, non-invasive vaccination strategy against COVID-19. This study evaluated the synergistic effects of a subunit microparticulate vaccine delivered using microneedles. The microparticles encapsulated a highly immunogenic subunit protein of the SARS-CoV-2 virus, such as the spike protein’s receptor binding domain (RBD). Adjuvants were also incorporated to enhance the spike RBD-specific immune response. Our vaccination study reveals that a microneedle-based vaccine delivering these microparticles induced spike RBD-specific IgM, IgG, IgG1, IgG2a, and IgA antibodies. The vaccine also generated high levels of CD4+ and CD8a+ molecules in the secondary lymphoid organs. Overall, dissolving microneedles delivery spike RBD antigen in microparticulate form induced a robust immune response, paving the way for an alternative self-administrable, non-invasive vaccination strategy against COVID-19.

There is an alarming rise in the number of gonorrhea cases worldwide. Neisseria gonorrhoeae, the bacteria that causes gonorrhea infection, has gradually developed antimicrobial resistance over the years. To date, there is no licensed vaccine for gonorrhea. This study investigates the in vivo immunogenicity of a whole-cell inactivated gonococci in a microparticle formulation (Gc-MP) along with adjuvant microparticles (Alhydrogel & REG;- Alum MP and AddaVaxTM MP) delivered transdermally using dissolving microneedles (MN). The proposed vaccine formulation (Gc-MP + Alum MP + AddaVaxTM MP) was assessed for induction of humoral, cellular, and protective immune responses in vivo. Our results show the induction of significant gonococcal-specific serum IgG, IgG1, IgG2a, and vaginal mucosal IgA antibodies in mice immunized with Gc-MP + Alum MP + AddaVaxTM MP and Gc-MP when compared to the control groups receiving blank MN or no treatment. The serum bactericidal assay revealed that the antibodies generated in mice after immunization with Gc-MP + Alum MP + AddaVaxTM MP were bactericidal towards live Neisseria gonorrhoeae. Gc-MP + Alum MP + AddaVaxTM MP and Gc-MPimmunized mice showed enhanced clearance rate of gonococcal bacterial infection post challenge. In contrast, the control groups did not begin to clear the infection until day 10. In addition, the mice which received Gc-MP + Alum MP + AddaVaxTM MP showed enhanced expression of cellular immunity markers CD4 and CD8 on the surface of T cells in the spleen and lymph nodes. Taken together, the data shows that microneedle immunization with whole-cell inactivated gonococci MP in mice induced humoral, cellular, and protective immunity against gonococcal infection.

This ‘proof-of-concept’ study aimed to test the microparticulate vaccine delivery system and a transdermal vaccine administration strategy using dissolving microneedles (MN). For this purpose, we formulated poly(lactic-co-glycolic) acid (PLGA) microparticles (MP) encapsulating the inactivated canine coronavirus (iCCoV), as a model antigen, along with adjuvant MP encapsulating Alhydrogel® and AddaVax. We characterized the vaccine MP for size, surface charge, morphology, and encapsulation efficiency. Further, we evaluated the in vitro immunogenicity, cytotoxicity, and antigen-presentation of vaccine/adjuvant MP in murine dendritic cells (DCs). Additionally, we tested the in vivo immunogenicity of the MP vaccine in mice through MN administration. We evaluated the serum IgG, IgA, IgG1, and IgG2a responses using an enzyme-linked immunosorbent assay. The results indicate that the particulate form of the vaccine is more immunogenic than the antigen suspension in vitro. We found the vaccine/adjuvant MP to be non-cytotoxic to DCs. The expression of antigen-presenting molecules, MHC I/II, and their costimulatory molecules, CD80/40, increased with the addition of the adjuvants. Moreover, the results suggest that the MP vaccine is cross presented by the DCs. In vivo, the adjuvanted MP vaccine induced increased antibody levels in mice following vaccination and will further be assessed for its cell-mediated responses.

Despite the detrimental effects associated with Zika infection, there are no approved treatments or vaccines available. To address the need for a safe and effective vaccine for Zika, we formulated poly(lactic-co-glycolic) acid (PLGA) polymeric vaccine microparticles (MP) encapsulating the inactivated Zika virus, along with adjuvant MP encapsulating Alhydrogel® and MPL-A®. We characterized the vaccine MP for size, surface charge, morphology, encapsulation efficiency, and antigen integrity. Further, we evaluated immunogenicity and cytotoxicity of vaccine MP in vitro in murine dendritic cells. Vaccine MP with adjuvants induced significantly higher production of nitric oxide, a marker of innate immunity, when compared to the untreated cells. In addition, vaccine MP with or without adjuvants induced increased autophagy in murine dendritic cells when compared to inactivated Zika virus, which is critical in antigen presentation. Next, we evaluated in vivo efficacy of vaccine MP with and without adjuvants in a preclinical murine model by measuring the immune response after intramuscular administration. Vaccine MP with adjuvants induced significant IgG, Ig2a, and IgG1 titers as compared to the control group of untreated mice. Thus, this study provided the 'proof-of-concept' for a microparticulate Zika vaccine.

Effective vaccines delivered via painless methods would revolutionize the way people approach vaccinations. This study focused on the development of fast-dissolving microneedles (MNs) to deliver antigen-loaded sustained release polymeric nanoparticles (NPs), achieving a dual-delivery platform for vaccination through the skin. The platform utilizes dissolving MNs (dMNs), which penetrate to the epidermal layer of the skin and rapidly dissolve, releasing the antigen-loaded NPs. In this study, seven dissolving microneedle formulations were tested based on screening of various biocompatible and biodegradable polymers and sugars. The lead dMN formulation was selected based on optimal mechanical strength and dissolution of the needles and was loaded with poly(lactic-co-glycolic) acid (PLGA) NPs encapsulating a model influenza matrix 2 (M2) protein antigen. Antigen-loading efficiency in the needles was determined by centrifugation of the lead formulation containing various concentrations of antigen nanoparticles. Next, the reproducibility and translatability of ex vivo mechanical strength and dissolvability of the lead M2 PLGA NP-loaded dMN formulation was assessed by formulating and testing two different microneedle arrays on murine and porcine skin. Finally, the lead microneedle array was loaded with fluorescent dye NPs and evaluated for pore formation and closure in vivo in a murine model. This proof-of-concept study yielded an easy-to-formulate, well-characterized, translatable antigen NP-loaded dMN platform for transdermal vaccine administration.