Within the ESA PLATO M3 mission, the Telescope Optical Unit (TOU), i.e. the opto-mechanical unit, is a fully refractive optical system. The 26 TOU Flight Models (FM) to be delivered to the upper level, the PLATO Camera, make it a series production. The first Flight Models production faced many initial challenges from a Product Assurance point of view, mostly related to MAIT activities, while moving forward these challenges decreased. Discrepancies and non-conformities associated with, mainly, but not only, materials and processes, cleanliness and contamination control, safety, qualifications and validations, are the object of this proceeding. Thus, showing that serial production adds one more variable to possible failures, but at the same time, when root causes are corrected and solved, yields less difficulties in subsequent FMs MAIT and final production. Product Assurance, in monitoring the product in failure-proofing aspects, aims at mitigating criticalities and arranging for corrective and preventive actions that allow improving the likelihood of success of the mission.

The ESA M size mission PLATO (PLAnetary Transits and Oscillation of stars) is planned to be launched in the 2026, with the aim of discover exoplanets that will be characterized with unprecedented precision. The optical elements of PLATO are 26 small telescopes, the TOUs (Telescope Optical Units), that using partially overlapping Fields of View will permit instantaneous sky coverage larger than 2100 square degrees. Each TOU has an aperture of 120 mm diameter assured by an internal stop, and it is composed by 6 lenses, the frontal one having an aspherical surface and the last acting as field flattener. The mechanical structure is realized mainly in AlBeMet. We here describe the optical design, summarizing several optical properties (materials, coatings, etc.), and report on nominal performances of the TOU system.

The TOU is the Telescope Optical Unit for the PLATO ESA mission, consisting of the opto-mechanical unit for each of the 26 Cameras of which PLATO is composed. The TOU is currently in the manufacturing, assembly, integration and testing (MAIT) phase for the Proto Flight Model (PFM) and for Flight Models (FMs). We present the design processes as seen from the Product Assurance (PA) point of view: PA aims at monitoring the design and addresses specific issues related to, among others, materials and processes (these shall be suitable for the purpose and for the life-time of the mission), cleanliness and contamination control (to limit the loss of optical performance), safety, monitoring of qualifications/validations. PA supports the project in failure-proofing aspects to mitigate criticalities, e.g. in the elaboration of non-conformances and deviations that can arise during the design and MAIT process, and/or are highlighted during the reviews for manufacturing, test, and delivery of the related hardware. PA ensures early detection of potential problems and risks for the TOU and arranges for corrective actions that aim at improving the likelihood of success of the mission.

We describe the main tasks of the Product Assurance process for the Telescope Optical Unit (TOU) of the ESA PLATO mission, that starts from the design phase and proceeds through all phases, up to the final product, with the aim of improving the likelihood of success of the mission. When dealing with the opto-mechanical components of the TOU, several aspects regarding safety and performance have to be analyzed and tracked. From the PA point of view, we focus in this paper on materials and processes selection that shall be suitable and robust enough for the space environment. Cleanliness and contamination control is needed to overcome loss of optical performance. Validations and qualifications on prototypes is fundamental to assess the reliability of the instrument for its purpose and for the lifetime of the mission.

The presentation slides for “CHEOPS Mission Overview” are available at http://doi.org/10.1117/12.2536048 , under the Supplemental Content tab.

The presentation slides for “Small Optics for Space Science: Roundtable” are available at http://doi.org/10.1117/12.2536049, under the Supplemental Content tab.

PLATO (PLAnetary Transits and Oscillation of stars) is the ESA Medium size dedicated to exo-planets discovery, adopted in the framework of the Cosmic Vision program. The PLATO launch is planned in 2026 and the mission will last at least 4 years in the Lagrangian point L2. The primary scientific goal of PLATO is to discover and characterize a large amount of exo-planets hosted by bright nearby stars, constraining with unprecedented precision their radii by mean of transits technique and the age of the stars through by asteroseismology. By coupling the radius information with the mass knowledge, provided by a dedicated ground-based spectroscopy radial velocity measurements campaign, it would be possible to determine the planet density. Ultimately, PLATO will deliver the largest samples ever of well characterized exo-planets, discriminating among their ‘zoology’. The large amount of required bright stars can be achieved by a relatively small aperture telescope (about 1 meter class) with a wide Field of View (about 1000 square degrees). The PLATO strategy is to split the collecting area into 24 identical 120 mm aperture diameter fully refractive cameras with partially overlapped Field of View delivering an overall instantaneous sky covered area of about 2232 square degrees. The opto-mechanical sub-system of each camera, namely Telescope Optical Unit, is basically composed by a 6 lenses fully refractive optical system, presenting one aspheric surface on the front lens, and by a mechanical structure made in AlBeMet.

CHEOPS is the first small class mission adopted by ESA in the framework of the Cosmic Vision 2015-2025. Its launch is foreseen in early 2019. CHEOPS aims to get transits follow-up measurements of already known exo-planets, hosted by near bright stars (V<12). Thanks to its ultra-high precision photometry, CHEOPS science goal is accurately measure the radii of planets in the super-Earth to Neptune mass range (1<Mplanet/MEarth<20). The knowledge of the radius by transit measurements, combined with the determination of planet mass through radial velocity techniques, will allow the determination/refinement of the bulk density for a large number of small planets during the scheduled 3.5 years life mission. The instrument is mainly composed of a 320 mm aperture diameter Ritchey-Chretien telescope and a Back End Optics, delivering a de-focused star image onto the focal plane. In this paper we describe the opto-thermo-mechanical model of the instrument and the measurements obtained during the opto-mechanical integration and alignment phase at Leonardo company premises, highlighting the level of congruence between the predictions and measurements.

Spreading the PSF over a quite large amount of pixels is an increasingly used observing technique in order to reach extremely precise photometry, such as in the case of exoplanets searching and characterization via transits observations. A PSF top-hat profile helps to minimize the errors contribution due to the uncertainty on the knowledge of the detector flat field. This work has been carried out during the recent design study in the framework of the ESA small mission CHEOPS. Because of lack of perfect flat-fielding information, in the CHEOPS optics it is required to spread the light of a source into a well defined angular area, in a manner as uniform as possible. Furthermore this should be accomplished still retaining the features of a true focal plane onto the detector. In this way, for instance, the angular displacement on the focal plane is fully retained and in case of several stars in a field these look as separated as their distance is larger than the spreading size. An obvious way is to apply a defocus, while the presence of an intermediate pupil plane in the Back End Optics makes attractive to introduce here an optical device that is able to spread the light in a well defined manner, still retaining the direction of the chief ray hitting it. This can be accomplished through an holographic diffuser or through a lenslet array. Both techniques implement the concept of segmenting the pupil into several sub-zones where light is spread to a well defined angle. We present experimental results on how to deliver such PSF profile by mean of holographic diffuser and lenslet array. Both the devices are located in an intermediate pupil plane of a properly scaled laboratory setup mimicking the CHEOPS optical design configuration.

The CHaracterizing ExOPlanet Satellite (CHEOPS) is an ESA Small Mission whose launch is planned for the end of 2017. It is a Ritchey-Chretien telescope with a 320 mm aperture providing a FoV of 0.32 degrees, which will target nearby bright stars already known to host planets, and measure, through ultrahigh precision photometry, the radius of exo-planets, allowing to determine their composition. This paper will present the details of the AIV plan for a demonstration model of the CHEOPS Telescope with equivalent structure but different CTEs. Alignment procedures, needed GSEs and devised verification tests will be described and a path for the AIV of the flight model, which will take place at industries premises, will be sketched.

Since the European Space Agency (ESA) geostationary data-relay satellite ARTEMIS started its operation in February 2003, ESA and the Instituto de Astrofisica de Canarias (IAC) have carried out routinely bidirectional optical link experiments between ARTEMIS and the Optical Ground Station (OGS), installed in the Teide Observatory of the IAC in the Canary Islands, Spain. The experiments aimed at characterizing statically and dynamically the performance of the optical downlinks and uplinks in different atmospheric turbulence conditions, together with the development and testing of appropriate theoretical models to predict the link performance. An overview of the OGS and additional facilities on top the IAC Teide Observatory is given, as well as a summary of the statistical results on propagation and communication for different experimental configurations, including different number of transmitting subapertures and divergence in the uplink. Key parameters, like scintillation and fade and surge statistics, are correlated with theoretical predictions and an analysis of the far field pattern is included. The results of the deep space uplink experiments between the OGS and ESA satellite SMART-1 are also presented. Finally ESA free space optical communication programs are summarised, including optical payloads on board different satellites.