A novel bipolar electrode (BPE)-electrochemiluminescence (ECL) device was constructed for the ultra-sensitive detection of Staphylococcus aureus (S. aureus) by combining polymerase chain reaction (PCR) amplification and DNA network-loaded polymethylene blue nanoparticles (pMB NPs). The presence of target triggered the dissociation of double-stranded DNA on Fe3O4 NPs and the release of T strand, which initiated the PCR. The PCR product contains two protruding single-stranded DNA fragments that serve as bridges to connect Au NPs labeled probes. The PCR-Au products were captured by the probes on cathode of BPE to form three-dimensional DNA networks, which offer multiple adsorption sites for pMB NPs, leading to the remarkable enhancement of ECL intensity. Under optimal circumstances, a wide linear range from 10 to 108 CFU/mL and a low detection limit of 0.78 CFU/mL were achieved. This research opens new horizons for the application of PCR-based biosensors for the accurate and sensitive measurement of pathogenic bacteria.

Peroxynitrite (ONOO−) has been revealed to play crucial roles in many physiological and pathological processes, and many diseases were proven to be associated with its misregulated production. The development of fluorescent probes meets the need for tracking ONOO− and gives a better understanding of its diverse mechanisms. In this work, a red-emitting fluorescent probe BP-ONOO was synthesized via functionalization of the rhodol-like fluorophore with a reactive site of hydrazide. The probe BP-ONOO exhibited high sensitivity, excellent selectivity, and short response time (less than 4 s) towards ONOO− under neutral or weak alkaline conditions. These attractive properties favor its application in real-time imaging of ONOO− in living cells, and the probe has been successfully applied for imaging the concentration levels of ONOO− in RAW 264.7 macrophage cells under drug stimulation.

Fumonisin B1 (FB1) is a toxin produced by the metabolism of Fusarium oxysporum, which can cause serious effects on the nervous, respiratory, digestive, and reproductive systems of humans or animals; it is known as one of the highly toxic epidemic contaminants. Herein, we report the visual inspection of FB1 using bipolar electrodes (BPEs) with an array-based electrochemiluminescence (ECL) platform. The sensor consists of a PDMS cover and a glass substrate containing an array of 10 ITO electrodes. A specific sensing interface was constructed on the cathode of the BPE, which could modulate the ECL reactions that occurred at the anode of BPEs. To amplify the ECL signal, methylene blue (MB)-encapsulated Zr-MOFs (MB@Zr-MOFs) were synthesized and immobilized on the cathode of the BPE, which could amplify the ECL signal at the anode. By coupling the cyclic amplification effect of the DNA walker and nicking endonuclease (Nb.BbvCI), the biosensor can realize the visual measurement of FB1 in the range of 5 × 10−5~0.5 ng/mL. In addition, the developed biosensor was used to monitor the concentration of FB1 in maize and peanut samples. The recoveries were in the range of 99.2%~110.6%, which demonstrated the good accuracy of the designed BPE-ECL biosensor for FB1 assay in food samples.

Rapid and efficient detection of mycotoxins is of great significance in the field of food safety. In this review, several traditional and commercial detection methods are introduced, such as high-performance liquid chromatography (HPLC), liquid chromatography/mass spectrometry (LC/MS), enzyme-linked immunosorbent assay (ELISA), test strips, etc. Electrochemiluminescence (ECL) biosensors have the advantages of high sensitivity and specificity. The use of ECL biosensors for mycotoxins detection has attracted great attention. According to the recognition mechanisms, ECL biosensors are mainly divided into antibody-based, aptamer-based, and molecular imprinting techniques. In this review, we focus on the recent effects towards the designation of diverse ECL biosensors in mycotoxins assay, mainly including their amplification strategies and working mechanism.

A novel portable and disposable bipolar electrode (BPE)-electrochemiluminescence (ECL) device was fabricated for fumonisin B1 (FB1) detection. BPE was fabricated by using MWCNTs and polydimethylsiloxane (PDMS) due to their excellent electrical conductivity and good mechanical stiffness. After the deposition of Au NPs on the cathode of BPE, the ECL signal could be improved 89-fold. Then a specific aptamer-based sensing strategy was constructed by grafting capture DNA on Au surface, followed by hybridizing with aptamer. Meanwhile, an excellent catalyst, Ag NPs was labeled on aptamer to activate oxygen reduction reaction, leading to a 13.8-fold enhancement in ECL signal at the anode of BPE. Under the optimal conditions, the biosensor exhibited a wide linear range of 0.10 pg/mL to 10 ng/mL for FB1 detection. Meanwhile, it demonstrated satisfactory recoveries for real sample detection with good selectivity, making it to be a convenient and sensitive device for mycotoxin assay.

Over the past decades, the development of novel catalysts on the degradation of organic pollutants has attracted increasing attention. In this work, we synthesized silver decorated magnetic nanoparticles (Fe3O4@PDA/Ag NPs) to activate H2O2 for organic pollutants removal via advanced oxidation processes (AOPs). The catalyst was prepared through in-situ reduction of AgNO3 by the polydopamine (PDA) layer on Fe3O4 NPs. Chemiluminescence results obtained from luminol/H2O2 system revealed that the catalyst exhibited excellent catalytic effect on the decomposition of H2O2 into reactive oxygen species (ROS) and superoxide radical (O2-) was mainly responsible for the oxidative degradation. Importantly, the fast evolution frequency of oxygen gas bubbles produced in the reaction of Ag NPs and H2O2 could generate vigorous fluid convection and autonomous motion of catalyst when H2O2 concentration reached 1%. Additionally, the catalyst can suspend in solution for several minutes. Therefore, by coupling the vigorous motion with slow sedimentation velocity, the catalyst can realize rapid degradation of organic pollutants without external mixing force. The Fe3O4@PDA/Ag NPs catalysts not only showed a high removal efficiency of malachite green, but also can be applied for the degradation of other dyes, making it to be a promise candidate for environmental remediation. With the merits of excellent catalytic effect, fast degradation speed, and simplicity of operation, the prepared catalysts exhibits great potential in the practical field.

A novel buoyant force-propelled micromotor is designed by decorating bimetallic catalysts (Ag and Pt NPs) on glassy carbon bead matrix for high efficient removal of organic pollutant via advanced oxidation processes. The micromotor floats to the top of solution when enough number of bubbles are accumulated on its surface and then sinks to the bottom after the evolution of bubbles. Owing to the excellent catalytic effect of Ag and Pt NPs, oxygen bubble generation and evolution frequencies are improved, leading to the ultra-fast movement of micromotor in H2O2 solution with a long lifetime of 6 h and a highest speed of ca. 12 mm/s. Meanwhile, active radical species are produced in the reaction of Ag NPs and H2O2. As a result, the synergy effect of vigorous intermixing and peroxidase mimics activity of Ag NPs speeds up the degradation significantly. In order to improve the decontamination efficiency, key factors that affect the motion performance and the generation of ROS, including H2O2, sodium dodecyl sulfate, buffer solution and the amount of micromotors, are discussed using response surface methodology. Taking methylene blue (MB) as pollutant model, the degradation rate increased from 32.47% to 90.42% after the deposition of Pt NPs on Ag micromotor, indicating the excellent catalytic effect of the bimetallic catalysts modified micromotor. Possible degradation pathway of MB was proposed, based on the results of quantum chemistry calculation and LC/MS analysis. Overall, the ultra-high traveling speed and the excellent catalytic effect make it to be a promise candidate for environmental remediation.