The workshop focused on the application of ANAs to particle physics keeping in mind the ultimate goal of a collider at the energy frontier (10 TeV, e^+/e^-, e^-/e^-, or γγ). The development of ANAs is conducted at universities and national laboratories worldwide. The community is thematically broad and diverse, in particular since lasers suitable for ANA research (multi-hundred-terawatt peak power, a few tens of femtosecond-long pulses) and acceleration of electrons to hundreds of mega electron volts to multi giga electron volts became commercially available. The community spans several continents (Europe, America, Asia), including more than 62 laboratories in more than 20 countries. It is among the missions of the ICFA-ANA panel to feature the amazing progress made with ANAs, to provide international coordination and to foster international collaborations towards a future HEP collider. The scope of this edition of the workshop was to discuss the recent progress and necessary steps towards realizing a linear collider for particle physics based on novel-accelerator technologies (laser or beam driven in plasma or structures). Updates on the relevant aspects of the European Strategy for Particle Physics (ESPP) Roadmap Process as well as of the P5 (in the US) were presented, and ample time was dedicated to discussions. The major outcome of the workshop is the decision for ALEGRO to coordinate efforts in Europe, in the US, and in Asia towards a pre-CDR for an ANA-based, 10 TeV CM collider. This goal of this coordination is to lead to a funding proposal to be submitted to both EU and EU/US funding agencies. This document presents a summary of the workshop, as seen by the co-chairs, as well as short 'one-pagers' written by the presenters at the workshop.

Applications of laser-plasma accelerators (LPA) require independent control of electron beam parameters. However, due to the complex coupling of the many variables governing the laser-plasma interaction, precisely tuning these parameters based on simple scalings is often impossible or at least suboptimal. Here, we apply multiobjective Bayesian optimization to derive optimal tuning curves for LPAs, both in simulations and experiments. For electron energies between 150 and 250 MeV, we demonstrate tuning of the charge over a range of nearly 100 pC, while preserving optimal beam loading conditions with energy spreads below 5%. The derived tuning curves can explain the sometimes counterintuitive interplay between laser and plasma control variables that is necessary to find the best trade-off between competing beam properties.

Laser-plasma accelerators are capable of sustaining accelerating fields of 10–100 GeV/m, 100–1000 times that of conventional technology and the highest fields produced by any of the widely researched advanced accelerator concepts. Laser-plasma accelerators also intrinsically accelerate short particle bunches, several orders of magnitude shorter than that of conventional technology, which leads to reductions in beamstrahlung and, hence, savings in the overall power consumption to reach a desired luminosity. These properties make laser-plasma accelerators a promising accelerator technology for a more compact, less expensive high-energy linear collider providing multi-TeV polarized leptons. In this submission to the Snowmass 2021 Accelerator Frontier, we discuss the motivation for a laser-plasma-accelerator-based linear collider, the status of the field, and potential linear collider concepts up to 15 TeV. We outline the research and development path toward a collider based on laser-plasma accelerator technology, and highlight near-term and mid-term applications of this technology on the collider development path. The required experimental facilities to carry out this research are described. We conclude with community recommendations developed during Snowmass.

Over the last decades, significant advances in high-power laser systems have enabled rapid progress in the development of laser-driven plasma accelerators. Today, the results obtained in beam stability and reproducibility present laser plasma acceleration as a viable and promising alternative to conventional accelerators. As several electron beam and secondary sources applications require high average currents, a major focus is now on increasing the beam's repetition rate. In the following, we introduce a novel plasma source for kHz electron acceleration, providing a continuous and spatially confined gas flow, while minimising the gas load in the acceleration chamber.

The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.

White paper to the Proceedings of the U.S. Particle Physics Community Planning Exercise (Snowmass 2021): Linear colliders based on laser-plasma accelerators

Laser-plasma accelerators outperform current radio frequency technology in acceleration strength by orders of magnitude. Yet, enabling them to deliver competitive beam quality for demanding applications, particularly in terms of energy spread and stability, remains a major challenge. In this Letter, we propose to combine bunch decompression and active plasma dechirping for drastically improving the energy profile and stability of beams from laser-plasma accelerators. Realistic start-to-end simulations demonstrate the potential of these postacceleration phase-space manipulations for simultaneously reducing an initial energy spread and energy jitter of ∼1-2% to ≲0.1%, closing the beam-quality gap to conventional acceleration schemes.

The petawatt (PW) laser facility of the Berkeley Lab Laser Accelerator (BELLA) Center has recently commissioned its second laser pulse transport line. This new beamline can be operated in parallel with the first beamline and enables strong-field quantum electrodynamics (SF-QED) experiments at BELLA. In this paper, we present an overview of the upgraded BELLA PW facility with a SF-QED experimental layout in which intense laser pulses collide with GeV-class laser-wakefield-accelerated electron beams. We present simulation results showing that experiments will allow the study of laser-particle interactions from the classical to the SF-QED regime with a nonlinear quantum parameter of up to χ∼ 2. In addition, we show that experiments will enable the study and production of GeV-class, mrad-divergence positron beams via the Breit–Wheeler process.

Figure 20.1 was not correct in the published article. The original article has been corrected. The published apologizes for the inconvenience.

We describe the development and operation of a regenerative, cryogenically-formed discharge waveguide formed by freezing nitrous oxide gas onto the inner wall of a sapphire capillary. We demonstrate a technique for varying the channel diameter in situ and present guiding of low-power laser pulses through 6-cm long waveguides with channel diameters of 0.7, 0.8, and 1 mm. Measurements and simulations of the output laser fluence showed that the matched spot size could be adjusted with the thickness of the solid nitrous oxide layer.

A. Zingale , N. Czapla, D. M. Nasir, S. K. Barber, J. H. Bin, A. J. Gonsalves, F. Isono, J. van Tilborg, S. Steinke, K. Nakamura , G. E. Cochran, J. Purcell , W. P. Leemans,2∥ C. G. R. Geddes, C. B. Schroeder, E. Esarey, and D.W. Schumacher The Ohio State University, Columbus, Ohio 43210, USA Lawrence Berkeley National Laboratory, Berkeley, California 94720, USA Lawrence Livermore National Laboratory, 7000 East Ave, Livermore, California 94550, USA

We propose a short period undulator based on the electromagnetic field pattern in a THz-driven split ring resonator structure. An analytical model is developed that allows us to assess the key performance parameters of the undulator and to estimate the emitted radiation spectrum. Different geometric configurations are compared in detail using numerical simulations. A 100 MeV electron bunch with 5 pC charge is shown to emit narrow band 83 eV photon pulses with a peak brightness of approximately 10(19) photons/(s mrad(2) mm(2) 0.1% BW) when passing through the 100 mm long undulator with a 1 mm period.

This report presents the conceptual design of a new European research infrastructure EuPRAXIA. The concept has been established over the last four years in a unique collaboration of 41 laboratories within a Horizon 2020 design study funded by the European Union. EuPRAXIA is the first European project that develops a dedicated particle accelerator research infrastructure based on novel plasma acceleration concepts and laser technology. It focuses on the development of electron accelerators and underlying technologies, their user communities, and the exploitation of existing accelerator infrastructures in Europe. EuPRAXIA has involved, amongst others, the international laser community and industry to build links and bridges with accelerator science - through realising synergies, identifying disruptive ideas, innovating, and fostering knowledge exchange. The Eu-PRAXIA project aims at the construction of an innovative electron accelerator using laser- and electron-beam-driven plasma wakefield acceleration that offers a significant reduction in size and possible savings in cost over current state-of-the-art radiofrequency-based accelerators. The foreseen electron energy range of one to five gigaelectronvolts (GeV) and its performance goals will enable versatile applications in various domains, e.g. as a compact free-electron laser (FEL), compact sources for medical imaging and positron generation, table-top test beams for particle detectors, as well as deeply penetrating X-ray and gamma-ray sources for material testing. EuPRAXIA is designed to be the required stepping stone to possible future plasma-based facilities, such as linear colliders at the high-energy physics (HEP) energy frontier. Consistent with a high-confidence approach, the project includes measures to retire risk by establishing scaled technology demonstrators. This report includes preliminary models for project implementation, cost and schedule that would allow operation of the full Eu-PRAXIA facility within 8-10 years.

The plasma channel formation in the focus of a knife-like nanosecond laser pulse irradiating a gas target is studied theoretically, and in gas-dynamics computer simulations. The distribution of the electromagnetic field in the focus region, obtained analytically, is used to calculate the energy deposition in the plasma, which then is implemented in the magnetohydrodynamic computer code. The modelling of the channel evolution shows that the plasma profile, which can guide the laser pulse, is formed by the tightly focused short knife-like lasers. The results of the simulations show that a proper choice of the convergence angle of a knife-like laser beam (determined by the focal length of the last cylindrical lens), and laser pulse duration may provide a sufficient degree of azimuthal symmetry of the formed plasma channel.

Laser-heated capillary discharge waveguides are novel, low plasma density guiding structures able to guide intense laser pulses over many diffraction lengths and have recently enabled the acceleration of electrons to 7.8GeV by using a laser-plasma accelerator (LPA). These devices represent an improvement over conventional capillary discharge waveguides, as the channel matched spot size and plasma density can be tuned independently of the capillary radius. This has allowed the guiding of petawatt-scale pulses focused to small spot sizes within large diameter capillaries, preventing laser damage of the capillary structure. High performance channel-guided LPAs require control of matched spot size and density, which experiments and simulations reported here show can be tuned over a wide range via initial discharge and laser parameters. In this paper, measurements of the matched spot size and plasma density in laser-heated capillary discharges are presented, which are found to be in excellent agreement with simulations performed using the MHD code MARPLE. Strategies for optimizing accelerator performance are identified based on these results.

Detailed and reliable numerical modeling of laser-plasma accelerators ( LPAs ) , where a short and intense laser pulse interacts with an underdense plasma over distances of up to a meter, is a formidably challenging task. This is due to the great disparity among the length scales involved in the modeling, ranging from the micron scale of the laser wavelength to the meter scale of the total laser-plasma interaction length. The use of the time-averaged ponderomotive force approximation, where the laser pulse is described by means of its envelope, enables ef fi cient modeling of LPAs by removing the need to model the details of electron motion at the laser wavelength scale. Furthermore, it allows simulations in cylindrical geometry which captures relevant 3D physics at 2D computational cost. A key element of any code based on the time-averaged ponderomotive force approximation is the laser envelope solver. In this paper we present the accurate and ef fi cient envelope solver used in the code INF&RNO ( INtegrated Fluid & paRticle simulatioN cOde ) . The features of the INF&RNO laser solver enable an accurate description of the laser pulse evolution deep into depletion even at a reasonably low resolution, resulting in signi fi cant computational speed-ups.

We present a study of laser-ion acceleration, where an increased laser spot size leads to sheath field geometries that accelerate ion beams of narrow and achromatic divergence at unprecedented charge densities, resulting from the high aspect ratio of the laser spot size to the acceleration distance. Matching the laser pulse length to the transverse laser spot size mitigated laser sweeping across the target front side and optimized the acceleration, with maximum energies deviating significantly from a linear intensity scaling.

High-resolution (sub-%), single-shot energy distribution, and emittance measurements of GeV-class electron beams generated by laser plasma accelerators (LPAs) have been enabled through the use of an active plasma lens combined with relatively short dipole magnets. This setup, with only 60 cm between the LPA source and the final diagnostic screen, was facilitated through the use of a replenishable ∼20–40 nm thick liquid crystal plasma mirror to separate remnant laser radiation from the electron beam without emittance degradation. As LPAs capable of generating GeV-class electron beams at cm-scale distances become increasingly ubiquitous, there is a need to supplement these compact accelerators with equally compact diagnostics.