In this article, the authors propose and investigate a new concept of HAPS aerostat design in a modular form, which allows for sequential increasing or decreasing of the total volume, up to the desired size. In its initial form, the aerostat has relatively small dimensions but its central cylindrical part is multi-segmented and can be easily extended. The application of controllable construction couplings enables precise control of the aerostat expansion process and significantly improves its vertical mobility. The paper describes details of telescopic aerostat construction, presents a mathematical model of its vertical motion and investigates numerically two volume control strategies aimed at maximization of operation efficiency and minimization of operation cost. The results obtained reveal the main problems that have to be addressed and the factors that play a key role in design of such telescopic aerostats and control of their vertical mobility.

Small drones with total mass of a few kilograms are becoming more and more popular in many applications increasing the probability of occurrence of emergency situations caused by an equipment failure or a human error. In case of a fall from a high altitude very often it is possible to use parachute rescue systems, which however require relatively long time for deployment and development of braking forces. The touchdown velocity may be large enough to exceed limit accelerations for UAV equipment. The paper presents the concept of deployable airbag systems, in particular with adaptive flow control, which provides a possible solution to the above-mentioned problems. The paper discusses the overall control and adaptation strategy. Simplified methods for mathematical modeling are proposed and formulated for an example on a cylindrical airbag. The conceptual part is concluded with the presentation of the methodology of experimental verification and results of initial tests of the integrated airbag system.

Aircraft landing gears are subjected to a wide range of excitation conditions, which result in conflicting damping requirements. A novel solution to this problem is to implement semi-active damping using magnetorheological (MR) fluids. This paper presents a design methodology that enables an MR landing gear to be optimized, both in terms of its damping and magnetic circuit performance, whilst adhering to stringent packaging constraints. Such constraints are vital in landing gear, if MR technology is to be considered as feasible in commercial applications. The design approach focuses on the impact or landing phase of an aircraft’s flight, where large variations in sink speed, angle of attack and aircraft mass makes an MR device potentially very attractive. In this study, an equivalent MR model of an existing aircraft landing gear is developed. This includes a dynamic model of an MR shock strut, which accounts for the effects of fluid compressibility. This is important in impulsive loading applications such as landing gear, as fluid compression will reduce device controllability. Using the model, numerical impact simulations are performed to illustrate the performance of the optimized MR shock strut, and hence the effectiveness of the proposed design methodology. Part 2 of this contribution focuses on experimental validation.

Aircraft landing gears are subjected to wide ranging excitation conditions during touchdown, which results in conflicting damping requirements. This is due to the unpredictable and large variations in an aircraft's mass and sink velocity, which serves to increase passenger discomfort and reduce the structural fatigue life. A. novel solution to this problem is to implement semi-active damping using magnetorheological (MR) fluids.In this paper, an MR landing gear sizing methodology is described, which enables an effective assessment of feasibility to be made for many aircraft. Essentially, the methodology alms to maximise the range of landing impacts that can be optimally damped, whilst adhering to the stringent packaging constraints of conventional devices. This methodology is demonstrated by performing feasibility studies for a variety of aircraft, ranging from small-scale utility aircraft to large-scale commercial Jets.

The paper presents a new way of hyperelastic materials specimens testing. For some time now Finite Element Method (FEM) Software allows to calculate stress in this kind of materials which make an engineering work easier. Unfortunately the results of the classical hyperelastic materials tests done so far do not give a possibility to use full abilities of FEM software. Furthermore, the attempts of conversion of classical type of data to FEM expected ones, do not lead to a correct solution. Such input data are accepted by software, but not physically correct. The specimens used for new types of elastomer tests are completely different, they are of different shape, they have to be hold and measured in a different way. These differences are described in the paper.

Magnetorheological (MR) fluids provide a novel solution to adapt damping levels in aircraft landing gear, so that optimal performance can be achieved over a wide range of conditions. The present study helps to demonstrate the feasibility of this solution by sizing an MR valve within the constraints of an existing commercial (passive) oleopneumatic shock strut. Previous work on MR landing gear has tended to focus on potential control strategies rather than design and sizing issues. However these latter aspects are of great importance in aircraft systems, where space and weight are vital design constraints. To aid the sizing analysis performed in this study, accurate quasi-steady and dynamic impact models of passive and MR oleopneumatic landing gears are developed. The model is validated against experimental data incorporating the passive device, which is then used as a benchmark for the MR designs and to assess fail safety. The dynamic model is particularly important as it incorporates fluid compressibility, which may be a significant contributor to the overall response of the device in an impact scenario. The present study also aims to give further insight into high velocity MR valve flow, which will be inevitable during impulsive loading. This area remains largely unexplored and particular importance is given to valve Reynolds number since turbulent values are known to reduce device performance. The feasibility of an MR landing gear will be largely dependant on these factors.