Chemical mechanical planarization of patterned InP in shallow trench isolation (STI) template structures using hydrogen peroxide-based silica slurries containing oxalic acid or citric acid

The fabrication of an InGaAs n-channel in complementary metal oxide semiconductors (CMOS) requires an intervening layer of Indium Phosphide (InP) that should be planarized using chemical mechanical planarization (CMP) before deposition of the InGaAs layer. The InP CMP process has to provide good InP removal rates (RRs) (100-200nmmin^-^1), very low oxide loss, low dishing and minimal or no phosphine evolution. In this work, it is shown that aqueous slurries containing 3wt% silica, 1wt% hydrogen peroxide and 0.08M oxalic acid or citric acid satisfy these requirements. Cross-sectional scanning electron microscope (SEM) images showed that InP in the shallow trench isolation structures was planarized and scratches, slurry particles and smearing of InP on the wafers were absent. Additionally, wafers polished at pH 6 showed very low dishing values of about 12-15nm, determined by cross-sectional SEM.