A finite element framework has been developed to explore the nonlinear dynamic instability exhibited by stiffened plates subjected to in-plane harmonic edge loading. In this framework, an eight-noded isoparametric degenerated shell element is used to model plate skin, while a three-noded curved beam element is employed to model the stiffener. The formulation of system matrices for both the plate skin and the stiffener is based on the Green-Lagrange strain displacement relationship, using the total Lagrangian approach. The Bolotin method is then applied to identify the region of linear dynamic instability. The Incremental Harmonic Balance (IHB) method is utilized to investigate the nonlinear frequency response of stiffened plates.
Increased load demand necessitates the strengthening of structural members to withstand the unanticipated loads during their service life. This study focuses on improving the axial performance of cold-formed steel (CFS) lipped angles under axial compression through strengthening, which otherwise are prone to local and global instabilities. Fiber-reinforced composites possess a high strength-weight ratio and, hence, are widely adopted for structural strengthening. This research aims to assess the axial performance of CFS lipped angle (equal-leg) columns strengthened with carbon fiber reinforced polymer (CFRP). The influence of uni-directional (UD) CFRP on the axial capacity of 0.5 m length lipped angle, considering both 0° (CF_UD-0°) and 90° (CF_UD-90°) strengthening configurations was investigated. The findings demonstrate that CF_UD-0° resulted in 31
Recently, a 3D printed polyvinylidene (PVDF) based composite sensor has been developed for the online health monitoring of bovine (post-operative diaphragmatic hernia (DH) surgery) at a lab scale. However, little has been reported on the in vitro analysis and tuneability of the PVDF composite-based radio-frequency (R-F) sensor on an actual bovine diaphragm (post-implantation). This study focuses on the in vitro analysis of a 3D-printed PVDF composite to assess the implant’s suitability as a DH sensor, with a fabrication strategy and tunability features for real-time health monitoring of the bovine diaphragm (post-surgery). The sensor was designed and simulated to target the average diameter of the hernia ring (75–150 mm) observed in adult milk buffaloes. Essential parameters for implantable applications (specific absorption rate (SAR), gain, electric (E)-, and magnetic (H)-field) were explored to assess the sensor’s suitability. The finite element analysis (FEA) of the sensor mounted on the diaphragm was also performed for a pressure range of 0–10 kPa, and the corresponding stress, strain, and deformation were plotted. The FEA results indicate that deformation alters the dielectric properties of the substrate material at different pressures; thus, it helps identify the zone under advanced pregnancy, enabling preventive measures to be taken before the recurrence of DH.
Multimodal generative AI systems like Stable Diffusion, DALL-E, and MidJourney have fundamentally changed how synthetic images are created. These tools drive innovation but also enable the spread of misleading content, false information, and manipulated media. As generated images become harder to distinguish from photographs, detecting them has become an urgent priority. To combat this challenge, we release MS COCOAI, a novel dataset for AI generated image detection consisting of 96000 real and synthetic datapoints, built using the MS COCO dataset. To generate synthetic images, we use five generators: Stable Diffusion 3, Stable Diffusion 2.1, SDXL, DALL-E 3, and MidJourney v6. Based on the dataset, we propose two tasks: (1) classifying images as real or generated, and (2) identifying which model produced a given synthetic image. The dataset is available at https://huggingface.co/datasets/Rajarshi-Roy-research/Defactify_Image_Dataset.
Existing financial-NLP benchmarks mostly evaluate prepared artifacts such as filings, tables, or extracted values. Real accounting begins earlier: source documents must be reconciled into cited journal entries, aggregated into a balance sheet, and checked for contradictions. We introduce FinBalance, a multi-document accounting reconciliation benchmark built from source-document bundles across eight industries, three period types, and five difficulty levels. Human-authored business scenarios, accounting policies, tax/FX treatments, document schemas, distractors, and inconsistency templates are composed by a deterministic generator whose ledger produces journal entries,balance sheets, and 23 inconsistency-code labels. On a 710-record evaluation split, six contemporary LLMs reach at most 46% exact final-balance-sheet accuracy. Four models show a 26-41 pp gap between BS_exact, the model's reported balance sheet, and BS_recon, the balance sheet obtained by replaying its entries through our ledger. Models often recover numerically plausible entries but fail to bind them to supporting documents and aggregate them consistently. Citation-pressure prompting barely changes document-linking errors, while ledger-feedback ablations substantially improve reported balance sheets and expose inconsistency-detection trade-offs. Expert finance reviewers validate the benchmark design and labels.