This study explores the evolution of polymer composites in naval and aerospace applications, specifically their use in high-stress components such as aircraft wings and fuselages. It highlights the impact of resonance on performance and safety, emphasizing the benefits of the vibratory-wet layup technique over traditional methods. This innovative approach improves the fiber–resin interface, reduces voids, and enhances material properties through controlled vibration. Focusing on composite T-joint materials, the research assesses the effects of vibration on mechanical properties using polymer composites, polyvinyl chloride (PVC) foam, glass fiber, and epoxy resin. These materials were fabricated using both standard and vibratory-wet layup methods to optimize resin distribution and minimize voids. Mechanical properties were evaluated through tensile testing, three-point bending, Shore hardness tests, and water absorption experiments. Advanced machine learning techniques, such as Quantum Neural Networks (QNN) and the Puma Optimization Algorithm (POA), were employed for predictive analysis. The hybrid QNN–POA model proved to be the most accurate, achieving a mean error of just 0.16, surpassing traditional approaches. Experimental results revealed that TJ1 composites, particularly with vibration assistance (W-VA), exhibited the highest load-bearing capacity, reaching 9000 N with 8.36-mm displacement in tensile tests and 13,000 N with 11-mm displacement in bending tests. Although TJ-2 and PVC composites also performed well, they exhibited slightly higher displacements. Overall, the study confirmed TJ-1's superiority for high-load aerospace applications due to its enhanced strength and minimal displacement under vibration.
Globally, the tibia, femur, and knee joints of the lower limbs frequently sustain severe injuries in vehicle-to-vulnerable road user (VRU) accidents. The design of vehicle structures is crucial for absorbing impact energy and reducing VRU injuries. The advanced pedestrian legform impactor (APLI) offers more precise biomechanical performance for evaluating lower limb injuries compared to other legform impactors. Traditional structural optimization methods often overlook the discrete nature of vehicle structures and the complexity of biomechanical models, where injury responses are highly nonlinear. This study investigates a multiobjective discrete optimization (MODO) algorithm tailored for vehicle structures in APLI impacts. The proposed MODO algorithm integrates a multiple attribute decision making (MADM) model, using the TOPSIS method, with weight coefficients derived from Entropy and AHP methods. Iterative refinement through successive orthogonal experiments efficiently manages numerous design variables and levels. The results demonstrate that the MODO algorithm achieves optimal design by integrating seamlessly with the MADM model. Additionally, this algorithm shows significant potential for addressing other complex engineering challenges.
Current research on chassis-integrated control predominantly focuses on rule-based coordination of subsystems, with scant consideration given to the communication mechanisms required for optimal matching among them. In this study, a novel integrated control scheme grounded in game theory is put forward, leveraging Active Front Steering (AFS), Direct Yaw-Moment Control (DYC) and Active Suspension System (ASS). Each of the three control subsystems has distinct objectives aimed at maximising vehicle drivability. Initially, a composite model incorporating vehicle dynamics and driver behaviour is constructed. Subsequently, in accordance with Pareto-optimality theory, by minimising the linear combination of cost functions and dynamically adjusting the relative weights of each subsystem, a feasible and stable cooperative distributed model predictive control (FSC-DMPC) framework based on a hierarchical strategy is devised. This framework serves to establish communication channels and mitigate conflicts among subsystems. On this foundation, a convex iteration algorithm and safety constraints are employed to further guarantee the feasibility and stability of the designed controller. Ultimately, simulation tests are conducted on the Carsim-Simulink joint platform to validate the efficacy of the proposed controller.
This study aimed to evaluate the effect of deep‐cryogenic treatment (DCT) on the properties of electrodes, including corrosion resistance, electrochemical stability, and electrochemical machining (ECM) performance, in wire arc‐produced SS309. Deposition parameters such as voltage (8, 10, and 12 V), electrolyte concentration (20, 30, and 40 g/l), duty cycle (45, 55, and 65%), and pulse frequencies (40, 50, and 60 Hz) are varied to examine ECM performance. The electrical conductivities of BeCu and SS304 increased by 37.88% and 83.31%, respectively, indicating easier ion transfer and better machining capabilities. The corrosion resistance of DCT‐modified electrodes is further improved, with corrosion current densities decreasing by 26.1% for BeCu and 43.5% for SS304. Electrochemical stability tests showed that DCT enhanced the stability of both electrodes, evidenced by a slight shift toward more positive corrosion potentials and lower current responses. In terms of ECM performance, compared to untreated electrodes, DCT‐treated samples achieved higher material removal rates, improved circularity, and reduced conicity, indicating better geometric accuracy and surface quality. DCT‐treated SS304 electrodes exhibited the best performance, with increased machining stability and precision. This research demonstrates that DCT is a promising method for improving the ECM process, especially in high‐precision fields such as aerospace, automotive, and biomedical manufacturing.
Nonlinearities in mechanical systems pose significant challenges for efficiently solving multi-body dynamics (MBD) problems. Although simulations of traditional mechanisms with perfect joints can be performed efficiently, joints in practical applications are often characterized by clearances, leading to reduced simulation efficiency and accuracy. Improving solver effectiveness is essential for simulating systems with nonlinearities. This paper explores the use of Julia, a high-performance open-source programming language, to solve MBD problems formulated as index-1 differential-algebraic equations (DAEs). Euler parameters (quaternions) are employed to represent the orientation of rigid bodies. To illustrate the method's adaptability in addressing non-standard joint types, both perfect and imperfect (with clearance or friction) planar roller guide joints are modeled alongside common perfect joints. A case study of a vehicle sliding door system is presented. The numerical results are validated through experiments conducted on the same sliding door mechanism, demonstrating the model's accuracy in capturing the dynamic behavior of the system. Results from the Julia implementation are compared with those from the MATLAB implementation to assess computational performance under identical conditions. The study emphasizes efficiency improvements, particularly in simulating joints with clearances, where nonlinear contact and friction forces increase the computational costs. The findings indicate that Julia offers advantages in computational efficiency, achieving about a 5% reduction in CPU time compared to MATLAB on average. By demonstrating both the modeling accuracy and computational efficiency, this research highlights the potential of Julia as an effective tool for simulating complex MBD systems with nonlinearities. The methodology can be extended to other mechanical systems with similar joint with clearance or friction, improving the accuracy and efficiency of dynamic analysis in engineering applications.