Peñaloza, C.H., Wood, A., Eadie, E., Noakes, C., King, M.‐F. and Wood, K. (2023) Validated computational modeling to evaluate the spatial inactivation of airborne pathogens by Far‐UVC irradiation. Photochem Photobiol. Accepted Author Manuscript. https://doi.org/10.1111/php.13807 The above article, published online on April 8, 2023 in Wiley Online Library, has been withdrawn by agreement between the Editor in Chief, authors, and Wiley Periodicals LLC. The withdrawal was requested by the authors due to a unit conversion error identified post‐publication that invalidates the conclusions of the article.
There is a typographical error in Equation 13, which should instead read:
We discuss the design, manufacturing, and qualification of the ESTHER shock-tube and its associated instrumentation. ESTHER is a new generation shock-tube funded by the European Space Agency and developed by an international consortium led by the Institute of Plasmas and Nuclear Fusion, an associated laboratory from the Instituto Superior Técnico of Lisbon. This facility aims at improving the European predictive capabilities for Spacecraft planetary entries, providing support for the next generation European exploration endeavours. The main drivers for this facility design have been (in no particular order) performance, repeatability, and cleanliness. These are enforced through an innovative design encompassing a laser-ignited, H2/He/O2 combustion driver capable of reaching pressures up to 600bar, and strict tolerances for the shock-tube interior surface state. A significant effort has also been put into setting- up state-of-the-art diagnostics. Besides the traditional streak-camera/spectrometer setups for carrying emission spectroscopy in the visible range, an additional VUV capable streak- camera/spectrometer setup is under development, complemented by a fast camera/MWIR spectrometer setup. ESTHER will be capable of carrying optical measurements in the ex- tended 150nm–4.5μm range. Finally an in-house developed interferometer will be deployed for providing time-resolved electron density measurements.
The Orbital 500R is a commercial semi-reusable, two-stage launch system under development by Orbital Access. The focus of this paper is a numerical aerodynamic analysis of the reusable first stage spaceplane, capable of powered and glided flight. The vehicle is intended to release expendable upper stage(s) to inject 500-kilogram of payload into low Earth orbit. Ejection of the upper stage(s) is expected to be above 85-kilometres, after which the first stage spaceplane will perform re-entry and landing. Toolset validation and the establishment of best practice is an integral aspect of assessing and optimising system performance and controllability. Steps have been taken to progress this, related to the use of Fluid Gravity Engineering Navier-Stokes solver, ANITA. The validation activities were focused around the characterisation of the aerodynamics of two wing-body experimental models, tested across a range of angles of attack at Mach 4.0 and 8.2 respectively. The results have provided a sufficient level of confidence in the use of ANITA to assess the aerodynamic performance of spaceplane wing-body configurations for supersonic and hypersonic flow regimes. A computational assessment of the vehicle's aerodynamics has been performed by means of both engineering-based tools and Navier-Stokes CFD computations. Lessons learned from the validation activities fed into the use of ANITA to characterise the vehicle's aerodynamics from Mach 3.0 and above. The lift and drag characteristics of the vehicle were found to be very comparable to those documented for the X-34 reusable launch vehicle from Mach 2.0 up to Mach 6.0. Furthermore, strong code-to-code agreement was observed with the SU2 and ANSYS-Fluent Navier-Stokes solvers for aerodynamic characteristics at Mach 3.0.
The attenuation of a blast wave from a high-explosive charge surrounded by a layer of inert material is investigated experimentally in a spherical geometry for a wide range of materials. The blast wave pressure is inferred from extracting the blast wave velocity with high-speed video as well as direct measurements with pressure transducers. The mitigant consists of either a packed bed of particles, a particle bed saturated with water, or a homogeneous liquid. The reduction in peak blast wave overpressure is primarily dependent on the mitigant to explosive mass ratio, M/C, with the mitigant material properties playing a secondary role. Relative peak pressure mitigation reduces with distance and for low values of M/C (< 10) can return to unmitigated pressure levels in the mid-to-far field. Solid particles are more effective at mitigating the blast overpressure than liquids, particularly in the near field and at low values of M/C, suggesting that the energy dissipation during compaction, deformation, and fracture of the powders plays an important role. The difference in scaled arrival time of the blast and material fronts increases with M/C and scaled distance, with solid particles giving the largest separation between the blast wave and cloud of particles. Surrounding a high-explosive charge with a layer of particles reduces the positive-phase blast impulse, whereas a liquid layer has no influence on the impulse in the far field. Taking the total impulse due to the blast wave and material impact into account implies that the damage to a nearby structure may actually be augmented for a range of distances. These results should be taken into consideration in the design of explosive mitigant systems.