3D printing has rapidly evolved into a versatile fabrication strategy for advanced energy storage devices by enabling unprecedented control over geometry, porosity and material distribution. Compared with conventional slurry-based manufacturing, 3D printing offers distinct advantages for constructing thick electrodes, complex 3D architectures and integrated battery components, thereby opening new pathways toward simultaneously achieving high energy density and high-power performance. Nevertheless, the electrochemical functionality of 3D-printed structures is not solely determined by their macroscopic design. As-printed green bodies typically suffer from high porosity, weak interparticle bonding and substantial organic content, making post-processing an indispensable step for realizing practical energy storage performance. This review systematically summarizes recent progress in 3D printing technologies for energy storage applications, including direct ink writing, electrohydrodynamic printing, fused deposition modeling, stereolithography and binder jet printing. Particular emphasis is placed on the critical role of post-processing, especially sintering, in regulating microstructural evolution, phase stability, interfacial bonding and electron/ion transport pathways. The effects of key sintering parameters, such as temperature, dwell time and heating rate, densification behavior, and electrochemical performance are critically discussed. Furthermore, emerging strategies involving rapid sintering, high-throughput experimentation and machine-learning-assisted optimization are highlighted as promising approaches to accelerate process development and improve reproducibility. By elucidating the intrinsic coupling between 3D printing and sintering-based post-processing, this review provides practical guidelines for the rational design and scalable fabrication of high-performance 3D-printed energy storage devices.
Layered double hydroxides (LDHs) are promising electrocatalysts for the oxygen evolution reaction (OER), yet their practical application remains limited by poor electrical conductivity and sluggish reaction kinetics. In this work, we synthesize three high-entropy LDHs (HELDHs) featuring a hierarchical architecture of microspheres assembled from ultrathin nanosheets, via a simple hydrothermal method using a combination of low-cost, catalytically active transition metals (Fe, Co, Ni, Mn, Zn, Cu, and Cr). Among them, the FeCoNiMnZn HELDH exhibits outstanding OER performance, requiring an overpotential of only 306 mV to reach a current density of 100 mA cm(-2). Notably, during 200 h of continuous operation, the device exhibits a stable and, in some cases, increasing current output. This exceptional activity is attributed to the formation of abundant cation vacancies, induced by Zn leaching, which enhance the intrinsic catalytic properties by optimizing the adsorption energies of key OER intermediates. Density functional theory calculations further validate that these vacancies modulate the electronic structure and lower reaction barriers, underscoring the effectiveness of cation-vacancy engineering in high-entropy systems for efficient and durable water oxidation catalysis. The optimized catalyst was further evaluated as the air cathode in a zinc-air battery, demonstrating practical electrochemical performance.
Copper chalcogenides offer high charge mobility and low lattice thermal conductivity but suffer from structural instability due to dynamic Cu+ migration. Here, we report a colloidal hot-injection synthesis of ternary cesium copper selenide (CsCu5Se3) nanocrystals (NCs), achieving precise control over phase, size, and morphology through tailored precursor-ligand modulation. This strategy enabled systematic exploration of stable and metastable Cs-Cu-Se phases and mechanistic investigation of nucleation and growth, providing insight into phase modulation and dimensional control at the nanoscale. CsCu5Se3 NCs exhibit low lattice thermal conductivity (similar to 0.5 Wm-1K-1) and an experimental zT of 0.27 at 718 K. Complementary first-principles calculations, consistent with experimental electronic and optical responses, predict a zT of 1.05 at 1000 K. These findings elucidate the formation dynamics of CsCu5Se3 and establish ABZ (A = alkali, B = metal, Z = chalcogen) NCs as tunable platforms for advanced functional applications.
As energy demand grows, climate change threatens to undermine adequate levels of indoor environmental quality (IEQ) in residential buildings. Urban Building Energy Models (UBEM) play a crucial role in assessing energy consumption, but their capability to evaluate thermal comfort remains limited. This paper analyzes two modeling approaches—Resistance-Capacitance (RC) models and Large-Scale (LS) simulations automated from GIS/CityGML to generate TRNSYS files—to assess their suitability for thermal comfort analysis in UBEM workflows. While RC models offer computational efficiency and simplified parameterization, they rely on air temperature approximations, limiting accuracy in complex buildings. LS models provide detailed multi-zone simulations, incorporating solar gains and occupant behavior, yet demand higher computational resources and model preparation efforts. A qualitative SWOT analysis highlights the strengths and limitations of both methodologies regarding computational cost, zoning capabilities, and thermal comfort indicators. Results indicate that both methods can estimate adaptive comfort and heat index, but the choice depends on accuracy requirements and computational constraints.
ABSTRACT Lattice strain engineering can regulate the electronic structure of electrocatalysts, but stabilizing distorted metastable phases remains challenging. Here, we report an N,N‐dimethylformamide‐assisted strategy for synthesizing metastable hexagonal close‐packed (HCP) Ni nanoparticles with local lattice‐spacing deviations reaching approximately 5.2%. Structural and spectroscopic analyses support a dilute interstitial‐carbon‐stabilized HCP Ni framework dominated by expanded metallic Ni─Ni coordination rather than ordered Ni 3 C. Carbon‐associated perturbations inhibit structural relaxation and retain the distorted HCP framework. Operando x‐ray absorption and infrared spectroscopies indicate the formation of a NiOOH‐like working surface coupled to an HCP‐derived subsurface framework, accompanied by potential‐dependent changes in the interfacial hydrogen‐bonding environment and urea‐derived species. Calculations using idealized metallic models show that HCP lattice strain induces a Ni d‐band upshift, anisotropic Ni─Ni bonding, and localized charge redistribution, modifying adsorption‐energy trends for the urea oxidation reaction. The optimized HCP‐Ni delivers an apparent steady‐state Tafel slope of 26.95 mV dec −1 , over twice the electrochemically active surface area‐normalized activity of the face‐centered cubic‐containing controls, and approximately 98% apparent urea conversion after 22 h. It sustains current for over 120 h in three‐electrode testing and enables over 400 h of urea‐assisted zinc–air battery cycling. This work demonstrates dilute interstitial‐carbon stabilization as a route to strained metastable electrocatalysts.