Cuprate high-temperature superconductors, such as Yttrium Barium Copper Oxide (YBCO), are extremely promising for emerging technologies such as low-power computing, data storage, quantum sensors and superconducting electronics. However, the realization of high-performance functional nanostructures presents formidable challenges due to the difficulty of applying conventional nanofabrication methods to such sensitive materials, making the search for alternative methods a key enabling factor. Since YBCO's superconducting and normal-state properties are highly dependent on oxygen stoichiometry, precise nanoscale control of the oxygen content represents a highly appealing approach for creating advanced nanoengineered devices. In this work, we demonstrate the precise fabrication of sub-micrometer, grayscale patterns over large areas in epitaxial YBCO thin films, achieving finely tuned optical and superconducting transport properties by locally controlling the stoichiometry through maskless direct laser writing under ambient conditions. Cryogenic magneto-optical imaging and transport measurements in irradiated devices directly demonstrate the spatial tuning of the critical temperature and carrier density with the patterning conditions. Correlated Raman microscopy and reflectometry indicate a laser-power dependent oxygen depletion in the irradiated regions. The proposed laser-controlled stoichiometry approach provides a direct and scalable method to navigate the phase diagram of high-TC superconducting oxides, offering new possibilities for integrating functional nanostructures into superconducting devices.
Double perovskites (ABC2D6) are versatile materials with applications in photovoltaics, optoelectronics, and thermoelectrics, where phonon-mediated thermal transport is critical. However, high-throughput phonon calculations by density functional theory (DFT) are computationally prohibitive due to the large supercells required. We develop a deep learning interatomic potential, Elemental-SDNNFF, trained directly on DFT-calculated forces within an active learning framework, enabling efficient prediction of phonon properties across thousands of double perovskites. Using this model, we screened 9709 cubic double perovskite structures, identifying 1597 dynamically stable candidates. Their lattice thermal conductivities (LTCs) were predicted by coupling Elemental-SDNNFF with the Boltzmann Transport Equation, including off-diagonal contributions. For the most promising compounds, DFT validation and four-phonon scattering calculations revealed ultralow LTCs (<0.1 Wm-1K-1). Remarkably, Cs2HgPtCl6 was found to possess a bandgap of 0.35 eV and an LTC of 0.071 Wm-1K-1 at room temperature-the lowest ever reported for isotropic bulk materials, comparable to air. The result was independently confirmed by molecular dynamics simulations with a DeePMD potential and phonon lifetime extraction using DynaPhoPy. This work establishes an efficient machine learning-assisted framework for fast screening of dynamic stability and accurate prediction of phonon transport in complex materials, highlighting double perovskites as Double Perovskites, High-Throughput DFT, Machine Learning, Phonon Boltzmann Transport, Record-Low Lattice Thermal Conductivity promising candidates for thermoelectric and thermal insulation applications.
Three-dimensional topological insulators possess topologically protected surface states with spin-momentum locking, which enable spin-charge-current interconversion (SCI) by the inverse Edelstein effect (IEE). However, it remains experimentally challenging to separate the surface-related IEE from the bulk-type inverse spin Hall effect (ISHE). Here we search for distinct time-domain signatures of the two SCI phenomena in an F/TI model stack of a ferromagnetic-metal layer F(Co and Fe) and a topological-insulator (TI) layer (Bi2Te3, SnBi2Te4, and Bi1-xSbx with x = 0.15 and x = 0.3), where the focus is on Bi2Te3. A femtosecond laser pulse serves to induce a transient spin voltage & micro; F s in Fand, thus, drive an ultrafast spin current out of F. SCI results in a transverse charge current with a sheet density Ic that is detected by sampling of the emitted terahertz electric field. Analysis of the dynamics of Ic(t) vs time t relative to & micro;F s (t) reveals two components with distinct timescales: (1) a quasi-instantaneous response and (2) a longer-lived response with a relaxation time of 270 fs, which is independent of the Fmaterial chosen. Component (1) is consistently ascribed to the ISHE. In contrast, we interpret component (2) as a signature of interfacial spin accumulation and the IEE at the F/Bi2Te3 interface, with a fraction of less than 10-2 of the incident spins participating. This assignment is fully consistent with respect to its dynamics and magnitude. We rate other possible signal contributions, such as spin trapping in intermediate states, as less likely. Our results show that the femtosecond dynamics of photocurrents allow us to differentiate the ISHE and the IEE and, more generally, provide important insights into the mechanisms of spin transport and SCI in F/TI stacks.
As the field of organic thermoelectrics advances toward maturity, an accurate and standardized reporting of performance metrics becomes essential to drive further progress and assess real-world viability. The common geometric form factors and material properties (conductivity, anisotropy, stability, etc.) differ from those of conventional bulk inorganic systems, and thus specific recommendations may apply. Herein, we compile prevalent points of concern in the reporting of thermoelectric performance for organic materials and devices. Moreover, we propose a list of critical factors and metrics that should be explicitly documented when reporting the performance of novel organic thermoelectric materials or devices.
Van der Waals (vdW) heterostructures enable tailored electronic and magnetic phases by stacking atomically thin layers with pristine interfaces. Here, we investigate fully 2D Cr2Ge2Te6/WTe2 heterostructures and identify a strong enhancement of ferromagnetism in Cr2Ge2Te6 (CGT). Magnetotransport measurements across multiple devices with WTe2 thicknesses ranging from monolayer to bulk reveal a robust anomalous Hall effect together with a more than two fold increase of the Curie temperature and substantially enhanced coercive fields. Interface microscopy confirms chemically abrupt vdW interfaces with no detectable interdiffusion, while control experiments rule out processing- or stray-field-induced artifacts. Our experiments and theoretical calculations demonstrate that interfacial charge transfer renders CGT conductive and that proximity-induced lattice distortions in CGT enhance exchange and magnetocrystalline anisotropy. These results establish strain-mediated lattice reconstruction as a strategy for engineering high-temperature magnetic order in 2D heterostructures and clarify that modifications within the magnetic layer itself can govern proximity effects in vdW stacks.