Kruger Inc. is a Canadian corporation which manufactures publication papers, tissue, lumber and other wood products, corrugated cartons from recycled fibres, green and renewable energy, and wines and spirits. Kruger Inc. operates facilities in Québec, Ontario, British Columbia, Newfoundland and Labrador, and the United States....
Performance and recyclability of paper coatings depend on precise control of polymer, surfactant, filler compositions as well as oil to water ratios to produce stable dispersions and defect-free films. These factors determine fiber polymer interactions and coating removability during repulping, which are critical for efficient fiber recovery and recyclable packaging. This study examines PLA organoclay aqueous dispersions stabilized by sodium dodecyl sulfate (SDS), emphasizing particle size, zeta potential, and solids content. Using a full factorial design (2(4)) and stepwise regression, predictive equations have been established to identify the dominant formulation factors and illustrate their combined effects through response surface modeling. The most promising formulation within the tested range (PLA 10.65 wt%, SDS 0.10 wt%, organoclay 3 wt%, oil-to-water ratio 1.4) was selected from the JMP Profiler using a multi-criteria optimization, simultaneously maximizing solids content while maintaining submicronic particle size. This formulation yielded similar to 13% solids, kinetically stable dispersions, and defect-free coatings. Under laboratory-scale settings, repulpability tests revealed effective disintegration (94.7% +/- 1.5% fiber recovery) without foaming. Overall, this study proposes a formulation-driven optimization technique for producing recyclable, bio-based PLA-organoclay coatings for recyclable paper packaging, guided by a design of experiments strategy.
The growing consumption of semi-and fully prepared products has increased demand for packaging materials that protect goods from production to consumption while minimizing losses. Currently, most packaging materials are derived from petroleum-based polymers, which are generally non-biodegradable and contribute to environmental pollution. Paper is considered a promising alternative, provided that its barrier and mechanical properties are improved. In this study, cellulose filaments were examined for their potential to enhance the barrier properties through a water-based coating formulation containing cationic starch, montmorillonite, and alkyl ketene dimer as matrix components. The methodology involved preparing coating formulations with varying cellulose filaments concentrations, applying these to paper substrates, and evaluating the coated papers for mechanical and barrier performance. The results showed a significant improvement in the overall performance of the coated paper. For the formulation containing 2 wt% cellulose filaments, the tensile, tear, and burst indices increased by 27.8%, 41.2%, and 29.2%, respectively. In addition, significant improvements in barrier properties were observed, with the Cobb value decreasing from 21.1 to 5.8 g/m2 and the water vapor transmission rate reducing from 409.1 to 158.2 g/m2 & sdot;day. The coated paper also exhibited strong hydrophobicity, with water contact angles exceeding 117 degrees. These findings demonstrate the potential of cellulose filaments as an effective coating additive for improving the mechanical, physical, and barrier properties of paper, offering a promising approach for developing sustainable paper-based packaging materials for non oxygen-sensitive applications.
The traditional use of single-use plastics in the packaging sector is limited by pollution, non-recyclability, and non-biodegradability. Replacing it with recyclable, biodegradable, and compostable materials such as cellulose has become vital. In this study, mixtures of refined kraft pulp and cellulose filaments were used to produce paper with good barrier properties. The results showed that cellulose filaments significantly improved the barrier properties of the handsheets without the use of other chemical agents. The water vapor transmission rate (WVTR) of samples produced from refined kraft pulp alone was 177 g/m2. day, which significantly decreased to 77 g/m2. day by the addition of 80 % cellulose filaments owing to the formation of a complex network of physical and chemical bonds between the fibers. The water barrier also improved significantly as the Cobb60 value decreased from 87 to 57 g/m2 when 80 % cellulose filaments were used. Furthermore, all the samples produced had a recyclability percentage of more than 89 %, which is an essential requirement in the packaging industry.
Paper packaging coated with synthetic materials raises major environmental and health concerns. As a response, new promising approaches consist of using sustainable coatings based on nano-biocomposites. In this work, polylactic acid (PLA)/organoclays (OC) aqueous dispersions thickened by xanthan gum were applied on paper using the bar coating technique. Morphological and topographical analyses using scanning electron microscopy and laser confocal microscopy showed a smooth polymeric layer completely covering the fibrous and porous surface of the paper, resulting in a substantial improvement in the barrier properties. Water vapor transmission rates and water absorptivity had undergone a major decrease when coatings containing 3 and 5 wt% OC were used, while no significant difference was observed between the 1 wt% OC formulation and pure PLA. Moreover, coated paper showed no air porosity with 0 mL/min values recorded for all samples, thus confirming the morphology observations of the surfaces and cross-sections. Additionally, the contact angle measurements indicated a slight decrease in the hydrophobicity of the base paper when coated with PLA and 1 wt% OC. However, this reduction was reversed with the addition of 3 and 5 wt% OC, restoring the hydrophobicity.Highlights Polylactic acid (PLA)/organoclay (OC) coatings sealed and covered completely the paper's surface. Water resistance of the base paper had a major improvement due to the coatings. The porous surface of the paper was successfully sealed, leading to no air porosity. Adding 3 and 5 wt% OC resulted in excellent barrier performances. PLA/OC coatings have the potential to replace synthetic paper coatings.
Single-use plastic packaging has become a serious problem for many countries, including Canada, with millions of tons consumed annually without considering end-of-life impact. Researchers are developing sustainable alternatives to non-biodegradable plastic. While cellulose microfibers (MFC) and nanocrystalline cellulose (NFC) are common raw materials for film production, their preparation requires costly chemical treatments that cause environmental pollution. Kruger Inc. developed a method to produce cellulose filaments (CFs) with high fibrillation using only mechanical treatment. This study uses CFs to produce packaging films through handsheet forming, with cationic starch (CS) and Alkylketene Dimer (AKD) as additives for enhanced water, water vapor, and oxygen resistance. We analyzed morphological, barrier, mechanical, and optical properties using various techniques, including SEM, WVTR, WVP, OTR, contact angle, Cobb 60, burst index, tensile index, tear index, and transmittance. The films showed promising properties, with WVTR decreasing to 49.42 g/m2·day, WVP to 2.82 × 10-6 g·m/m2·day·Pa, OTR to 3.3 cc/m2·day, and Cobb value to 32.2 g/m2. After adding 3 % CS, films demonstrated good mechanical performance with a tensile index of 80.49 N·m/g, burst index of 10.93 kPa·m2/g, and tear index of 0.66 mN·m2/g. These results prove CFs' effectiveness with CS and AKD in forming films with excellent properties. CFs show potential compared to other biopolymers due to their eco-friendliness and cost-effectiveness. The production method is simple, scalable, and yields biodegradable films composed of biomass-derived materials.