
The adsorption mechanism of Basic Red 9 (BR9) onto expanded vermiculite (EV) was investigated using a statistical physics modeling approach to elucidate adsorption site heterogeneity and energetics at the microscopic scale. Experimental adsorption isotherms from the literature were analyzed using several theoretical models, including mono-and multilayer formulations with different energy levels. The monolayer model with two energy levels provided the best agreement with experimental data, yielding physically meaningful parameters. The steric analysis revealed a multimolecular adsorption mechanism characterized by n > 1 and a temperature-dependent redistribution of BR9 molecules between two distinct types of adsorption sites. With increasing temperature, n(1) increased while n(2) decreased, indicating enhanced cooperative adsorption on primary sites and reduced aggregation on secondary sites. This behavior was accompanied by a decrease in the density of primary sites (Nm(1)) and a significant increase in secondary site density (Nm(2)), suggesting a thermal activation of less accessible or interlayer adsorption sites. Energetic analysis showed that the adsorption energies (Delta E-1 and Delta E-2) ranged from approximately -8 to -15 kJ mol(-)& sup1; , indicating an exothermic and spontaneous process dominated by physisorption mechanisms such as electrostatic interactions and van der Waals forces. Compared with conventional Langmuir and Freundlich models, which provide only averaged energetic parameters, the applied statistical physics model offers a more mechanistic and detailed description of adsorption site heterogeneity. The obtained results are consistent with reported adsorption behaviors of cationic dyes on vermiculite and related clay minerals, confirming the robustness and physical relevance of the proposed approach.
Characterizing the mechanical behavior of polymers remains challenging due to their coupled elastic, rate-dependent, and plastic deformation mechanisms, often requiring extensive experimental testing. Nanoindentation offers a rapid and non-destructive alternative, but existing approaches for inferring bulk mechanical proper ties from indentation responses often neglect pressure sensitivity and strain-rate effects. This study introduces a physics-guided inverse machine-learning framework using autoencoder-based multitask learning (AE-MTL) to identify effective mechanical properties of amorphous engineering thermoplastics from nanoindentation load-displacement responses. Synthetic training data are generated using finite element (FE) simulations with Berkovich and spherical indenters and a constitutive model that accounts for pressure sensitivity and rate-dependent plastic flow through the Drucker-Prager yield criterion and a power-law dependence of flow stress on strain rate. Using compact physics-engineered descriptors, the optimized AE-MTL model achieves high predictive accuracy (R2 approximate to 0.99) for elastic modulus and plastic-flow parameters on unseen parameter combinations within the sampled domain. Benchmarking against literature data for representative engineering thermoplastics and ex perimental validation for polycarbonate (PC) and polymethyl methacrylate (PMMA) show close agreement with reference mechanical properties. Adapting the framework to other constitutive formulations, material classes, or indentation configurations would require additional FE data generation, retraining, and independent validation.
To address the issues of low strength, microstructural inhomogeneity, and interlayer defects in 2219 aluminum alloy fabricated by additive friction stir deposition (AFSD), this study proposes a hybrid processing route combining solution treatment, cold rolling, and creep aging. The effects of cold rolling reduction (0%-20%) on the microstructure and mechanical properties were systematically investigated. The results show that the AFSDfabricated alloy exhibits microstructural inhomogeneity along the deposition direction. Solution treatment effectively dissolves the secondary phases, but introduces interlayer defects during quenching. Cold rolling significantly improves structural integrity and alters the fracture behavior, thereby leading to better overall mechanical properties after creep aging. Under the investigated conditions, a cold rolling reduction of 10%-20% provides a good balance between strength and ductility compared with lower or higher reductions. In addition, a quantitative strengthening model was established to evaluate the contribution of theta ' precipitates to the yield strength. This study provides an effective processing window and a quantitative analytical framework for tailoring the mechanical properties of additively manufactured 2219 aluminum alloy, offering guidance for its application in aerospace structural components.
Ni-doped rutile TiO2was studied by density functional theory to determine the effect of dopant concentration on its structural, electronic, and optical properties. Calculations were performed with the full-potential linearized augmented plane-wave method using GGA-PBE and GGA-mBJ exchange-correlation schemes. Substitutional Ni contents of 6.25%, 12.50%, 18.75%, and 25.00% were examined in the tetragonal rutile structure. The optimized lattice parameters decrease with increasing Ni concentration, indicating a progressive contraction of the crystal lattice after Ti substitution by Ni. The electronic structure shows the appearance of Ni-related impurity states within the forbidden region, which alter the excitation pathways of the host semiconductor. Although the calculated fundamental band gap increases with dopant content, the optical response is extended into the visible region because of transitions involving these intermediate states. The dielectric and absorption spectra also show optical anisotropy, with a stronger visible-light response as the Ni concentration increases. The results show that Ni incorporation changes the absorption mechanism of rutile TiO2and supports its potential for visible-light-responsive photocatalytic and optoelectronic applications.
First-principles density functional theory calculations were used to investigate the structural, electronic, mechanical, and optical properties of the proposed hexagonal CsAc intermetallic in the P63mc space group. Calculations employed CASTEP with the GGA-PBE functional and spin-orbit coupling. Structural optimization yielded lattice parameters of 3.874 & Aring; along the a-axis and 14.906 & Aring; along the c-axis, corresponding to contractions of 4.81% and 6.87%, respectively, and a unit-cell volume of 193.75 & Aring;3 . The electronic band structure and density of states reveal metallic, gapless behavior, with Ac-6d states contributing prominently near the Fermi level. The bulk modulus of 9.622 GPa indicates a mechanically soft and compressible structure, while the elastic constants reveal anisotropic mechanical behavior. Optical calculations demonstrate orientation-dependent dielectric functions, absorption coefficients, extinction coefficients, and reflectivity, highlighting differences in the interaction of CsAc with electromagnetic radiation. The calculated optical response also exhibits distinct dielectric-loss peaks near 7.19 eV for the (100) orientation and 7.94 eV for the (111) orientation using a 12 & times; 12 & times; 12 k-point mesh. The peak intensities remain sensitive to k-point sampling. Overall, these results provide a theoretical understanding of the structural, electronic, mechanical, and anisotropic optical properties of CsAc without establishing specific device performance or experimental realization.