Soil compaction and reduced infiltration capacity are critical constraints limiting soil physical quality and hydraulic functioning in semi-arid vineyard systems subjected to repeated machinery traffic. This study aimed to develop and evaluate a geometry-optimized strip tillage tool designed to improve structural functionality within the compacted root zone while minimizing inter-row disturbance. A U-shaped working body configuration, consisting of two oppositely inclined shanks and a central chisel, was theoretically substantiated and optimized using multifactor analysis. Field experiments were conducted to assess changes in penetration resistance, bulk density, and infiltration rate within the 20-40 cm soil layer under semi-arid conditions. The optimized geometry significantly reduced penetration resistance and bulk density in the trafficked strip, indicating alleviation of mechanical impedance and improved root-relevant physical conditions. Infiltration capacity increased after treatment, indicating enhanced hydraulic continuity within the root zone. Unlike full-width subsoiling, the localized strip intervention preserved inter-row soil stability and limited unnecessary disturbance, which is consistent with conservation-oriented soil management. The results indicate that geometry-optimized strip tillage is associated with improved soil physical quality and hydraulic function within compacted vineyard strips. The operational applicability of the developed implement may also depend on vineyard layout and terrain conditions. The prototype tool was tested under conditions representative of vineyards with standard row spacing and relatively moderate slopes typical for the experimental site. In vineyards with very narrow row spacing, steep slopes, or highly heterogeneous soil conditions, adjustments in working width, shank spacing, or tractor-implement configuration may be required. Future studies should therefore investigate the performance of the optimized geometry under contrasting vineyard configurations, including steep hillside vineyards and high-density planting systems. By linking implement design to quantitative soil structural and hydraulic indicators, this study contributes to the development of vineyard soil management practices for semi-arid perennial cropping systems.
Weeds pose a significant threat to crop yields, both in quantitative and qualitative terms. Modern agriculture relies heavily on herbicides; however, their excessive use can lead to negative environmental impacts. As a result, recent research has increasingly focused on Integrated Weed Management (IWM), which employs multiple complementary strategies to control weeds in a holistic manner. Nevertheless, large-scale adoption of this approach requires a solid understanding of the underlying tactics. This systematic review analyses recent studies (2013–2022) on herbicide alternatives for weed control across major cropping systems in the EU-27 and the UK, providing an overview of current knowledge, the extent to which IWM tactics have been investigated, and the main gaps that help define future research priorities. The review relied on the IWMPRAISE framework, which classifies weed control tactics into five pillars (direct control, field and soil management, cultivar choice and crop establishment, diverse cropping systems, and monitoring and evaluation) and used Scopus as a scientific database. The search yielded a total of 666 entries, and the most represented pillars were Direct Control (193), Diverse Cropping System (183), and Field and Soil Management (172). The type of crop most frequently studied was arable crops (450), and the macro-area where the studies were mostly conducted was Southern Europe (268). The tactics with the highest number of entries were Tillage Type and Cultivation Depth (110), Cover Crops (82), and Biological Control (72), while those with the lowest numbers were Seed Vigor (2) and Sowing Depth (2). Overall, this review identifies research gaps and sets priorities to boost IWM adoption, leading policy and funding to expand sustainable weed management across Europe.
The Urban energy systems face increasing pressure to decarbonise while maintaining security of supply and resilience to external disruptions. Rooftop photovoltaic (PV) systems on multi-apartment residential buildings offer a promising pathway to increase locally available renewable electricity in dense urban environments. However, reliable assessment of PV contribution requires a statistically robust understanding of residential electricity demand patterns at high temporal resolution. This article presents the first stage of a multi-layer study assessing the technical viability of rooftop PV deployment in multi-apartment buildings in Riga, Latvia, with a focus on energy availability and resilience. The object of the study is residential electricity demand in apartment buildings. Using hourly smart-meter data from a representative sample of 198 apartments (3.1 million observations), the study analyses whether households with different annual electricity consumption levels exhibit systematically different diurnal or seasonal demand structures once scale effects are removed. Electricity demand profiles were normalised by annual consumption and analysed using functional analysis of variance with permutation-based inference. The results show that mean hourly electricity consumption ranges from 0.09 kWh h⁻¹ in the lowest consumption group (<1000 kWh yr⁻¹) to 0.44 kWh h⁻¹ in the highest group (>3000 kWh yr⁻¹), while dispersion also increases markedly. However, after normalisation, neither diurnal nor seasonal load-shape functions differ statistically across consumption groups. The tests do not reject equality of diurnal profiles (p = 0.24) or seasonal profiles (p = 0.30). These findings demonstrate that higher residential electricity consumption in multi-apartment buildings reflects scale effects rather than distinct daily routines or seasonally concentrated usage. An assumption about winter-dominated electric heating in high-consumption apartments is not supported at a statistically significant level. From a practical perspective, the results support the use of representative, scalable demand profiles in subsequent modelling of rooftop PV generation, energy flows, and local energy availability, providing a robust foundation for resilience-oriented urban energy assessments.
Governments and international organizations increasingly promote sustainable, inclusive economic growth through the application of circular economy principles in production and consumption to address resource depletion, waste generation, and environmental impacts. This study aims to evaluate the relationship between circular economy indicators and short-run economic growth in European Union (EU) countries over the period 2004–2023, with particular emphasis on regional heterogeneity between Western and Eastern Member States. The analysis is based on a panel of 27 EU countries and employs a combination of fixed-effects (LSDV) models and a dynamic two-step Generalized Method of Moments (GMM) estimator to address unobserved heterogeneity, growth persistence, and potential endogeneity. The empirical model relates GDP per capita growth to key circular economy dimensions, including packaging waste generation, municipal waste recycling, environmental tax revenues, resource productivity, and circular economy–related innovation, alongside relevant control variables. The results indicate that the growth effects of circular economy indicators are transmission-channel specific. Packaging waste generation exhibits a positive but weakly significant association with short-run growth, reflecting the persistence of scale-driven expansion. In contrast, resource productivity and environmental taxation display strong and statistically significant positive effects in the dynamic specification, suggesting that efficiency improvements and well-designed fiscal instruments can enhance short-run economic performance. Circular economy–related innovation shows a negative and significant short-run effect, suggesting transitional adjustment costs and time lags between investment and realized productivity gains, while recycling does not exert a statistically significant short-run impact. Fixed-effects estimates reveal substantial regional heterogeneity across Western and Eastern EU countries. These findings imply that circular economy policies should be productivity-oriented, fiscally integrated, and development-stage sensitive. Environmental tax revenues should be reinvested through structured revenue-recycling schemes to support efficiency-enhancing technologies and industrial modernization. Innovation policies require stable, long-term financing and risk-sharing mechanisms to mitigate transitional growth slowdowns. Furthermore, less advanced Member States may require differentiated transition support to reduce short-run adjustment costs and ensure balanced economic convergence within the EU.
The use of alternative fuels is becoming increasingly relevant to meet environmental regulations. One of the most promising fuels is considered to be hydrotreated vegetable oil (HVO), which is available on the market and, according to previous studies, shows significant emission reductions. In recent years, the use of hydrogen in emission reduction from engines has also become increasingly relevant. In this regard, a study was conducted to understand the simultaneous use of these fuels, to check whether the ecological contribution could be even more significant, as well as to identify the impact on engine operation. Experimental tests were realized on a tractor Claas Ares 557ATX at 3 power take-off (PTO) shaft rotation frequencies (300, 450 and 600 min-1) using diesel and hydrotreated vegetable oil (HVO) at different hydrogen injection volumes: 5 l∙min-1, 30 l∙min-1 and 50 l∙min-1. A MAHA LPS ZW-500 power stand was used to load the tractor PTO shaft, determine power and torque, and maintain the PTO shaft speed. Fuel consumption was measured by laboratory scales, while emissions were determined using the AVL SESAM FTIR exhaust gas analytical system. As a result of the studies, no significant reduction in fuel consumption was observed, but an increase in torque and power on the PTO shaft was observed. With the addition of 5 l∙min-1, a decrease in carbon dioxide (CO2) emissions was observed. At the lowest H2 concentrations and PTO shaft speeds, a decrease in carbon monoxide (CO) was observed both when using HVO and conventional diesel fuel. Increasing the H2 concentration or PTO shaft rotation frequency resulted in an increase in CO emissions. At the same time, a decrease in hydrocarbon (HC) emissions was observed in all load modes when adding hydrogen gas.