
In order to improve the energy efficiency of industrial users and evaluate the energy efficiency level before optimizing the energy efficiency of enterprises,an energy efficiency evaluation method based on improved TOPSIS grey correlation analysis is pro-posed to find the weak link of energy use.Firstly,7 indicators of production,economy and environment are selected to build an energy efficiency index system.Secondly,the entropy weight method is used to calculate the index weight and classify the energy efficiency of industrial users,which can be used for the power grid to implement differentiated electricity prices for enterprises with high energy consumption.Finally,the improved grey TOPSIS analysis method is used to select 10 typical enterprise users with high energy consumption in a city for energy efficiency evaluation.The analysis shows that the weight of the energy con-sumption index per unit of output value is the largest,and the better the performance of the index,the higher the comprehensive energy efficiency evaluation result.Finally,the method is compared with other evaluation methods to verify the effectiveness of the method proposed in this paper.
For the desktop 6-axis robot arm developed by myself,a robot coordinate system model built by Solidworks a 3D-design soft-ware is converted to a URDF file and imported into the ROS system.The trajectory planning package is configured by the Moveit!Setup Assistant,including the controllers and the launch files,etc.,use MotionPlanning plugin to complete motion plan-ning in Rviz,and focus on analyzing RRT trajectory planning algorithm,using Moveit!tool.The paper studies linear trajectory and circular trajectory planning in Cartesian space.Finally,cubic spline interpolation is performed on the planned spatial trajecto-ry.The results of velocity and acceleration curves prove that the control requirements of the manipulator are met.The paper pro-vides a basis for further precise control of the manipulator.
Aiming at the problem that automation engineers cannot debug programs without physical objects at the early stage of the project,this paper uses Factory IO and S7-PLCSIM Advance3.0 to build a simulation environment,and simulates and debug a tridimen-sional depository control program with a stacker.From model building,PLC program,HMI program design and programming to joint debugging of the three,the results show that the simulation system can enable automation engineers to carry out program de-bugging at the early stage of the project,save the implementation time of the entire project,eliminate the possible technical con-flicts between disciplines and the cost waste caused by redesign and construction.
In the process of substation construction,affected by the two-dimensional and three-dimensional linkage algorithm,the speed of location information sharing is slow.Therefore,the sharing of installation location information of substation secondary equip-ment in two-dimensional and three-dimensional design platform is proposed.Based on TIN model,a two-dimensional and three-dimensional integrated spatial data model is constructed.Through IFC file analysis,the basic data associated with the two-dimensional and three-dimensional design platform is obtained.Combined with unified ID mapping and center point coordi-nates,a two-dimensional and three-dimensional linkage algorithm is designed.Finally,combined with the multi process theory,the equipment installation location information sharing is realized.The application results show that when the proposed two-di-mensional and three-dimensional design platform information sharing method is applied,location information sharing speed is not affected by the number of targets,and it is always maintained above 20 fps.
In order to obtain ideal fault identification results,a fault identification method of TFDS equipment based on automatic adjust-ment of shooting device is proposed.Firstly,the fault image of freight train is automatically taken,the fault image is denoised by mean filter,and the processed image is divided into training and test samples.After convolution and pooling,the parameters of the training samples are updated by random gradient descent algorithm to construct the convolution neural network model.After testing the test samples.The softmax regression function is used to output the fault identification results of freight cars.Experi-ments show that the TFDS equipment fault identification effect is good and this method has high practical application value.