
Purpose Rapid and reproducible trajectory planning is important for minimally invasive evacuation of hypertensive intracerebral hemorrhage (ICH). We developed AutoPathNet, a patient-specific automated 3D trajectory-planning framework that generates geometrically favorable candidate trajectories from preoperative imaging.Methods AutoPathNet reconstructs patient-specific anatomical models from CT-derived inputs, generates candidate entry-target trajectories, filters candidates according to predefined anatomical constraints, and ranks feasible trajectories using a composite geometric planning metric. Algorithm-generated trajectories were compared with surgeon-implemented catheter trajectories reconstructed from postoperative CT in a 21-patient validation cohort.Results The framework generated three candidate trajectories within approximately 31 s. In 16 of 21 paired cases (76.2%; Wilson 95% confidence interval, 54.9%-89.4%), the best algorithm-generated candidate had a lower m value than the surgeon-implemented catheter trajectory reconstructed from postoperative CT. This comparison uses postoperative catheter position as a procedural imaging reference and reflects geometric planning performance within the current constraint model, suggesting potential value as a neurosurgeon-supervised planning reference rather than evidence of clinical outcome superiority.Conclusion AutoPathNet rapidly generated patient-specific candidate trajectories for minimally invasive evacuation of hypertensive ICH. The framework may support neurosurgeon-supervised trajectory planning, but prospective validation using multimodal functional constraints and clinical outcome endpoints is required before clinical deployment.
Optimizing glenoid component positioning is a key determinant of stability, function and implant survival in total shoulder arthroplasty. Postoperative computed tomography (CT) is considered the reference method for assessing guide-pin or implant alignment, but it remains a retrospective evaluation and is often difficult to obtain in cadaveric research settings. Optical navigation systems such as the NDI Polaris provide immediate intraoperative geometric measurements and may represent a pragmatic alternative. This cadaveric validation study aimed to evaluate the agreement between NDI Polaris optical-navigation measurements and postoperative CT analysis for glenoid guide-pin positioning. Eight cadaveric shoulders underwent augmented-reality-guided placement of a glenoid guide-pin, followed by postoperative CT acquisition. Intraoperative optical-navigation measurements were recorded using an NDI Polaris tracking station. Two accuracy domains were analyzed relative to CT: (1) linear entry-point deviation (mm) and (2) angular deviation in version and inclination (degrees). Agreement between both measurement modalities was assessed using Bland-Altman analysis, complemented by descriptive accuracy statistics. Sixteen paired measurements were available for comparison. The mean absolute NDI-CT difference was 0.98 mm (SD 0.55; range 0.15-2.17 mm) for entry-point localization and 1.58° (SD 0.97; range 0.03-3.28°) for trajectory orientation. Bland-Altman analysis demonstrated a small systematic bias for both linear (-0.15 mm) and angular (-0.75°) parameters, with most discrepancies contained within approximately ±2 mm and ±4°, respectively. These results suggest that, under standardized acquisition conditions, optical navigation provides geometric measurements that closely approximate CT-based reference values and may serve as a practical surrogate in cadaveric research when CT access is limited. NDI Polaris optical tracking demonstrated good agreement with postoperative CT for evaluating glenoid pin positioning and may represent a practical alternative for accuracy assessment in cadaveric studies. These preliminary findings require confirmation in larger validation studies.
Meniscus informatics is a growing subject of study in the healthcare industry. One of the major hindrances to the healthcare system’s transformation is obtaining knowledge and meaningful information from complicated, high-dimensional and diverse sources. Modern biomedical research, for instance, has seen an increase in the use of complex, dissimilar, poorly documented, and generally unstructured electronic health records, imaging, sensor data and text, even after many current techniques have been used to extract more robust and useful elements from the data for analysis. New efficient standards for building end-to-end learning models from complex data are therefore needed. Therefore, the current study aims to examine the most recent research on the use of deep learning techniques for diagnosing meniscus tears and recommend creating comprehensive and meaningful interpretable structures that might benefit the healthcare industry. We also draw attention to shortcomings and the need for better technique development, and we provide new perspectives about this exciting new development in the field.
Robot-assisted surgery (RAS) is increasingly utilized in arthroplasty, with emerging evidence suggesting potential benefits, however, the overall evidence base remains immature. Given the heterogeneity of available systems, device-specific evaluation is required. The VELYS Robotic-Assisted Solution (VRAS; Johnson & Johnson MedTech) is an imageless, semi-active robotic platform for knee arthroplasty. This study provides a structured strategic evaluation of VRAS aligned with the National Institute for Health and Care Excellence Early Value Assessment (EVA) and proposes a roadmap for future evidence generation. 16 relevant studies were identified in a systematic literature search, predominantly retrospective and lacking randomized controlled trials. Findings were synthesized using a strengths, weaknesses, opportunities, and threats framework, with subsequent analysis to inform strategic recommendations. Key strengths of VRAS include avoidance of pre-operative computed tomography imaging, integration with established implant systems, a relatively short learning curve, and early signals of improved short-term outcomes. Weaknesses center on the limited quality and maturity of the evidence base, absence of long-term outcome data, and system-specific design considerations such as lack of haptic feedback boundaries. Opportunities include reduced resource burden with imageless workflows and potential optimization of patient outcomes, while threats involve high capital costs, competition from more established RAS platforms, and the risk of unmet evidence requirements within defined timelines. Across EVA domains, evidence for patient-reported outcomes, cost-effectiveness, and long-term clinical benefit remains insufficient. High-quality, adequately powered studies, comprehensive health-economic analyses, and registry-linked longitudinal studies are essential to define the clinical and economic value of VRAS in light of the EVA.
Fabricating high-fidelity, patient-specific aortic phantoms that possess both complex pathological features and physiological compliance remains a significant challenge for single-method manufacturing techniques. This study presents a complete virtual-to-physical prototyping workflow, enabled by a novel Hybrid Additive Manufacturing Platform (HAMP), for translating clinical imaging data into high-fidelity, patient-specific aortic phantoms. Building upon a validated brush-spin-coating technique capable of precise wall thickness control (±0.1 mm), the HAMP synergistically integrates 3D printing and casting. This integration overcomes the limitations of single-method techniques, uniquely enabling the creation of phantoms with (i) controllable interlayer delamination for mimicking dissection, (ii) enclosed multi-chamber structures for endoleak simulation, (iii) seamless integration of dissimilar materials, and (iv) the replication of complex intra-wall pathologies such as intramural hematoma. The platform's capability was rigorously demonstrated through the successful fabrication and application of four distinct classes of aortic phantoms. These high-fidelity models were directly employed in: fundamental biomechanical studies to visualize dissection propagation; advanced surgical training for complex procedures like ex vivo fenestration; emergency preoperative planning, where a patient-specific model was delivered in under 30 h; and industrial medical device testing using parametric, ISO-compliant models. In each scenario, the phantoms provided functional, anatomically accurate representations suitable for the intended evaluation-whether physical testing, surgical rehearsal, or hydrodynamic assessment. In summary, the HAMP demonstrates a rapid virtual-to-physical prototyping workflow. By enabling the on-demand creation of complex, multi-material, patient-specific phantoms, it provides a versatile tool that bridges digital data and physical reality, addressing needs across research, clinical training, and device development.