
This paper examines the potential of Italian depleted gas reservoirs, particularly in the offshore Adriatic Sea region, for CO2 geological sequestration. A pairing publication will explore the option of converting these reservoirs into hydrogen storage sites. The relevant field data were taken from publicly available sources and categorized into main scenarios. Sensitivity analyses were performed on a set of simplified yet representative cases, varying the reservoir depth and volume, as well as the size of the confining aquifer. A 3D geological (static) model was set up for each scenario: the structural trap was assumed to be an anticline, and the reservoir made of turbiditic deposits. The geological models served as the input for 3D coupled geochemical-fluid flow (dynamic) numerical models, used for the simulation of the conversion of depleted gas reservoirs into CO2 storage facilities. The mineralogic composition of the reservoir rock and the chemical composition and pH of the formation water were taken from the literature. After reproducing the natural gas production phase, CO2 injection was simulated. Storage capacity and injectivity of the reservoirs, as well as the CO2 geochemical interactions over time, were assessed to identify the most promising reservoir characteristics. The storage safety issues, including the geomechanical response induced by underground CO2 injection, were not addressed as they were beyond the scope of the work.
This paper examines the use of Global Navigation Satellite System (GNSS) technologies for Structural Health Monitoring (SHM) of strategic structures, with particular attention to offshore installations and critical infrastructure. The study reviews current GNSS methodologies for structural monitoring, analysing both static and kinematic positioning techniques, including Real-Time Kinematic (RTK) and Precise Point Positioning (PPP). The integration of multi-constellation GNSS data for enhanced monitoring accuracy is discussed through examples from offshore wind turbines and marine platforms, where traditional monitoring systems often face practical and environmental constraints. Results reported in the literature show that GNSS-based monitoring systems can achieve millimetre-level displacement accuracy while maintaining continuous operation even in demanding conditions. Technical issues such as multipath effects and atmospheric interference are typically mitigated through advanced filtering procedures and sensor-integration strategies. Overall, the review suggests that GNSS-based SHM represents a viable option for continuous structural assessment, particularly in environments where conventional instrumentation is difficult to deploy. The analysis aims to support the development of improved monitoring approaches for the management and maintenance of critical infrastructure.
In December 2023, a rockfall of approximately 25,000 m3 disrupted traffic along the SS52 bis highway, under the jurisdiction of Anas S.p.A., at the Monte Croce Carnico Pass-an important international mountain crossing connecting Italy and Austria. The geological assessment made it possible to determine the magnitude of the event and to identify the most effective technical solution to ensure the safety of personnel and the timely reopening of the route. The site underwent slope stabilization works, removal of unstable rock masses using explosives, and the installation of high-performance rockfall barriers with a Maximum Energy Level (MEL) of 11,178 kJ marking their first deployment in Italy. The works were completed with the installation of a slope-mounted monitoring system, impact sensors on the falling rock protection kits, and a ground-based radar scanning system for the entire slope.
Caprock sealing capacity is a fundamental aspect of the safe implementation of underground gas storage systems, which serve as a foundational solution for the decarbonization of the energy matrix and the transition toward a new and more sustainable energy mix. This study implemented a multidisciplinary approach combining laboratory tests and numerical simulations for the investigation of the sealing efficiency of the caprock. Different core samples from a reference formation (Scioto Sandstone) were investigated via routine core analyses for the determination of porosity and absolute permeability, and their characterization was complemented by data from technical literature. A series of step-by-step laboratory tests were performed to measure the breakthrough pressure (i.e. threshold pressure) for the quantification of the sealing efficiency: the focus was on the influence of the temperature and the length of the core samples on the test results. Furthermore, the lab tests were reproduced via numerical simulations in COMSOL Multiphysics (R) to obtain a full understanding of the phenomenon from theoretical and experimental views. The laboratory tests showed a negligible effect of temperature on the measured threshold pressure, whereas the influence of sample length on this value remains uncertain due to the counteracting effect of increased permeability in the longer core sample. The numerical simulations were able to reproduce, with some limitations, the key results of the laboratorytests.
Water in tunnels represents a challenge in any geological condition. When dealing with cohesive material, this aspect might bring additional problems linked to the low permeability, which does not allow effective and quick drainage to stabilize the ground around the tunnel. Ordinary drainage systems are an effective method, especially in higher permeability grounds, but these are losing efficacy in soft clays. This paper focuses on an innovative technique for stabilizing the tunnel face and surrounding ground by using a special soil nail consisting of a fiberglass bar element and an external sheath devised to contain the injected grout, which can also be integrated with a coaxial drain. The advantage of this technique is not only a decrease in the pore water pressure but also an increase of cohesion and elastic modulus over time thanks to the induced consolidation process of the clay and a consequent improvement of the mechanical characteristics.