
This paper reviews research advances in pollutant emissions control via various NTP-assisted ap-proaches during combustion,with a particular focus on their impacts on NOx and dioxin mitigation.Firstly,the mechanism by which radicals(e.g.,O,H,OH)generated by NTP influence the combustion process is intro-duced.Secondly,the application of NTP technology in gaseous,solid,and liquid fuel combustion is analyzed,along with the effects of parameters such as voltage and power on NOx emissions and the associated reaction kinet-ics mechanisms.Thirdly,the degradation mechanisms of dioxins and their precursors during solid waste combus-tion,mediated by radicals such as OH,H,and O generated by NTP,are summarized.Finally,the effects of NTP on ignition delay time and combustion efficiency during ignition and combustion are discussed.In general,NTP-assisted combustion is a highly promising technology,and it will play a significant role in enhancing the solid wastes'combustion efficiency and reducing emissions of pollutants such as NOx and dioxins.
A study was conducted on the combustion and emission characteristics of a gas turbine fueled by natural gas at a high hydrogen-blending ratio.Based on the Reynolds stress model(RSM)and non-premixed combustion model,the impact of different hydrogen-blending ratios(volume fraction αH2=0-0.8,five groups in total)on the performance of a can-type combustor was analyzed under constant fuel mass flow.The results show that when the hydrogen-blending ratio increases to 0.8,the internal flow velocity of the combustor rises,but the area of the central recirculation zone is compressed.The maximum internal temperature,wall temperature,and outlet tem-perature of the combustor all increase,with the flame width in the central region expanding and the outlet tempera-ture uniformity improving(outlet temperature distribution factor decreases by approximately 24%).CO2 emissions are reduced by 36.95%,while H2O and NOx emissions increased significantly.This study can serve as a reference for the design and operation of hydrogen-blended gas turbines.
Aiming at a mmonia's high ignition energy and low combustion rate,an active pre-chamber-type am-monia-hydrogen engine combustion system was designed and developed.The influence of injection/ignition match-ing strategies on engine combustion characteristics under jet ignition mode was numerically investigated.The re-sults indicate that the"inject-before-ignite"strategy with a shorter injection-ignition interval delivers optimal com-bustion performance(combustion duration of 26.5 ℃A,indicated thermal efficiency of 43.7%).This is attributed to the pronounced concentration stratification formed in the pre-chamber,which facilitates the formation and de-velopment of flame kernels,enhances the combustion-promoting efficacy of jet ignition,and thereby improves the indicated thermal efficiency.However,higher combustion temperatures in the cylinder lead to the increased NOx emissions in high-temperature oxygen-rich zones,while N2O formation due to low-temperature accumulation remains relatively low.
Experiments on laminar jet diffusion flames were conducted aboard China's Space Station under varying fuel flow rates and ambient oxygen concentrations(21%—30%).Measurements of flame morphology and the dis-tributions of OH* and CH* was obtained.By combining these data with numerical simulations,the flame charac-teristics under different operating conditions were analyzed,along with and the influencing mechanisms of ambi-ent oxygen concentration and fuel flow rate on flame morphology.The results show that as the fuel flow rate gradu-ally increases,the flame morphology undergoes a transition from hemispherical to conical and finally cylindrical.An excessively large flame radiation fraction is the primary reason for flame opening at the tip,while an increase in ambient oxygen concentration promotes the closure of the flame tip.Compared to normal gravity,flames in microgravity exhibit lower flow velocities,which leads to higher flame radiation and lower flame temperature.
This study investigates the scientific and practical feasibility of coal slime co-combustion through ther-mogravimetric analysis(TGA)and numerical simulation.First,combustion characteristic parameters were deter-mined for 15 types of bituminous and lignite coals,as well as two types of coal slime samples,each prepared with ten different moisture contents,under varying heating rates and particle sizes.The analysis quantitatively revealed that the moisture content of 30%serves as a critical threshold for slime combustion characteristics,beyond which combustion performance drops significantly by 30.50%—45.65%.Under this threshold,co-combustion experiments with slime and nine bituminous coals identified an optimal slime blending ratio of 10%.To address the limited research on slime application in opposed-fired boilers,a 600 MW π-type single-furnace,one-time intermediate reheat boiler was selected for validation.The test results within an error range of 6%were consis-tent with the simulation results.The study found that the introduction of coal slime can reduce the generation of NOx,but if the co-combustion ratio is too high,it will cause local excessive SO2.Overall,the recommended co-combustion ratio of coal slime under the 100%BMCR condition is 10%.Relevant data can provide a good reference for the co-combustion of coal slime.