
The available literature primarily focuses on developing alternative seaming techniques for waterproof garments to address needle holes created during stitching. However, these methods are not sustainable and present limitations, such as higher production costs, compatibility issues, adverse effects on fabric properties and user comfort. This study aims to optimize sewing parameters to improve the waterproof characteristics of seams without relying on alternative techniques. Needle size, thread size, and stitch density are the sewing parameters selected for the study. The research assesses the individual and interactive effects of these parameters on hydrostatic pressure resistance using the Box–Behnken Design (BBD) framework within the Response Surface Methodology (RSM) framework. The findings show that larger needle sizes reduce water resistance, which can be mitigated using higher stitch densities and larger thread sizes. Higher stitch densities also create tighter seam structures, significantly reducing water leakage. These results, validated through regression modeling and surface plot analysis, confirm that stitching effectively improves the seam’s waterproof characteristics by selecting the right sewing parameters. This study provides valuable insights into optimizing traditional stitching techniques to create waterproof seams.
The Indian plus-size clothing market is experiencing remarkable growth, driven by increasing obesity prevalence and the body positivity movement. However, this growth is paralleled by a concerning trend - a high rate of returns for online clothing purchases. The primary reason for returns is often the improper clothing fit, stemming from a lack of consideration for diverse body types. This study addresses this challenge by understanding the diversity of body shapes prevalent in various Indian regions. Pan-India data from the INDIAsize project and modified FFIT mathematical formulas were used to identify nine body shapes. The frequency distribution and Chi-square analysis revealed significant variations in body shape distribution across six regions. The findings provide valuable insights for Indian fashion brands to reduce returns and promote sustainable fashion practices. The research emphasizes the importance of aligning clothing styles with the prevalent body shapes in specific regions, contributing to a more sustainable fashion industry.
This study aimed to assess ergonomic risks in the garment industry's finishing department using rapid entire body assessment (REBA) among ready-made garment workers in India. This study evaluates ergonomic risks associated with work-related musculoskeletal issues (WMSDs), mainly on the lower back, neck, and limbs, and explores the impact of body mass index (BMI) on posture. A convenience sampling study included 35 employees (male, 23; female, 12; age, >18 years) at a garment unit in Kolkata, India. Data were collected through observation, video, and photo analysis using Kinovea software. The respondents had a mean age of 40.14 years (SD = 8.96) and mean BMI of 24.73 kg/m2 (SD = 2.96). The study revealed a statistically significant relationship between BMI and head and neck flexion angles across operations (p-values: ironing - head: 0.007, neck: 0.01; quality checking - head: 0.004, neck: 0.004; packing - head: 0.001, neck: 0.006; thread trimming - head: 0.001, neck: 0.01; stain removal - head: 0.001, neck: 0.02). The study revealed a high prevalence of musculoskeletal disorders among Indian garment finishing operators due to awkward postures and prolonged standing, evident in the medium to high-risk REBA scores. The Application lies in understanding the relationship between BMI, head/neck flexion angles, and occurrence of musculoskeletal problems which helps to design better workplace environments for garment finishing workers in India.
This paper is the third of a series of publications that deal with the development of seamless woven garments with desired shapes and sizes by producing woven tubular fabrics with differential shrinkage along the garment length. The first paper [1] focus was to produce the shape using filling yarns containing spandex at strategic places along the garment. The differential shrinkage between the regions with filling yarns containing spandex and those do not contain spandex allowed the development of garments with target shape and size. Six garments were produced using this concept with one warp (one on-loom fabric width). In the second paper [2], we demonstrated how to develop seamless garments with desired shape and size using the data of wide range of fabrics produced with different construction parameters and hence finished fabric shrinkage using one on-loom width. The seamless garments demonstrated in the first two papers exhibited intentional gathering and pleating due to high differential shrinkage between different parts of the garment. While the gathering and pleating provide intricacy to the garments, there is demand for garments without gathering. This paper addresses design and development of seamless woven garments with different shapes and sizes without darts, pleats or gathers to fit the bodyline using data obtained from 83 pre-produced tubular woven fabrics with different construction parameters that influence finished width shrinkage. The 83 tubular woven fabrics were intentionally structured to provide extremely wide range of shrinkage range (6.7% & 48.7%). This allowed the creation of garments with required shape using different fabrics with gradual differential shrinkage along garment length. Six seamless garments with desired shape and sizes (Small, Medium, Large, and X Large) were designed using this technique.
Reports of bullet injuries to firefighters and emergency medical technicians (EMTs) are often found in media reports and firefighter periodicals. There are also several incidents where firefighters were shot and killed in emergency situations (e.g. domestic violence, civil unrest, active shooter scenarios, etc.) that don’t include fire. First responders must, therefore, be appropriately equipped with ballistic vests to execute multidisciplinary missions that go against the single-discipline paradigms. This paper presents the results of a survey conducted on the current use of ballistic vests by firefighters and Emergency Medical Services (EMS) personnel in North America. The survey results provide information on the types of ballistic vests typically worn, deployment practices, levels of ballistic protection and training practices for firefighters. This paper describes how ballistic vests are worn with turnout gear and identifies the need to consider the effects of wearing ballistic vests on heat strain, interoperability of firefighter gear, as well as potential flammability issues and exposures to thermal threats from flammable materials.