
Pakistan's water-related problems, such as severe floods, severe droughts, and the depletion of freshwater supplies, have gotten worse due to climate change. The 2022 floods underscored Pakistan's vulnerability to climate-induced disasters, resulting in significant human and economic losses. Innovative, technologically advanced solutions that improve climate resilience and water security are needed to address these issues. This paper explores the role of technological innovations, such as early warning systems, smart water management, advanced water treatment, structural flood resilience, and community-based technologies, in mitigating water-related risks and ensuring sustainable resource management. In addition to highlighting how these innovations could support global frameworks such as the Paris Accord and the Sustainable Development Goals (SDGs), the report also identifies obstacles to their implementation, such as governance, technical, and budgetary issues. In order to scale up these solutions, policy proposals emphasize the significance of community involvement, public-private partnerships, and international cooperation. Pakistan can create a resilient water future by incorporating these technologies into national strategies, especially through programs like the China-Pakistan Economic Corridor (CPEC). This study emphasizes how urgently more funding, research, and cooperation are needed to address the increasing effects of climate change on water security.
The aim of this study is to assess the effectiveness of a hybrid Floating Treatment Wetland (FTW) for the treatment of municipal wastewater by using Phragmites australis and Canna indica. Prior to the installation of the FTW, initial testing was conducted to identify the pollutant of interest. The performance of this system was monitored by analyzing the parameters mentioned above during the months of April to August. Throughout each phase, the system demonstrates high removal efficiency for the majority of parameters. Two way Anova was performed for multiple comparison between different phases and locations. The mature phase showed the maximum removal efficiency, with BOD 91%, COD 91% TSS 88%, TDS 48%, Total ammonia 75% nitrate 68%, phosphate 70%. The addition of a settling tank in the treatment process has proven to enhance efficiency, as it demonstrates effective removal of TSS, turbidity, and COD. This indicates that the implementation of primary treatment contributes to the overall efficiency of the FTW. The cost analysis showed that this system can treat 1m3 of wastewater with only 150 PKR which shows that this is cost effective technology. Therefore, the findings indicated that FTW has promise as a field-scale wastewater treatment method, offering a cost-effective technological solution. Moreover, it was recommended to investigate the long term potential of FTW on field scale.
Floods pose a significant threat to human life, infrastructure, and economic stability in developing nations like Pakistan, where a 1% increase in floods correlates with a 0.44% decrease in livelihood and a 1.947% rise in poverty levels. With approximately 20% of its land area and 40 million people exposed to flood risks annually, there is an urgent need for robust flood risk assessment tools. Effective flood vulnerability functions are essential for formulating data-driven disaster management policies and enhancing the flood resistance of buildings. However, existing global models fail to capture Pakistan’s unique flood dynamics, necessitating the development of localized models. This study synthesizes global methodologies and integrates secondary data to create reliable tailored flood vulnerability functions. The research reveals a non-linear relationship between flood depth and damage across various building materials, with mud structures experiencing 82.5% damage at 0.5 meters and complete failure at 1.5 meters, while concrete structures show only 3.5% damage at 0.5 meters and a maximum of 65.9% at 3 meters. Additionally, the study highlights that prolonged flooding increases damage by 30-50%. Recommendations include prioritizing reinforced concrete in construction and implementing comprehensive flood risk management plans to enhance structural resilience and community safety in flood-prone regions.
Flash flooding due to short duration and high-intensity rainfall is one of the main issues in Panjgur District, a western region of Balochistan in Pakistan. Check dams are often proposed for reducing flood peaks, and flood volumes, preventing soil erosion and harvesting the surface water. The selection of the most suitable sites for check dams within the stream network is always challenging. This study is performed to identify the geographical location of the check dams for a proposed dam. A watershed boundary was identified by using the Archydro tools in the Geographical Information System (GIS) for a proposed dam. For identifying the suitable locations of the check dam, Multi Criteria Decision Making Analysis (MCDMA) technique is used, in which, nine geomorphological and topo-hydrological parameters (Drainage Density, Land use/Land cover, Stream Order, Topographic Wetness Index, Topographic Position Index, Slope, Terrain Ruggedness Index, Topographical Wetness Index, Stream Power Index, and Sediment Transport Index) were analyzed and classified using GIS. The weightage factor is assigned to each parameter. By using the Weighted Linear Combination (WLC) method, the locations of the check dams are identified. The results showed that the elevation changes from 1047 to 2058m covering an area of 4458.75km² in the proposed dam watershed. The slope ranges from 0ᵒ to 59.63ᵒ. The majority of the study area fell into quality zones with moderate to good potential for check dam construction. Based on the findings, 137 suitable locations for the check dams are identified. This study will help policymakers in the Panjgur District for the sustainable management of water management by expanding their understanding of the role of spatial data analysis.
Barrages are used to divert the required water into canals and their design is said to be compromised if the required discharging capacity is reduced. In 2008, to restore tailwater levels, a sub weir was constructed downstream of Taunsa barrage, Pakistan. However, during 2010, the barrage didn’t pass its design flow and consequently its left marginal bund was breached. This study aims to investigate the effects of sub weir on the tailwater level, water heads, discharge coefficient and drowning ratio using FLOW-3D hydraulic models. The results indicated a maximum 15% rise in head water which further revealed an overestimation of water heads over the prototype sub weir. The analysis further indicated that from 12.09 to 24.19 m3/s/m discharge, the rate of change of waterheads over the sub weir was found to be declined. Upon comparison, the simulated coefficients of discharge were found to deviate from the observed discharge coefficient and the maximum error reached 36 % at 12.09 m3/s/m. The findings of this study highlight the necessity of thoroughly assessing the design, operational feasibility, and hydraulic performance of such weirs across various discharge conditions to ensure their sustainability, particularly during extreme flood events.