Biodegradation of natural silk scaffolds made from gauze and satin fabrics was studied both in vitro and in vivo. Experiments were conducted using phosphate-buffered saline (PBS) and Fenton's reagent to model degradation. Samples demonstrated high stability in the model of physiological conditions and varying degradation rates in oxidative stress. In vivo studies in rats showed good biocompatibility of the scaffolds and a gradual reduction in inflammatory responses. The findings highlight the potential of silk scaffolds for use in various areas of regenerative medicine.

The authors consider current ways of studying the 3D nanostructure of biomaterials and biological objects based on scanning probe nanotomography-a combination of fluorescence microscopy, probe microscopy, and ultramicrotomy. Results are presented from experiments to study the 3D nanostructure of composite scaffolds based on Bombyx mori silk fibroin and microparticles of an extracellular matrix obtained from decellularized liver tissue. Such scaffolds have great potential for using in regenerative medicine. It is shown that probe nanotomography allows effective analysis of the 3D nanostructure of microinclusions and their morphological parameters that influence the biological activity of products.

Предложен метод 3D-TIRF-микроскопии, основанный на объединении методик ультрамикротомии и флуоресцентной микроскопии полного внутреннего отражения поверхности образца после среза и позволяющий реконструировать трехмерную ультраструктуру объектов.

Silk is becoming one of the key materials in contemporary bioengineering and medicine due to its unique physicochemical and biological properties. This review article discusses the main components of silk, fibroin and sericin, their structure and functional characteristics, as well as their importance in the production of biocompatible and biodegradable materials. Modern methods of modifying silk to enhance its mechanical and biological properties are considered, including physical, chemical, and genetic manipulation. The use of silk in tissue engineering, development of medical implants, controlled drug delivery systems, and biosensors is given particular consideration. In conclusion, the prospects for further silk research targeted at creating innovative biomaterials for medical applications are discussed.

Modern biomedical research often requires a three-dimensional microscopic analysis of the ultrastructure of biological objects and materials. Conceptual technical and methodological solutions for three-dimensional structure reconstruction are needed to improve the conventional optical, electron, and probe microscopy methods, which to begin with allow one to obtain two-dimensional images and data. This review discusses the principles and potential applications of such techniques as serial section transmission electron microscopy; techniques based on scanning electron microscopy (SEM) (array tomography, focused ion beam SEM, and serial block-face SEM). 3D analysis techniques based on modern super-resolution optical microscopy methods are described (stochastic optical reconstruction microscopy and stimulated emission depletion microscopy), as well as ultrastructural 3D microscopy methods based on scanning probe microscopy and the feasibility of combining them with optical techniques. A comparative analysis of the advantages and shortcomings of the discussed approaches is performed.

The effect of recombinant spidroin (RS) hydrogel (HG) on anterior epithelial cells and keratocytes of the human cornea was studied in vitro. Corneal injuries are highly prevalent in developing countries according to the World Health Organization. Various technologies have recently been proposed to restore the damaged surface of the cornea. Use of biodegradable silk-based materials, including recombinant analogs of the spider silk protein spidroin, is an important avenue of research in the field of wound healing and corneal regeneration. Spidroins are well known for their optimal balance of strength and elasticity. Given their biological compatibility, lack of immunogenicity, and biodegradability, spidroins provide a biomaterial for tissue engineering and regenerative medicine. HGs based on RS rS2/12-RGDS were therefore tested for cytotoxicity toward isolated corneal epithelial cells and keratocytes with regard to possible changes in cell phenotype and migratory activity. A promising outlook and therapeutic potential were demonstrated for RS-based HGs.

Developing technologies for efficient targeted drug delivery for oncotherapy requires new methods to analyze the features of micro- and nanoscale distributions of antitumor drugs in cells and tissues. A new approach to three-dimensional analysis of the intracellular distribution of cytostatics was developed using fluorescence scanning optical-probe nanotomography. A correlative analysis of the nanostructure and distribution of injected doxorubicin in MCF-7 human breast adenocarcinoma cells revealed the features of drug penetration and accumulation in the cell. The technology is based on the principles of scanning optical probe nanotomography and is applicable to studying the distribution patterns of various fluorescent or fluorescence-labelled substances in cells and tissues.

Nanoscale morphological features of branched processes of glial cells may be of decisive importance for neuron–astrocyte interactions in health and disease. The paper presents the results of a correlation analysis of images of thin processes of astrocytes in nervous tissue of the mouse brain, which were obtained by scanning probe microscopy (SPM) and transmission electron microscopy (TEM) with high spatial resolution. Samples were prepared and imaged using a unique hardware combination of ultramicrotomy and SPM. Astrocyte details with a thickness of several tens of nanometers were identifiable in the images, making it possible to reconstruct the three-dimensional structure of astrocytic processes by integrating a series of sequential images of ultrathin sections of nervous tissue in the future.

The development of effective biomedical technologies using magnetic nanoparticles (MNPs) for the tasks of oncotherapy and nanodiagnostics requires the development and implementation of new methods for the analysis of micro- and nanoscale distributions of MNPs in the volume of cells and tissues. The paper presents a new approach to three-dimensional analysis of MNP distributions - scanning magnetic force nanotomography as applied to the study of tumor tissues. Correlative reconstruction of MNP distributions and nanostructure features of the studied tissues made it possible to quantitatively estimate the parameters of three-dimensional distributions of composite nanoparticles based on silicon and iron oxide obtained by femtosecond laser ablation and injected intravenously and intratumorally into tumor tissue samples of B16/F1 mouse melanoma. The developed technology based on the principles of scanning probe nanotomography is applicable for studying the features of three-dimensional micro- and nanoscale distributions of magnetic nanoparticles in biomaterials, cells and tissues of various types.

The development of advanced biomaterials and constructs for accelerated recovery of damaged tissues is a key direction in regenerative medicine. Biocompatible scaffolds based on natural biopolymers are widely used for these tasks. Organ decellularization enables obtaining a cell-free extracellular matrix (ECM) with preserved composition and biological activity. The objectives of the present work were combining these two approaches for the development of a composite scaffold based on silk fibroin and ECM microparticles and assessing its structure, biological properties, and regenerative potential. ECM microparticles were obtained by grinding the decellularized matrix of Wistar rat liver in liquid nitrogen. Scaffolds in the form of films were prepared by the casting method. The sinuous and rough topography of the scaffold surface was assessed by the scanning probe nanotomography (SPNT) technique. The inclusion of ECM microparticles in the composition did not affect the elasticity and tensile strength of the scaffolds. The obtained scaffold was non-toxic to cells, maintained high levels of adhesion and proliferation of mouse 3T3 fibroblast and Hep-G2 cells, and showed high regenerative potential, which was studied in the experimental model of full-thickness rat skin wound healing. The wound healing was accelerated by 1.74 times in comparison with the control.

The main goal of our research was to fabricate electrospun scaffolds from three different silk proteins—silk fibroin from Bombyx mori silkworm cocoons and two recombinant spidroins, rS2/12 and rS2/12-RGDS—and to perform a comparative analysis of the structure, biological properties, and regenerative potential of the scaffolds in a full-thickness rat skin wound model. The surface and internal structures were investigated using scanning electron microscopy and scanning probe nanotomography. The structures of the scaffolds were similar. The average fiber diameter of the scaffolds was 315 ± 26 nm, the volume porosity was 94.5 ± 1.4%, the surface-to-volume ratio of the scaffolds was 25.4 ± 4.2 μm−1 and the fiber surface roughness was 3.8 ± 0.6 nm. The scaffolds were characterized by a non-cytotoxicity effect and a high level of cytocompatibility with cells. The scaffolds also had high regenerative potential—the healing of the skin wound was accelerated by 19 days compared with the control. A histological analysis did not reveal any fragments of the experimental constructions or areas of inflammation. Thus, novel data on the structure and biological properties of the silk fibroin/spidroin electrospun scaffolds were obtained.

The obtaining of microcarriers for the cell culture and delivery is an urgent task of tissue engineering and regenerative medicine. The novel method of surface modification of alginate microcarriers in the form of microspheres with a diameter of 200–300 μm was developed. The described method consists in covalent crosslinking between collagen and surface of alginate microcarriers. It was shown that the method makes it possible to completely modify the surface of the alginate microcarrier, which can be used to improve the biological properties of the microcarrier. Such microcarriers with improved biological properties can be considered as effective systems for cell delivery and culture.

A comparative analysis of the structure and biological properties of silk fibroin constructions was performed. Three groups of constructions were obtained: films obtained by casting an aqueous solution of silk fibroin and electrospun microfibrous scaffolds based on silk fibroin, with the addition of 30% gelatin per total protein weight. The internal structures of the films and single fibers of the microfibrous scaffolds consisted of densely packed globule structures; the surface area to volume ratios and volume porosities of the microfibrous scaffolds were calculated. All constructions were non-toxic for cells and provide high levels of adhesion and proliferation. The high regenerative potential of the constructions was demonstrated in a rat full-thickness skin wound healing model. The constructions accelerated healing by an average of 15 days and can be considered to be promising constructions for various tasks of tissue engineering and regenerative medicine.

Creation of new effective bio-artificial structures for tissue engineering and regenerative medicine requires development and implementation of new technological approaches for analysis of micro- and nanostructural features of constructs based on biomaterials and their interaction with cells. A new method of three-dimensional multiparametric analysis of nanostructure, scanning optical probe nanotomography, is presented in this paper, applied to the analysis of cells and biomaterials. Correlative reconstruction of fluorescent marker distributions and nanostructure features allows quantitative evaluation of a number of parameters of three-dimensional nanomorphology of fibroblasts and human hepatocarcinoma cells Hep-G2, adhered to biodegradable scaffolds based on silk fibroin. The developed technology with use of scanning optical probe nanotomography is applicable to investigation of three-dimensional micro- and nanostructure features of biomaterials and cells of different types.

Corneal injury due to ocular trauma or infection is one of the most challenging vision impairing pathologies. The aim of the work was to study the effect of biodegradable silk fibroin-based scaffolds containing GDNF on the corneal regeneration process. During cultivate the highest keratocytes proliferative activity was registered with scaffolds containing 250 ng/ml and 500 ng/ml GDNF. In mice with an experimental model of epithelial-stromal damage to the cornea, silk fibroin-based scaffolds containing GDNF in various concentrations were used (in groups 1, 2 and 3 silk fibroin-based scaffolds containing GDNF in a concentration of 50 ng/ml, 250 ng/ml and 500 ng/ml, respectively; in group 4 - silk fibroin-based scaffolds without GDNF; in group 5 - a solution of GDNF with concentration of 500 ng/ml; group 6- control). The area of the corneal epithelial defect in groups 2, 3, and 5 was less than in the other groups. The most pronounced positive immunohistochemical reaction with antibodies to Bcl2, Bax, phosphoERK1/2 and phospho-JNK1/2, Ki67, Gap43 was observed in groups 2 and 3. Thus, silk fibroin-based scaffolds with GDNF stimulate the epithelialization process, proliferative activity of epithelial cells and keratocytes, accelerate the formation of the stromal nerve plexus and exhibit anti-apoptotic activity.

Organ decellularization is one of the promising technologies of regenerative medicine, which allows obtaining cell-free extracellular matrix (ECM), which provide preservation of the composition, architecture, vascular network and biological activity of the ECM. The method of decellularization opens up wide prospects for its practical application not only in the field of creating full-scale bioengineered structures, but also in the manufacture of vessels, microcarriers, hydrogels, and coatings. The main goal of our work was the investigation of structure and biological properties of lyophilized decellularized Wistar rat liver fragments (LDLFs), as well as we assessed the regenerative potential of the obtained ECM. We obtained decellularized liver of a Wistar rat, the vascular network and the main components of the ECM of tissue were preserved. H&E staining of histological sections confirmed the removal of cells. DNA content of ECM is equal to 0.7% of native tissue DNA content. Utilizing scanning probe nanotomogrphy method, we showed sinuous, rough topography and highly nanoporous structure of ECM, which provide high level of mouse 3T3 fibroblast and Hep-G2cells biocompatibility. Obtained LDLF had a high regenerative potential, which we studied in an experimental model of a full-thickness rat skin wound healing: we observed the acceleration of wound healing by 2.2 times in comparison with the control.

Objective: to analyze the 3D micro- and nanostructure and quantitative morphological parameters of rat lung tissue. Materials and methods. Wistar rat lung tissue samples were obtained for the study. The 3D structure of the lung tissue was studied via scanning probe nanotomography using an experimental setup combining an ultramicrotome and a scanning probe microscope. Results. Nanoscale images and 3D nanotomographic reconstructions of the interalveolar septal sections of the rat lung were obtained. Morphological parameters (average roughness and specific effective area) of the interalveolar septal surface were determined. It was found that the average roughness of the reconstructed septal surface was 345.4 ± 24.5 nm, and the specific effective area was 2.7 ± 0.2 units. Conclusions. Results obtained demonstrate that scanning probe nanotomography allows to quantify lung morphology. The use of scanning probe nanotomography for 3D analysis of the structure and characteristics of lung tissue will increase the efficiency of future developments on creation of new criteria for diagnosing pathological conditions.