Modulation of heterogeneous catalyst structure is ubiquitous within efforts to improve catalytic activity and selectivity at the molecular level. Herein, manganese oxide (MnO2) is employed as a continuously tunable catalyst support through increasing extent of lithium intercalation and reduced surface potential. Oxidative grafting of an organocopper complex onto various lithium manganese oxides (LixMn2O4, x = 0-2.1) produced divalent and monovalent copper species on the partially reduced (0 <= x <= 1.2) and fully reduced (x = 2.1) surfaces, respectively, as determined by X-ray absorption fine structure (XAFS) analysis. The resultant materials are catalytically active for the oxidative coupling of terminal alkynes, with steady-state reaction rate data of oxidative propyne dimerization (200 degrees C, 0.6-2.4 kPa propyne, 2.4-9.9 kPa O-2) indicating that complete support lithiation (Li2.1Mn2O4) provides increased catalytic performance and renders reoxidation steps less kinetically demanding compared to the unreduced parent material. Enacting a dual site (Cu and MnOx) kinetic model can account for dimerization rates measured over Cu/Li2.1Mn2O4 under various reactant concentrations, copper loadings, and surface coverages, providing supporting evidence for the synergistic role of the metal and support in facilitating the coupling reaction. Overall, results presented here provide an extension for general strategies of systematically controlling catalytic structure and function through lithium reduction of bulk oxides and subsequent electronic modulation of the metals supported thereon.

The development of new methods of catalyst synthesis with the potential to generate active site structures orthogonal to those accessible by traditional protocols is of great importance for discovering new materials for addressing challenges in the evolving energy and chemical economy. In this work, the generality of oxidative grafting of organometallic and well-defined molecular metal precursors onto redox-active surfaces such as manganese dioxide (MnO2) and lithium manganese oxide (LiMn2O4) is investigated. Nine molecular metal precursors are explored, spanning groups 4-11 and each of the three periods of the transition metal series. The byproducts of the oxidative grafting reaction, a mixture of protodemetalation and ligand homocoupling for several organometallic precursors, was found to provide insights into the mechanism of the grafting reaction, suggesting oxidation of both the metal d-orbitals, as well as the metal-carbon σ-bonds, resulting in ejection of the ligand radical fragment. Analysis of the supported structures and oxidation state by X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS) suggests that several of the chemisorbed metal ions are intercalated into interstitial vacancies of the surface structure while other complexes form intact molecular fragments on the surface. Proof of concept for the use of this metalation protocol to generate diverse, metal-dependent catalytic performance is demonstrated by the application of these materials in the conversion of cyclohexane to K/A oil (cyclohexanol and cyclohexanone) with tert-butyl hydroperoxide, as well as in the low-temperature (T ≤ 50 °C) oxidation of carbon monoxide to carbon dioxide.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

The tunability in structure and chemistry makes the metal-organic framework (MOF) a versatile platform for catalytic study. The framework can be either the catalyst itself or the support for the catalyst. Benefiting from the crystalline and porous nature of MOFs, these catalytic sites usually have well-defined structures, which makes structure characterization by crystallographic tools more applicable. The structure analysis feedbacks the targeting synthesis for the groups synthesizing the catalysts and provides reliable models for the groups studying the mechanism by computation. In this poster, we present the works collaborating within the previous ICDC, including the ex situ pair distribution function (PDF) and differential envelope density (DED) analysis, in situ scattering measurement under various sample environments, and the statistic tools developed for data analysis, as well as the supporting analysis works we can do for other groups in the coming CD4DC.

Understanding heterogeneous catalysts is a challenging pursuit due to surface site nonuniformity and aperiodicity in traditionally used materials. One example is sulfated metal oxides, which function as highly active catalysts and as supports for organometallic complexes. These applications are due to traits such as acidity, ability to act as a weakly coordinating ligand, and aptitude for promoting transformations via radical cation intermediates. Research is ongoing about the structural features of sulfated metal oxides that imbue the aforementioned properties, such as sulfate geometry and coordination. To better understand these materials, metal-organic frameworks (MOFs) have been targeted as structurally defined analogues. Composed of inorganic nodes and organic linkers, MOFs possess features such as high porosity and crystallinity, which make them attractive for mechanistic studies of heterogeneous catalysts. In this work, Zr6-based MOF NU-1000 is sulfated and characterized using techniques such as single crystal X-ray diffraction in addition to diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The dynamic nature of the sulfate binding motif is found to transition from monodentate, to bidentate, to tridentate depending on the degree of hydration, as supported by density functional theory (DFT) calculations. Heightened Brønsted acidity compared to the parent MOF was observed upon sulfation and probed through trimethylphosphine oxide physisorption, ammonia sorption, in situ ammonia DRIFTS, and DFT studies. With the support structure benchmarked, an organoiridium complex was chemisorbed onto the sulfated MOF node, and the efficacy of this supported catalyst was demonstrated for stoichiometric and catalytic activation of benzene-d6 and toluene with structure-activity relationships derived.

The development of general strategies for the electronic tuning of a catalyst’s active site is an ongoing challenge in heterogeneous catalysis. To this end we report the application of cathode and anode materials as redox non-innocent catalyst supports that can be continuously modulated as a function of lithium intercalation. A zero valent nickel complex was oxidatively grafted onto the surface of lithium manganese oxide (LixMn2O4) to yield single-sites of Ni2­+ (Ni/LixMn2O4). Its activity for olefin hydrogenation was found to be a function of the redox state of the support material, with the most lithiated variant showing the most activity. X-ray absorption, X-ray photoelectron, solid-state nuclear magnetic resonance and electron paramagnetic resonance spectroscopies, and electron microscopy techniques established the nature of the nickel species on LixMn2O4. Catalyst control through support redox non-innocence was extended to an organotantalum complex on lithium titanium oxide (LixTiO2), demonstrating the generality of this phenomenon.

A critical component in the reduction of CO2 to CO and H2O is the delivery of 2 equiv of protons and electrons to the CO2 molecule. The timing and sequencing of these proton and electron transfer steps are essential factors in directing the activity and selectivity for catalytic CO2 reduction. In previous studies, we have reported a series of macrocyclic aminopyridine cobalt complexes capable of reducing CO2 to CO with high faradaic efficiencies. Kinetic investigations reveal a relationship between the observed rate constant (kobs) and the number of pendant amine hydrogen bond donors minus one, suggesting the presence of a deprotonated active catalytic state. Herein, we investigate the feasibility of these proposed deprotonated complexes toward CO2 reduction. Two deprotonated derivatives, Co(L4-) and Co(L2-), of the tetraamino macrocycle Co(L) were independently synthesized and structurally characterized revealing extensive delocalization of the negative charge upon deprotonation. 1H nuclear magnetic resonance spectroscopy and ultraviolet-visible titration studies confirm that under catalytic conditions, the active form of the catalyst gradually becomes deprotonated, supporting thus the ndonor - 1 relationship with kobs. Electrochemical studies of Co(L4-) reveal that this deprotonated analogue is competent for electrocatalysis upon addition of an exogenous weak acid source, such as 2,2,2-trifluoroethanol, resulting in faradaic efficiencies for CO2-to-CO conversion identical to those observed with the fully protonated derivative (>98%).

Olefin metathesis is a broadly employed reaction with applications that range from fine chemicals to materials and petrochemicals. The design and investigation of olefin metathesis catalysts have been ongoing for over half a century, with advancements made in terms of activity, stability, and selectivity. Immobilization of organometallic complexes onto solid supports such as silica or alumina is a promising strategy for catalyst heterogenization, often resulting in increased activity and stability. Consequently, a broad range of early transition metal catalysts bearing alkyl, oxide/alkoxide, and amide ligands have been grafted onto silica and their reactivities investigated. Herein, we report a series of silica-supported tungsten and molybdenum dimers (X3M≡MX3, where M = W and Mo; X = neopentyl, tert-butoxide, and dimethyl amide) and their reactivities toward catalytic olefin metathesis. Dynamic nuclear polarization (DNP)-enhanced solid-state nuclear magnetic resonance (SSNMR), diffuse reflectance infrared Fourier transform (DRIFT), UV resonance Raman, and X-ray absorption (XAS) spectroscopies suggest that upon heterogenization the dimers bind to the surface in a monopodal fashion, with the M≡M triple bond remaining intact. These structural assignments were further corroborated by density functional theory (DFT) calculations. While the homogeneous dimer counterparts are inert, the supported low-valent alkyl W and Mo dimers become active for the disproportionative self-metathesis of propylene to ethylene and butenes and 4-nonene to 4-octene and 5-decene under mild conditions. The lack of activity observed for the free and supported tert-butoxide and dimethyl amide dimers likely suggests that the neopentyl groups are necessary for the formation of a putative alkylidene active species. The difference in reactivity between the free and supported dimers could be explained either by the lowering of the activation barrier of the complex through the electronic effects of the surface or by site isolation of catalytically relevant reactive intermediates.

The field of Surface Organometallic Chemistry (SOMC) aims to blend the positive attributes of homogeneous and heterogeneous catalysis. Significant insight into heterogeneous systems has been gained over the years through the synthesis, characterization, and application of well-defined surface organometallic catalysts, predominantly supported on silica and alumina. Considerable research efforts have focused on the application of homogeneous methods to the synthesis and characterization of these systems. Homogeneous catalysis has thrived on its ability to electronically and sterically tune ligands to yield desired reactivity and selectivity. Efforts in SOMC, however, have only recently turned to harnessing the stereoelectronic diversity of potential inorganic support materials beyond silica and alumina in order to exert similar control on the reactivity of the organometallic active site. The support material is intrinsically linked to electronic structure and reactivity of heterogeneous organometallic systems in the same way that ligands exert control over homogeneous catalyst systems. The ability to tune the reactivity of heterogeneous catalysts by changing the support is of great value, and it is anticipated that this will represent an area of significant growth in the field. In this Perspective, the use and future of nontraditional catalyst supports, such as sulfated metal oxides, modified silicas, and redox active supports are discussed.

The synthesis and investigation of multimetallic complexes bearing metal–metal bonds have been significantly advanced over the last 30 years with exciting applications across many fields. While the...

The design of effective electrocatalysts for carbon dioxide reduction requires understanding the mechanistic underpinnings governing the binding, reduction, and protonation of CO2. A critical aspect to understanding and tuning these factors for optimal catalysis revolves around controlling the electronic environments of the primary and secondary coordination sphere. Herein we report a series of para-substituted cobalt aminopyridine macrocyclic catalysts 2-4 capable of carrying out the electrochemical reduction of CO2 to CO. Under catalytic conditions, complexes 2-4, as well as the unsubstituted cobalt aminopyridine complex 1, exhibit icat/ip values ranging from 144 to 781. Complexes 2 and 4 exhibit a pronounced precatalytic wave suggestive of an ECEC mechanism. A Hammett analysis reveals that ligand modifications with electron-donating groups enhance catalysis (ρ < 0), indicative of positive charge buildup in the transition state. This trend also extends to the CoI/0 potential, where complexes possessing more negative E(CoI/0) reductions exhibit greater icat/ip values. The reported modifications offer a synthetic lever to tune catalytic activity, orthogonal to our previous study of the role of pendant hydrogen bond donors.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

The bioinspired incorporation of pendant proton donors into transition metal catalysts is a promising strategy for converting environmentally deleterious CO2 to higher energy products. However, the mechanism of proton transfer in these systems is poorly understood. Herein, we present a series of cobalt complexes with varying pendant secondary and tertiary amines in the ligand framework with the aim of disentangling the roles of the first and second coordination spheres in CO2 reduction catalysis. Electrochemical and kinetic studies indicate that the rate of catalysis shows a first-order dependence on acid, CO2, and the number of pendant secondary amines, respectively. Density functional theory studies explain the experimentally observed trends and indicate that pendant secondary amines do not directly transfer protons to CO2, but instead bind acid molecules from solution. Taken together, these results suggest a mechanism in which noncooperative pendant amines facilitate a hydrogen-bonding network that enables direct proton transfer from acid to the activated CO2 substrate.

We report here the synthesis of a novel dithiolate ligand framework with pendant ether groups. Metallation reactions were performed with nickel(II) precursors, in the presence of base, leading to a tetranuclear nickel(II) species, as evidenced by single crystal X-ray diffraction studies. A C-2v symmetric structure is observed, with the Ni-II centers in a square arrangement. Each Ni-II center is coordinated by four bridging thiolates. (C) 2016 Elsevier Ltd. All rights reserved.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

We report here the efficient reduction of CO2 to CO by cobalt aminopyridine macrocycles. The effect of the pendant amines on catalysis was investigated. Several cobalt complexes based on the azacalix[4](2,6)pyridine framework with different substitutions on the pendant amine groups have been synthesized (R = H (1), Me (2), and allyl (3)), and their electrocatalytic properties were explored. Under an atmosphere of CO2 and in the presence of weak Brønsted acids, large catalytic currents are observed for 1, corresponding to the reduction of CO2 to CO with excellent Faradaic efficiency (98 ± 2%). In comparison, complexes 2 and 3 generate CO with TONs at least 300 times lower than 1, suggesting that the presence of the pendant NH moiety of the secondary amine is crucial for catalysis. Moreover, the presence of NH groups leads to a positive shift in the reduction potential of the Co(I/0) couple, therefore decreasing the overpotential for CO2 reduction.