We investigated the effect of air humidity on two gold nanoparticle systems, one functionalized with an oligo(ethylene glycol) ligand, and one functionalized with a mixture of the same with a dimannoside ligand. The dimannoside ligand was chosen to mimic the surface chemistry of viral spike proteins. We characterized the particles by electron microscopy, dynamic light scattering, and infrared spectroscopy. We probed particles adsorbed on hydrophilic and hydrophobic surfaces with atomic force microscopy (AFM) and vibrational sum frequency generation (VSFG) spectroscopy, both operated under variable air humidity. For AFM, we additionally tested hydrophilic and hydrophobic tips. While VSFG indicated preferential hydration of the dimannoside and proved conformational changes in the organic ligands, AFM provided sub-nanometer changes in particle topography due to water adsorption. In general, the dimannoside nanoparticles condense ultrathin water layers upon humidity increase. In contrast, we found that the water adsorption on the oligo(ethylene glycol) particles depends little on humidity. Our insights into structural changes on glyconanoparticles and the hydration properties of glycosylated particles are of application value for biosensors and help model the transmission of airborne viruses, such as influenza.

Driven by deeper insights into their nanoscale properties, the role of metal silicides in nanotechnology has recently been redefined. A central challenge in this field is the development of new methods for the controlled synthesis of low‐dimensional silicides, whose promising properties are often theoretically predicted but remain difficult to validate experimentally. To address this challenge, area‐selective (AS) silicidation is introduced as a bottom‐up approach that enables precise control over the morphology of metal silicide crystals by engineering surface defects on the substrate. The process begins with ion‐beam patterning to create defects on Si(111) and Si(100) substrates, followed by the deposition of a thin metal oxide layer as the silicide precursor. Subsequent annealing in a hydrogen atmosphere reduces the oxide to metal, which then dewets and reacts with the silicon to form a silicide. Under these conditions, the silicide selectively nucleates and grows along the artificially introduced defects, which act as potential wells and determine the shape and positioning of the resulting structures. The effectiveness of AS‐silicidation is demonstrated by the synthesis of NiSi 2 and its extension to Cu 3 Si, illustrating the method's broad applicability to different silicides. This multistep process directly yields structured, low‐dimensional silicides, eliminating the need for post‐synthesis nanopatterning.

We prepared a small library of short peptidomimetics based on 3-pyrrolo-pyrazole carboxylate, a non-coded γ-amino acid, and glycine or alanine. The robust and eco-friendly synthetic approach adopted allows to obtain the dipeptides in two steps from commercial starting materials. This gives the possibility to shape these materials by electrospinning into micro- and nanofibers, in amounts required to be useful for coating surfaces of biomedical relevance. To promote high quality of electrospun fibers, different substitution patterns were evaluated, all for pure peptide fibers, free of any polymer or additive. The best candidate, which affords a homogeneous fibrous matrix, was prepared in larger amounts, and its biocompatibility was verified. This successful work is the first step to develop a new biomaterial able to produce pristine peptide-based nanofibers to be used as helpful component or stand-alone scaffolds for tissue engineering or for the surface modification of medical devices.

Ice-nucleation proteins (INPs) can facilitate ice growth more effectively than other known materials. In this work, we analyze the ice nucleation activity of ferritin, an intracellular protein produced by almost all living organisms that stores and releases iron. Ice nucleation from supercooled water was probed by differential scanning calorimetry (freezing and refreezing experiments). In addition, analysis of both surface charge and aggregation of ferritin were done by dynamic light scattering and zeta potential measurements. We also studied gold nanoparticle solutions to determine size effects on the crystallization of water. Electron microscopy was done of the dried colloids to determine the aggregation state of ferritin. By varying ferritin concentrations, pH values (surface charge), and the chemical nature of the particle surfaces, the relative roles of particle size, particle shape and surface chemistry on nucleation were elucidated. Comparing ferritin subunit proteins (light- and heavy-ferritin) excludes a specific ice-binding protein surface.

We report the development and characterization of a detection technique for scattering-type scanning near-field optical microscopy (s-SNOM) that enables near-field amplitude and phase imaging at two or more wavelengths simultaneously. To this end, we introduce multispectral pseudoheterodyne (PSH) interferometry, where infrared lasers are combined to form a beam with a discrete spectrum of laser lines and a time-multiplexing scheme is employed to allow for the use of a single infrared detector. We first describe and validate the implementation of multispectral PSH into a commercial s-SNOM instrument. We then demonstrate its application for the real-time correction of the negative phase contrast (NPC), which provides reliable imaging of weak IR absorption at the nanoscale. We anticipate that multispectral PSH could improve data throughput, reduce effects of sample and interferometer drift, and help to establish multicolor s-SNOM imaging as a regular imaging modality, which could be particularly interesting as new infrared light sources become available.

Incorporating biomolecules as integral parts of computational systems represents a frontier challenge in bio- and nanotechnology. Using DNA to store digital data is an attractive alternative to conventional information technologies due to its high information density and long lifetime. However, developing an adequate DNA storage medium remains a significant challenge in permitting the safe archiving and retrieval of oligonucleotides. This work introduces composite nucleic acid-polymer fibers as matrix materials for digital information-bearing oligonucleotides. We devised a complete workflow for the stable storage of DNA in PEO, PVA, and PCL fibers by employing electrohydrodynamic processes to produce electrospun nanofibers with embedded oligonucleotides. The on-demand retrieval of messages is afforded by non-hazardous chemical treatment and subsequent PCR amplification and DNA sequencing. Finally, we develop a platform for melt-electrowriting of polymer-DNA composites to produce microfiber meshes of programmable patterns and geometries.

When doped into a certain range of charge carrier concentrations, MoS2 departs from its pristine semiconducting character to become a strongly correlated material characterized by exotic phenomena such as charge density waves or superconductivity. However, the required doping levels are typically achieved using ionic-liquid gating or air-sensitive alkali-ion intercalation, which are not compatible with standard device fabrication processes. Here, the emergence of superconductivity and a charge density wave phase in air-stable organic cation intercalated MoS2 crystals are reported. By selecting two different molecular guests, it is shown that these correlated electronic phases depend dramatically on the intercalated cation, demonstrating the potential of organic ion intercalation to finely tune the properties of 2D materials. Moreover, it is found that a fully developed zero-resistance state is not reached in few-nm-thick flakes, indicating the presence of 3D superconductive paths that are severed by the mechanical exfoliation. This behavior is ascribed to an inhomogeneous charge carrier distribution, which is probed at the nanoscale using scanning near-field optical microscopy. The results establish organic-ion intercalated MoS2 as a platform to study the emergence and modulation of correlated electronic phases.

Some of the best nucleating agents in nature are ice-nucleating proteins, which boost ice growth better than any other material. They can induce immersion freezing of supercooled water only a few degrees below 0 °C. An open question is whether this ability also extends to the deposition mode, i.e., to water vapor. In this work, we used three proteins, apoferritin, InaZ (ice nucleation active protein Z), and myoglobin, of which the first two are classified as ice-nucleating proteins for the immersion freezing mode. We studied the ice nucleation ability of these proteins by differential scanning calorimetry (immersion freezing) and by environmental scanning electron microscopy (deposition freezing). Our data show that InaZ crystallizes water directly from the vapor phase, while apoferritin first condenses water in the supercooled state, and subsequently crystallizes it, just as myoglobin, which is unable to nucleate ice.

While the molecular mechanisms of virus infectivity are rather well known, the detailed consequences of environmental factors on virus biophysical properties are poorly understood. Seasonal influenza outbreaks are usually connected to the low winter temperature, but also to the low relative air humidity. Indeed, transmission rates increase in cold regions during winter. While low temperature must slow degradation processes, the role of low humidity is not clear. We studied the effect of relative humidity on a model of influenza A H1N1 virus envelope, a supported lipid bilayer containing the surface glycoprotein hemagglutinin (HA), which is present in the viral envelope in very high density. For complete cycles of hydration, dehydration and rehydration, we evaluate the membrane properties in terms of structure and dynamics, which we assess by combining confocal fluorescence microscopy, raster image correlation spectroscopy, line-scan fluorescence correlation spectroscopy and atomic force microscopy. Our findings indicate that the presence of HA prevents macroscopic membrane damage after dehydration. Without HA, fast membrane disruption is followed by irreversible loss of lipid and protein mobility. Although our model is principally limited by the membrane composition, the macroscopic effects of HA under dehydration stress reveal new insights on the stability of the virus at low relative humidity.

Atomically thin van der Waals magnetic crystals are characterized by tunable magnetic properties related to their low dimensionality. While electrostatic gating has been used to tailor their magnetic response, chemical approaches like intercalation remain largely unexplored. Here, we demonstrate the manipulation of the magnetism in the van der Waals antiferromagnet NiPS3 through the intercalation of different organic cations, inserted using an engineered two-step process. First, the electrochemical intercalation of tetrabutylammonium cations (TBA+) results in a ferrimagnetic hybrid compound displaying a transition temperature of 78 K, and characterized by a hysteretic behavior with finite remanence and coercivity. Then, TBA+ cations are replaced by cobaltocenium via an ion-exchange process, yielding a ferrimagnetic phase with higher transition temperature (98 K) and higher remanent magnetization. Importantly, we demonstrate that the intercalation and cation exchange processes can be carried out in bulk crystals and few-layer flakes, opening the way to the integration of intercalated magnetic materials in devices.

The epidemic spread of many viral infections is mediated by the environmental conditions and influenced by the ambient humidity. Single virus particles have been mainly visualized by atomic force microscopy (AFM) in liquid conditions, where the effect of the relative humidity on virus topography and surface cannot be systematically assessed. In this work, we employed multi-frequency AFM, simultaneously with standard topography imaging, to study the nanoscale wetting of individual Tobacco Mosaic virions (TMV) from ambient relative humidity to water condensation (RH > 100%). We recorded amplitude and phase vs. distance curves (APD curves) on top of single virions at various RH and converted them into force vs. distance curves. The high sensitivity of multifrequency AFM to visualize condensed water and sub-micrometer droplets, filling gaps between individual TMV particles at RH > 100%, is demonstrated. Dynamic force spectroscopy allows detecting a thin water layer of thickness ~1 nm, adsorbed on the outer surface of single TMV particles at RH < 60%.

Electrospinning is a well-known, straightforward, and versatile technique, widely used for the preparation of fibers by electrifying a polymer solution. However, a high molecular weight is not essential for obtaining uniform electrospun fibers; in fact, the primary criterion to succeed is the presence of sufficient intermolecular interactions, which function similar to chain entanglements. Some small molecules able to self-assemble have been electrospun from solution into fibers and, among them, peptides containing both natural and non-natural amino acids are of particular relevance. Nowadays, the use of peptides for this purpose is at an early stage, but it is gaining more and more interest, and we are now witnessing the transition from basic research towards applications. Considering the novelty in the relevant processing, the aim of this review is to analyze the state of the art from the early 2000s on. Moreover, advantages and drawbacks in using peptides as the main or sole component for generating electrospun nanofibers will be discussed. Characterization techniques that are specifically targeted to the produced peptide fibers are presented.

We employed environmental scanning electron microscopy (ESEM) in low-humidity atmosphere to study the ice growth, coalescence of crystallites, polycrystalline film morphology, and sublimation, in the temperature range of −10 to −20 ∘C. First, individual ice crystals grow in the shape of micron-sized hexagonal columns with stable basal faces. Their coalescence during further growth results in substantial surface defects and forms thick polycrystalline films, consisting of large grains separated by grain boundaries. The latter are composed of 1 to 3 µm wide pores, which are attributed to the coalescence of defective crystallite surfaces. Sublimation of isolated crystals and of films is defect-driven, and grain boundaries play a decisive role. A scallop-like concave structure forms, limited by sharp ridges, which are terminated by nanoscale asperities. The motivation for this work is also to evaluate ESEM's ability to provide a clean and reproducible environment for future study of nucleation and growth on atmospherically relevant nucleators such as materials of biological origin and inorganic materials. Hence, extensive information regarding potential ESEM beam damage and effect of impurities are discussed.

Biological material has gained increasing attention recently as a source of ice-nucleating particles that may account for cloud glaciation at moderate supercooling. While the ice-nucleation (IN) ability of some bacteria can be related to membrane-bound proteins with epitaxial fit to ice, little is known about the IN-active entities present in biological material in general. To elucidate the potential of proteins and viruses to contribute to the IN activity of biological material, we performed bulk freezing experiments with the newly developed drop freezing assay DRoplet Ice Nuclei Counter Zurich (DRINCZ), which allows the simultaneous cooling of 96 sample aliquots in a chilled ethanol bath. We performed a screening of common proteins, namely the iron storage protein ferritin and its iron-free counterpart apoferritin, the milk protein casein, the egg protein ovalbumin, two hydrophobins, and a yeast ice-binding protein, all of which revealed IN activity with active site densities > 0.1 mg−1 at −10 ∘C. The tobacco mosaic virus, a plant virus based on helically assembled proteins, also proved to be IN active with active site densities increasing from 100 mg−1 at −14 ∘C to 10 000 mg−1 at −20 ∘C. Among the screened proteins, the IN activity of horse spleen ferritin and apoferritin, which form cages of 24 co-assembled protein subunits, proved to be outstanding with active site densities > 10 mg−1 at −5 ∘C. Investigation of the pH dependence and heat resistance of the apoferritin sample confirmed the proteinaceous nature of its IN-active entities but excluded the correctly folded cage monomer as the IN-active species. A dilution series of apoferritin in water revealed two distinct freezing ranges, an upper one from −4 to −11 ∘C and a lower one from −11 to −21 ∘C. Dynamic light scattering measurements related the upper freezing range to ice-nucleating sites residing on aggregates and the lower freezing range to sites located on misfolded cage monomers or oligomers. The sites proved to persist during several freeze–thaw cycles performed with the same sample aliquots. Based on these results, IN activity seems to be a common feature of diverse proteins, irrespective of their function, but arising only rarely, most probably through defective folding or aggregation to structures that are IN active.

One of the most important effects of water on earth is that surfaces in air adsorb small amounts of water, usually in the form of a thin film. Real surfaces, especially the rather soft biomolecular surfaces, are covered by highly curved micro- and nanostructures, which induce more complex wetting geometries, such as films, droplets, and filaments. This effect, though ubiquitous, has not yet been investigated on the nanoscale. We have approached the situation by combining a soft proteinous surface, made up from very resilient tubular plant viruses, with ionic liquids. Their low vapor pressure allowed us to observe nanoscale wetting patterns at very high spatial resolution with AFM (atomic force microscopy), SEM (scanning electron microscopy) and STEM (scanning transmission electron microscopy). We found droplets, filaments and layers, with meniscus diameters down to below 10 nm. All geometries are comparable with results obtained on the microscale, and with standard macroscale wetting models. (C) 2018 Elsevier B.V. All rights reserved.

We investigate the electrospinning of small molecules, specifically designed peptide derivatives of the pyrazole-isothiazole scaffold. Such non-natural peptides enhance the spectrum of fundamental materials used for electrospinning. Unlike standard electrospun materials, our peptides are not polymeric, but able to aggregate in solution and especially during processing. They contain donor/acceptor groups that can form hydrogen bonds, and groups that are able to generate π-stacking interactions, which are known as important requirements for assembly processes. The pyrazole-isothiazole derivatives were synthesized by means of a 1,3-dipolar cycloaddition reaction, which is completely regioselective, affording only one isomer. We demonstrate that our compounds can be electrospun from fluoroalcohol solution into solid, quasi-endless micro- and nanofibers. The electrospinnability varies substantially, depending on the amino acids linked to the scaffold. Some compounds provide only short fibers, while Fmoc-glycyl-(N-benzyl)-pyrazole-isothiazole-tert-butyl carboxylate-1,1-dioxide forms continuous, homogenous, and bead-free fibers (droplet-like beads are a common problem in electrospinning). We analyzed the compounds and the fibers with various spectroscopic techniques (MS, IR and Raman). Electrospinning does not change chemical composition and configuration, suggesting the monomeric form of the compounds even in the fibers. Interestingly, we found that the stereochemistry of the scaffold can affect the ability of the peptide to be electrospun.

Metals and polymers are probably the most important construction materials, but also have many more functions, e.g., for electronics. The interaction of metal ions with tobacco mosaic virus (TMV) was originally used for the preparation of heavy metal isomorphic replacement for structural analysis. Metal ions can also be the precursors for metal clusters, particles, and layers. Various strategies have been developed, which allow the creation of metal layers on the external surface of TMV. Such layers can be made as metal tubes, enveloping a complete virion. An alternative strategy is adsorption of metal nanoparticles. If a dense coating of TMV is achieved, again a tube results. Nanoscale tubes have various physical properties that depend on size, crystallinity, uniformity, but especially on the nature of the metal. Polymer coatings are as yet rarely investigated, though they can be prepared quite easily.Here, a series of exemplary protocols is provided, which covers all of these different concepts.

Resumen del trabajo presentado a la 10th Conference on Broadband Dielectric Spectroscopy and its Applications (BDS) celebrada en Bruselas (Belgica) del 26 al 31 de agosto de 2018.

The electroless (chemical) deposition of cobalt on palladium-sensitized oxidized silicon wafers produces nanowires and chains made up by nanoparticles. We demonstrate that the application of moderate magnetic fields, provided by permanent magnets, during the growth produces highly oriented cobalt nanowires and nanoparticle chains. By adjusting the magnetic field direction in plane, parallel and crossed cobalt chain patterns are readily accessible. Perpendicular orientation of the field results in rod-like, standing-up chains of nanoparticles. We explain the observed structures with magnetostatic arguments.