The EnMAP (Environmental Mapping and Analysis Program) satellite, launched on 1 April 2022, is designed to provide high-resolution imaging spectroscopy data for environmental monitoring, resource management and land use mapping. The integrity and quality of the official data products are assessed by the mission's external product validation activities, which are independent of the calibration/validation activities from the ground segment.The external validation is intended to assess, monitor, and report the quality of the L1B (top-of-atmosphere radiance in sensor coordinates), L1C (top-of-atmosphere radiance in map coordinates), and L2A (surface reflectance in map coordinates) user products. This work presents an overview of the EnMAP product validation activities during the commissioning phase and the first two years of the operational phase. Radiometric, spectral, geometric, and general uniformity aspects are evaluated with scene-based analysis methods and through comparison with ground-based reference methods. We find that EnMAP's radiometric calibration is <5%, both smile and keystone are <20% of a pixel, and the Bottom-Of-Atmosphere (BOA) reflectance and Normalized Water-Leaving reflectance are well inside the mission requirements. These results confirm that the EnMAP products fulfill the mission requirements and pave the way for the scientific exploitation and use of the EnMAP products for land, water, and atmospheric applications.

Imaging spectroscopy has been a recognized and established remote sensing technology since the 1980s, mainly using airborne and field-based platforms to identify and quantify key bio- and geo-chemical surface and atmospheric compounds, based on characteristic spectral reflectance features in the visible-near infrared (VNIR) and short-wave infrared (SWIR). Spaceborne missions, a leap in technology, were sparse, starting with the CHRIS/PROBA and EO1/Hyperion missions in the early 2000s, and providing spectroscopy data with limited spectral coverage and/or low data quality in the SWIR. Since 2019, several countries and agencies have successfully launched a number of spaceborne imaging spectroscopy systems into orbit or deployed them on the International Space Station (ISS) such as DESIS, PRISMA, HISUI, GF-5, EnMAP and EMIT. Among these recent missions, the German Environmental Mapping and Analysis Program (EnMAP) stands for its long-term development, sophisticated design with on-board calibration, high data quality requirements, and extensive accompanying science program. EnMAP was launched in April 2022 and, following a successful commissioning phase, started its operational activities in November 2022. The EnMAP mission encompasses global coverage from 80 degrees N to 80 degrees S through on-demand data acquisitions. Data are free and open access with 30 m spatial resolution, a high spectral resolution with a spectral sampling distance of 6.5 nm and 10 nm in the VNIR and SWIR regions respectively, and a high signal-to-noise ratio. In this paper, we aim to present the mission's current status, coverage, science capabilities and performance two years after launch. We show the potential of EnMAP for space-based imaging spectroscopy to operate in various environments, including high and low light levels, dense forests, Antarctic glaciers, and arid agricultural areas. EnMAP enables various applications in fields such as agriculture and forestry, soil compositional, raw materials, and methane mapping, as well as water quality assessment, and snow and ice properties. The results show that EnMAP's performance exceeds the mission requirements, and highlights the significant potential for contribution to scientific exploitation in various geo- and biochemical sciences. EnMAP is also expected to serve as a key tool for the development and testing of data processing algorithms for upcoming global operational missions.

EnMAP (Environmental Mapping and Analysis Program) is a high-resolution imaging spectroscopy remote sensing mission that was successfully launched on April 1st, 2022. Equipped with a prism-based dual-spectrometer, EnMAP performs observations in the spectral range between 418.2nm and 2445.5nm with 224 bands and a high radiometric and spectral accuracy and stability. EnMAP products, with a ground instantaneous field-of-view of 30m×30m at a swath width of 30km, allow for the qualitative and quantitative analysis of surface variables from frequently and consistently acquired observations on a global scale. This article presents the EnMAP mission and details the activities and results of the Launch and Early Orbit and Commissioning Phases until November 1st, 2022. The mission capabilities and expected performances for the operational Routine Phase are provided for existing and future EnMAP users.

The Environmental Mapping and Analysis Program (EnMAP) is a spaceborne German hyperspectral satellite mission that aims at monitoring and characterizing the Earth's environment on a global scale. The mission is now ready to start with the sensor being by end of 2021 in Flight Acceptance Review, ready to be shipped to the launch pad in early 2022. This paper presents first an update of the mission status with recent activities and developments from the space and the ground segment. Then, an update of selected highlights of the science segment activities at launch phase are presented including preparation and if possible early results for the validation of EnMAP products, updates on EnMAP science algorithms (EnMAP-Box) developed at GFZ, online education initiative (HYPERedu), and further mission support activities such as background mission.

The Environmental Mapping and Analysis Program (EnMAP) is a spaceborne German hyperspectral satellite mission that aims at monitoring and characterizing the Earth’s environment on a global scale. This paper presents an update of the mission status with developments from the space and the ground segment.

The Environmental Mapping and Analysis Program (EnMAP) is a spaceborne German hyperspectral satellite mission that aims at monitoring and characterizing the Earth's environment on a global scale. EnMAP core themes are environmental changes, ecosystem responses to human activities, and management of natural resources. After several years delay, the instrument is finished and in the final stage of environmental characterization and assembly for a launch early 2022. This paper presents an update of the mission status and activities in the frame of the science preparation and mission support project led by the German Research Center for Geosciences (GFZ) Potsdam. Further, this paper presents a specific focus on the planning for the independent EnMAP data product validation.

The Environmental Mapping and Analysis Program (EnMAP) is a spaceborne German hyperspectral satellite mission that aims at monitoring and characterizing the Earth's environment on a global scale. After several years delay due to a major design issue to meet the mission requirements, the mission is now back on track and planned for launch in 2021. This paper presents an update of the mission status with recent activities and developments from the space and the ground segment. Furthermore, a draft plan for the independent validation of EnMAP radiance and reflectance products was developed and will be introduced, along with highlights of the science preparatory activities in 2019 including airborne campaigns, algorithm consolidations, and HYPERedu education initiative.

Passive measurement of sun-induced chlorophyll fluorescence (F) represents the most promising tool to quantify changes in photosynthetic functioning on a large scale. However, the complex relationship between this signal and other photosynthesis-related processes restricts its interpretation under stress conditions. To address this issue, we conducted a field campaign by combining daily airborne and ground-based measurements of F (normalized to photosynthetically active radiation), reflectance and surface temperature and related the observed changes to stress-induced variations in photosynthesis. A lawn carpet was sprayed with different doses of the herbicide Dicuran. Canopy-level measurements of gross primary productivity indicated dosage-dependent inhibition of photosynthesis by the herbicide. Dosage-dependent changes in normalized F were also detected. After spraying, we first observed a rapid increase in normalized F and in the Photochemical Reflectance Index, possibly due to the blockage of electron transport by Dicuran and the resultant impairment of xanthophyll-mediated non-photochemical quenching. This initial increase was followed by a gradual decrease in both signals, which coincided with a decline in pigment-related reflectance indices. In parallel, we also detected a canopy temperature increase after the treatment. These results demonstrate the potential of using F coupled with relevant reflectance indices to estimate stress-induced changes in canopy photosynthesis.

Terrestrial gross primary productivity (GPP) plays an essential role in the global carbon cycle, but the quantification of the spatial and temporal variations in photosynthesis is still largely uncertain. Our work aimed to investigate the potential of remote sensing to provide new insights into plant photosynthesis at a fine spatial resolution. This goal was achieved by exploiting high-resolution images acquired with the FLuorescence EXplorer (FLEX) airborne demonstrator HyPlant. The sensor was flown over a mixed forest, and the images collected were elaborated to obtain two independent indicators of plant photosynthesis. First, maps of sun-induced chlorophyll fluorescence (F), a novel indicator of plant photosynthetic activity, were successfully obtained at both the red and far-red peaks (r2 = 0.89 and p < 0.01, r2 = 0.77 and p < 0.01, respectively, compared to top-of-canopy ground-based measurements acquired synchronously with the overflight) over the forested study area. Second, maps of GPP and absorbed photosynthetically active radiation (APAR) were derived using a customised version of the coupled biophysical model Breathing Earth System Simulator (BESS). The model was driven with airborne-derived maps of key forest traits (i.e., leaf chlorophyll content (LCC) and leaf area index (LAI)) and meteorological data providing a high-resolution snapshot of the variables of interest across the study site. The LCC and LAI were accurately estimated (RMSE = 5.66 μg cm-2 and RMSE = 0.51 m2m-2, respectively) through an optimised Look-Up-Table-based inversion of the PROSPECT-4-INFORM radiative transfer model, ensuring the accurate representation of the spatial variation of these determinants of the ecosystem's functionality. The spatial relationships between the measured F and modelled BESS outputs were then analysed to interpret the variability of ecosystem functioning at a regional scale. The results showed that far-red F is significantly correlated with the GPP (r2 = 0.46, p < 0.001) and APAR (r2 = 0.43, p < 0.001) in the spatial domain and that this relationship is nonlinear. Conversely, no statistically significant relationships were found between the red F and the GPP or APAR (p > 0.05). The spatial relationships found at high resolution provide valuable insight into the critical role of spatial heterogeneity in controlling the relationship between the far-red F and the GPP, indicating the need to consider this heterogeneity at a coarser resolution.

Hyperspectral remote sensing (RS) provides unique possibilities to monitor peatland vegetation traits and their temporal dynamics at a fine spatial scale. Peatlands provide a vital contribution to ecosystem services by their massive carbon storage and wide heterogeneity. However, monitoring, understanding, and disentangling the diverse vegetation traits from a heterogeneous landscape using complex RS signal is challenging, due to its wide biodiversity and distinctive plant species composition. In this work, we aim to demonstrate, for the first time, the large heterogeneity of peatland vegetation traits using well-established vegetation indices (VIs) and Sun-Induced Fluorescence (SIF) for describing the spatial heterogeneity of the signals which may correspond to spatial diversity of biochemical and structural traits. SIF originates from the initial reactions in photosystems and is emitted at wavelengths between 650–780 nm, with the first peak at around 687 nm and the second peak around 760 nm. We used the first HyPlant airborne data set recorded over a heterogeneous peatland area and its surrounding ecosystems (i.e., forest, grassland) in Poland. We deployed a comparative analysis of SIF and VIs obtained from differently managed and natural vegetation ecosystems, as well as from diverse small-scale peatland plant communities. Furthermore, spatial relationships between SIF and VIs from large-scale vegetation ecosystems to small-scale peatland plant communities were examined. Apart from signal variations, we observed a positive correlation between SIF and greenness-sensitive VIs, whereas a negative correlation between SIF and a VI sensitive to photosynthesis was observed for large-scale vegetation ecosystems. In general, higher values of SIF were associated with higher biomass of vascular plants (associated with higher Leaf Area Index (LAI)). SIF signals, especially SIF760, were strongly associated with the functional diversity of the peatland vegetation. At the peatland area, higher values of SIF760 were associated with plant communities of high perennials, whereas, lower values of SIF760 indicated peatland patches dominated by Sphagnum. In general, SIF760 reflected the productivity gradient on the fen peatland, from Sphagnum-dominated patches with the lowest SIF and fAPAR values indicating lowest productivity to the Carex-dominated patches with the highest SIF and fAPAR values indicating highest productivity.

The growing availability of global measurements of sun-induced chlorophyll fluorescence (SIF) can help in improving crop monitoring, especially the monitoring of photosynthetic activity. However, variations in top-of-canopy (TOC) SIF cannot be directly interpreted as physiological changes because of the confounding effects of vegetation biochemistry (i.e. pigments, dry matter and water) and structure. In this study, we propose an approach of using radiative transfer models (RTMs) and TOC reflectance to estimate the biochemical and structural effects on TOC SIF, as a necessary step in retrieving physiological information from TOC SIF. The approach was assessed by using airborne (HyPlant) reflectance and SIF data acquired over an agricultural experimental farm in Germany on two days, before and during a heat event in summer 2015 with maximum temperatures of 27°C and 34°C, respectively. The results show that over 76% variation among different crops in SIF observations was explained by variation in vegetation biochemistry and structure. In addition, the changes of vegetation biochemistry and structure explained as much as 73% variation between the two days in far-red SIF, and 40% variation in red SIF. The remaining unexplained variation was mostly attributed to the variability in physiological status. We conclude that reflectance provides valuable information to account for biochemical and structural effects on SIF and to advance analysis of SIF observations. The combination of RTMs, reflectance and SIF opens new pathways to detect vegetation biochemical, structural and physiological changes.

The HyPlant imaging spectrometer is a high-performance airborne instrument consisting of two sensor modules. The DUAL module records hyperspectral data in the spectral range from 400–2500 nm, which is useful to derive biochemical and structural plant properties. In parallel, the FLUO module acquires data in the red and near infrared range (670–780 nm), with a distinctly higher spectral sampling interval and finer spectral resolution. The technical specifications of HyPlant FLUO allow for the retrieval of sun-induced chlorophyll fluorescence (SIF), a small signal emitted by plants, which is directly linked to their photosynthetic efficiency. The combined use of both HyPlant modules opens up new opportunities in plant science. The processing of HyPlant image data, however, is a rather complex procedure, and, especially for the FLUO module, a precise characterization and calibration of the sensor is of utmost importance. The presented study gives an overview of this unique high-performance imaging spectrometer, introduces an automatized processing chain, and gives an overview of the different processing steps that must be executed to generate the final products, namely top of canopy (TOC) radiance, TOC reflectance, reflectance indices and SIF maps.

Due to its close link to the photosynthetic process, sun-induced chlorophyll fluorescence (F) opens new possibilities to study dynamics of photosynthetic light reactions and to quantify CO2 assimilation rates. Although recent studies show that F is linearly related to gross primary production (GPP) on coarse spatial and temporal scales, it is argued that this relationship may be mainly driven by seasonal changes in absorbed photochemical active radiation (APAR) and less by the plant light use efficiency (LUE).In this work a high-resolution spectrometer was used to continuously measure red and far-red fluorescence and different reflectance indices within a sugar beet field during the growing season in 2015. Diurnal and seasonal developments were compared to eddy covariance derived GPP.Additionally, part of the time series coincided with a heatwave. The induced drought stress allowed us to observe F and its relationship to GPP under changing environmental conditions during the seasonal cycle.Across the season a strong linear relationship between GPP and F760 was found. This relationship however, was mainly driven by changes in APAR and was strongly reduced under drought conditions. We could show that far-red fluorescence yield can explain 59% of the diurnal and 79% of the seasonal variance in the light use efficiency. However, an even stronger relationship between FY760 and the structural vegetation index MTVI2 was found, implying that FY760 is affected by seasonal structural changes of the canopy. Nevertheless, the seasonally de-trended FY760 and PRI show that they share strong interdependencies with seasonal and diurnal LUE, in particular under drought stress conditions.

The contribution presents the development and testing of a fluorescence retrieval scheme based on the ESA's FLuorescence EXplorer mission concept. The algorithm employs on a coupled surface-atmosphere forward model at oxygen absorption bands: i) the atmospheric effect is computed by MODTRAN5; ii) the surface reflectance and fluorescence are modeled by means of the Spectral Fitting approach. The algorithm, previously tested on numerical simulations, was further implemented and optimized to process real observations collected by the FLEX airborne demonstrator HyPlant. The retrieval scheme has been tested on a number of flight lines collected in several locations, different ecosystems types, atmospheric conditions and instrument observation conditions. For the first time, this work shows the capability of retrieving canopy fluorescence from real airborne observations by means of a physically-based algorithm as envisaged for FLEX. The results achieved on the large core data sets of imageries show the consistency of the physical retrieval algorithm for a wide range of scenarios and fluorescence values are in line with ground observations.

Leaf fluorescence can be used to track plant development and stress, and is considered the most direct measurement of photosynthetic activity available from remote sensing techniques. Red and far-red sun-induced chlorophyll fluorescence (SIF) maps were generated from high spatial resolution images collected with the HyPlant airborne spectrometer over even-aged loblolly pine plantations in North Carolina (United States). Canopy fluorescence yield (i.e., the fluorescence flux normalized by the light absorbed) in the red and far-red peaks was computed. This quantifies the fluorescence emission efficiencies that are more directly linked to canopy function compared to SIF radiances. Fluorescence fluxes and yields were investigated in relation to tree age to infer new insights on the potential of those measurements in better describing ecosystem processes. The results showed that red fluorescence yield varies with stand age. Young stands exhibited a nearly twofold higher red fluorescence yield than mature forest plantations, while the far-red fluorescence yield remained constant. We interpreted this finding in a context of photosynthetic stomatal limitation in aging loblolly pine stands. Current and future satellite missions provide global datasets of SIF at coarse spatial resolution, resulting in intrapixel mixture effects, which could be a confounding factor for fluorescence signal interpretation. To mitigate this effect, we propose a surrogate of the fluorescence yield, namely the Canopy Cover Fluorescence Index (CCFI) that accounts for the spatial variability in canopy structure by exploiting the vegetation fractional cover. It was found that spatial aggregation tended to mask the effective relationships, while the CCFI was still able to maintain this link. This study is a first attempt in interpreting the fluorescence variability in aging forest stands and it may open new perspectives in understanding long-term forest dynamics in response to future climatic conditions from remote sensing of SIF.