Solid-state nuclear magnetic resonance (ssNMR) is a high-resolution and versatile spectroscopic tool for characterizing pharmaceutical solids. However, the inherent low sensitivity of NMR remains a significant challenge in the analysis of natural abundance drug substances and products. Here, we report, for the first time, the application of a CPMAS CryoProbe™ to improve the sensitivity of 13C and 15N detection by approximately 5 to 6 times for solid-state analysis of a commercial pharmaceutical drug posaconazole (POSA). The sensitivity enhancement enables two-dimensional (2D) 13C-13C and 1H-15N correlation experiments, which are otherwise time-prohibitive using regular MAS probes, for resonance assignment and structural elucidation. These polarization transfer and correlation experiments reveal drug-drug and drug-polymer interactions in amorphous POSA and its amorphous solid dispersion formulation. Our results demonstrated that the CPMAS CryoProbe™ can be widely applied for routine pharmaceutical analysis and advanced structural investigations with significantly enhanced efficiency and throughput.

Solution phase titrations are made easy by multi-nuclear FlowNMR spectroscopy with automated, continuous titre addition to give accurate insights into Brønsted acid/base, hydrogen bonding, Lewis acid/base and metal/ligand binding equilibria under native conditions.

Noyori-Ikariya type [(arene)RuCl(TsDPEN)] (TsDPEN, sulfonated diphenyl ethylenediamine) complexes are widely used C=O and C=N reduction catalysts that produce chiral alcohols and amines via a key ruthenium-hydride intermediate that determines the stereochemistry of the product. Whereas many details about the interactions of the pro-chiral substrate with the hydride complex and the nature of the hydrogen transfer from the latter to the former have been investigated over the past 25 years, the role of the stereochemical configuration at the stereogenic ruthenium center in the catalysis has not been elucidated so far. Using operando FlowNMR spectroscopy and nuclear Overhauser effect spectroscopy, we show the existence of two diastereomeric hydride complexes under reaction conditions, assign their absolute configurations in solution, and monitor their interconversion during transfer hydrogenation catalysis. Configurational analysis and multifunctional density functional theory (DFT) calculations show the λ-(R,R)S Ru configured [(mesitylene)RuH(TsDPEN)] complex to be both thermodynamically and kinetically favored over its λ-(R,R)R Ru isomer with the opposite configuration at the metal. Computational analysis of both diastereomeric catalytic manifolds show the major λ-(R,R)S Ru configured [(mesitylene)RuH(TsDPEN)] complex to dominate asymmetric ketone reduction catalysis with the minor λ-(R,R)R Ru [(mesitylene)RuH(TsDPEN)] stereoisomer being both less active and less enantioselective. These findings also hold true for a tethered catalyst derivative with a propyl linker between the arene and TsDPEN ligands and thus show enantioselective transfer hydrogenation catalysis with Noyori-Ikariya complexes to proceed via a lock-and-key mechanism.

Wastewater contains complex organic signatures whose components can be harmful to both environmental and human health. Nuclear Magnetic Resonance (NMR) spectroscopy is an excellent tool for molecular monitoring, with the ability to follow total organics, subcategories (aromatics, aliphatic etc.) and, resolution permitting, even individual compounds. However, due to the relatively low sensitivity of NMR, studies of wastewater to date have involved pre-concentration (often many liters) before analysis. This proof of concept study asks, “Is NMR sensitive enough for on-line wastewater monitoring without pre-concentration?” Here, a continuous flow 500 MHz NMR system, coupled with a sunlight simulator and ozone generator, was used on unaltered and unconcentrated wastewater to assess the potential of on-line NMR for understanding wastewater treatment processes. Wastewater from 3 different treatment stages were analyzed. In general, combined ozone and sunlight was more effective at removing organics, while differences in behavior of the same molecules within different wastewater fractions suggest that the chemistry is more complex than just the action of “reactants” (light, ozone) on the target chemicals, and to some extent, involves other components in the wastewater. As such, the nature of the effluent itself could also have important impacts on the rate and completion of its degradation. In summary, on-line NMR of wastewater treatment could be carried out without pre-concentration of the wastewater, in line with important future applications for understanding wastewater treatment processes at the molecular level. Over the last decade, there has been considerable development in low field, low footprint, low cost, NMR spectrometers. Portable versions of those systems could potentially, in the future, be applied for on-site, on-line monitoring of waste streams at water treatment plants, as described here.

Catalytic hydrogen transfer from basic isopropyl alcohol to aryl ketones mediated by [(arene)-(TsDPEN)RuCl] complexes has been investigated by operando (HNMR)-H-1 spectroscopy using a recirculating flow setup. Selective excitation pulse sequences allowed fast and quantitative monitoring of the key [(mesitylene)(TsDPEN)-RuH] intermediate during catalysis, which is shown to interact with both substrates by polarization transfer experiments. Comparison of reaction profiles with catalyst speciation traces in conjunction with reaction progress kinetic analysis using variable time normalization and kinetic modeling showed the existence of two independent catalyst deactivation/inhibition pathways: whereas excess base exerted a competitive inhibition effect on the unsaturated catalyst intermediate, the active hydride suffered from an inherent first-order decay that is not evident in early stages of the reaction where turnover is fast. Isotopic labeling revealed arene loss to be the entry point into deactivation pathways to Ru nanoparticles via hydride-bridged intermediates.

Transfer hydrogenation of acetophenone from formic acid/triethylamine mixtures catalysed by the Ikariya-Noyori complex [(mesitylene)RuCl(R,R)-(TsDPEN)] has been investigated using simultaneous high-resolution FlowNMR and FlowUV-Vis spectroscopies coupled with on-line sampling head-space mass spectrometry and chiral high-performance liquid chromatography using an integrated, fully automated recirculating flow setup. In line with previous observations, the combined results show a gradual switch from formic acid dehydrogenation to hydrogen transfer mediated by the same Ru-hydride complex, and point to a Ru-formate species as the major catalyst intermediate. Hydrogen bonding in the formic acid/triethylamine mixture emerges as a sensitive 1H NMR probe for the transfer hydrogenation activity of the system and can be used to locate optimum reaction conditions.

Progress reaction profiles are affected by both catalyst activation and deactivation processes occurring alongside the main reaction. These processes complicate the kinetic analysis of reactions, often directing researchers toward incorrect conclusions. We report the application of two kinetic treatments, based on variable time normalization analysis, to reactions involving catalyst activation and deactivation processes. The first kinetic treatment allows the removal of induction periods or the effect of rate perturbations associated with catalyst deactivation from kinetic profiles when the quantity of active catalyst can be measured. The second treatment allows the estimation of the activation or deactivation profile of the catalyst when the order of the reactants for the main reaction is known. Both treatments facilitate kinetic analysis of reactions suffering catalyst activation or deactivation processes.

Inline, real time NMR and temperature measurements have been used to optimise the continuous flow synthesis of difluoromethyltrimethylsilane (TMSCF2H) by the reduction of the Ruppert-Prakash reagent (TMSCF3). These measurements were used to maximise the space-time-yield, while ensuring this exothermic process remains safe. In this way, a three-fold increase in space-time-yield was achieved compared to the reported batch procedure, isolating 25 g of pure TMSCF2H after 105 min. (C) 2018 Published by Elsevier Ltd.

The fate of most lignin linkages, other than the β-O-4, under selective oxidation conditions is largely unknown. In this work we use advanced β-5 lignin model compounds to identify the fate of phenylcoumaran units in a softwood lignin during oxidation with DDQ. By using model compounds combined with detailed characterisation of the oxidised lignin polymer using HSQC and HMBC NMR we show that phenylcoumarones are a major product, and therefore constitute a novel non-native β-5 linkage in oxidised lignins. Additionally, the reactivity of these units in lignin led us to further investigate their connectivity in lignin, showing that they are found as both phenolic and etherified units. The findings and approach developed here will help improve the efficiency of selective oxidative lignin depolymerisation processes, particularly those aimed at the upgrading of softwood lignin in which phenylcoumarans are a major linkage.

FlowNMR has the aim of continuously monitoring processes that occur in conditions that are not compatible with being carried out within a closed tube. However, it is sample intensive and not suitable for samples, such as proteins or living cells, that are often available in limited volumes and possibly low concentrations. We here propose a dialysis-based modification of a commercial flowNMR setup that allows for recycling the medium while confining the sample (proteins and cells) within the active volume of the tube. This approach is demonstrated in the specific cases of in-cell NMR and protein-based ligand studies.

These two solutions have been designed for multiple end uses including: measuring reaction kinetics; understanding reaction mechanisms; maximising chemical yields, and determining the effect of process variables (e.g. stoichiometry, temperature etc.) on the reaction under study. As shown by several papers and publications, NMR is capable of achieving such insights and the systems described here are the first purpose-designed flow tubes that can help achieve these important goals.

We demonstrate how FlowNMR spectroscopy can readily be applied to investigate photochemical reactions that require sustained input of light and air to yield mechanistic insight under realistic conditions. The Eosin Y mediated photo-oxidation of N-allylbenzylamine is shown to produce imines as primary reaction products from which undesired aldehydes form after longer reaction times. Facile variation of reaction conditions during the reaction in flow allows for probe experiments that give information about the mode of action of the photocatalyst.

FlowNMR spectroscopy is an excellent technique for non-invasive real-time reaction monitoring under relevant conditions that avoids many of the limitations that bedevil other reaction monitoring techniques. With the recent commercial availability of FlowNMR hard-and software solutions for high resolution spectrometers it is enjoying increased popularity in both academia and industry. We present an account on practical aspects of high field multi-nuclear FlowNMR for reaction monitoring including apparatus design, flow effects, acquisition parameters and data treatment, which are important to consider if accurate kinetic data are to be obtained from FlowNMR experiments. Flow effects on NMR peak areas are particularly important as they can lead to large quantification errors if overlooked, but can easily be corrected for and even used to increase temporal resolution with suitably adjusted instrument settings.

We propose several significant improvements to the PANSY (Parallel NMR SpectroscopY) experiments-PANSY COSY and PANSY-TOCSY. The improved versions of these experiments provide sufficient spectral information for structure elucidation of small organic molecules from just two 2D experiments. The PANSY-TOCSY-Q experiment has been modified to allow for simultaneous acquisition of three different types of NMR spectra-1D C-13 of non-protonated carbon sites, 2D TOCSY and multiplicity edited 2D HETCOR. In addition the J-filtered 2D PANSY-gCOSY experiment records a 2D HH gCOSY spectrum in parallel with a (1)J-filtered HC long-range HETCOR spectrum as well as offers a simplified data processing. In addition to parallel acquisition, further time savings are feasible because of significantly smaller F1 spectral windows as compared to the indirect detection experiments. Use of cryoprobes and multiple receivers can significantly alleviate the sensitivity issues that are usually associated with the so called direct detection experiments. In cases where experiments are sampling limited rather than sensitivity limited further reduction of experiment time is achieved by using Hadamard encoding. In favorable cases the total recording time for the two PANSY experiments can be reduced to just 40 s. The proposed PANSY experiments provide sufficient information to allow the CMCse software package (Bruker) to solve structures of small organic molecules. Copyright (C) 2015 John Wiley & Sons, Ltd.

A thorough investigation into the mechanism of the reaction of 3‐methylpentanoic acid and Meldrum's acid using online NMR spectroscopy is reported. This study is an expansion of a previous analysis of this chemical transformation in the synthesis of an active pharmaceutical ingredient imagabalin. The 3‐methylpentanoic acid analogue reveals similar behavior under the reaction conditions. Online NMR spectroscopy and offline characterization experiments reveal new information about the mechanism, providing conclusive spectroscopic evidence for the previously hypothesized dimer anhydride intermediate species 3‐methylpentanoic anhydride as a productive intermediate. The presence of an acyl chloride intermediate species, 3‐methylpentanoyl chloride, is also revealed for the first time in this synthesis. Copyright © 2015 John Wiley & Sons, Ltd.

In this paper we describe the development of a 5 mm NMR flow tube that can be used in a standard 5 mm NMR probe, enabling the user to conduct experiments on flowing samples or, more specifically, on flowing reaction mixtures. This enables reaction monitoring or kinetic experiments to be conducted by flowing reaction mixtures from a reaction vessel to detection in the coil area of the NMR, without the need for a specialized flow NMR probe. One of the key benefits of this flow tube is that it provides flexibility to be used across a range of available spectrometers of varying magnetic field strengths with a standard 5 mm probe setup. The applicability of this flow tube to reaction monitoring is demonstrated using the reaction of p-phenylenediamine and isobutyraldehyde to form the diimine product.

We show the use of NMR spectroscopy to develop detailed understanding of a reaction mechanism during development of a manufacturing process for an active pharmaceutical ingredient (API). This includes structural elucidation of reaction starting materials, intermediates and products. The method is able to generate an immediate mass balance through quantitative profiling of all materials involved in the reaction. A straightforward reaction monitoring methodology was employed using existing laboratory based equipment.

The combination of kinetic understanding and reaction modeling has been successfully applied to the development of processes from laboratory to manufacturing plant. Although extensively used in bulk chemistry, polymers, and the oil industry [Bayer Technology Services, http://www.bayertechnology.cn/uploads/media/0707_e_300dpi.pdf, July 2011; Lawrence Livermore National Laboratory, http://www1.eere.energy.gov/vehiclesandfuels/pdfs/merit_review_2011/fuel_technologies/ft010_pitz_2 011_o.pdf,July 2011; Shin, S. B.; Han, S. P.; Lee, W. J.; Chae, J. H.; Lee, D. I.; Lee, W. H.; Urban, Z.Hydrocarbon Process. 2007, April) 83; Baumer, C.; Urban, Z.Hydrocarbon Process. 2007, June) 71], it has not been exploited to its full potential in the pharmaceutical industry. We present a fast and efficient methodology for kinetic modeling of chemical reactions using 1H NMR reaction monitoring that can be used for the process understanding and development of active pharmaceutical ingredients. The parameters that are important for the development of a good, reliable model for the prediction and optimization of reaction conditions are discussed. The hydrolysis of acetic anhydride was chosen to illustrate the methodology because it is mechanistically and kinetically well established.

Gas chromatography (GC) with a preparative fraction collector (PFC) has been used to facilitate the identification of a number of volatile impurities at major and minor percentage levels in a pharmaceutical matrix by nuclear magnetic resonance spectroscopy (NMR) and mass spectrometry (MS). The trapping process was optimized using liquid sorbents, and the impurities were trapped directly into a deuterated solvent. Challenges related to the pharmaceutical matrix were overcome by derivatization with boron trifluoride in methanol and extraction with heptane, producing the methyl esters of the carboxylic acid impurities and main component. GC coupled to atmospheric pressure chemical ionization mass spectrometry (APCI-MS) with a time-of-flight (TOF) detector was used to acquire accurate mass and isotopic data for the impurities, leading to the determination of their molecular formulas (MF). One dimensional (1D) and two-dimensional (2D) NMR experiments were also acquired to unambiguously determine the impurities' structure. The acquisition time of the latter experiments was minimized by using a high-resolution instrument equipped with a small (1.7 mm) cryogenic probe. The quality of the data was such that the structure of the impurities could be determined semiautomatically by using a computer-assisted structure elucidation (CASE) approach, even though the total amount of one of the isolated impurities was less than 60 nmol.