This study investigated three advanced oxidation processes for Ciprofloxacin (CIP) water treatment: photolysis (PL), TiO₂ photocatalysis (PC), and high voltage electrical discharges (HVED). The research comprehensively evaluated degradation performances, electrical energy consumption, and ecotoxicological impacts. Comparative analysis revealed PC as the most effective treatment method. Half-life measurements of ciprofloxacin showed significant differences: PL (14.1 min), HVED (13.9 min) and PC (2.6 min). Notably, PC exhibited superior mineralization capabilities, achieving 25 times faster non-purgeable organic carbon (NPOC) reduction compared to photolysis and 2 times faster than HVED. Electrical energy consumption assessments further substantiated PC's efficiency. To attain 90% degradation of CIP, the process consumed less energy, with photolysis and HVED requiring 4.5 and 2.2 times more energy, respectively. Ecotoxicological evaluation involved three distinct organism types: Vibrio fischeri (bioluminescent bacteria), Daphnia magna (planktonic crustacean), and Trifolium repens (plant). Short-duration treatments (15–30 minutes) revealed increased toxicity. Luminescence inhibition in Vibrio fischeri and immobilisation of Daphnia magna suggested that intermediate degradation products were more toxic than the parent CIP molecule. Interestingly, a less pronounced toxic effect was observed on Trifolium repens compared to aquatic organisms, highlighting the complex ecological implications of water treatment processes. These findings provide crucial insights into advanced oxidation technologies for water remediation.

Ultrasound as a green and efficient process gains special attention in wastewater treatment. The ultrasound-assisted degradation of azoxystrobin, methoxyfenozide, and propyzamide as widely used pesticides for vine treatment was investigated. A wide range of ultrasonic power (40 to 140 W) and a single frequency (20 kHz) were applied. Degradation experiments were carried out according to the parameters set by a central composite design (CCD) under response surface methodology (RSM) via JMP software. The treatment efficiency was quantified using degradation rates and hydrogen peroxide (H 2 O 2 ) measurements. Results indicated that the pesticide’s degradation was negligible at 40 W but by increasing the power setting from 80 to 140 W, the degradation rate constants of azoxystrobin, methoxyfenozide, and propyzamide increased from 3.6 × 10 −2 min −1 to 0.2 min −1 , from 6.1 × 10 −2 min −1 to 0.3 min −1 , and from 3.1 × 10 −2 min −1 to 0.1 min −1 , respectively. The hydrogen peroxide (H 2 O 2 ) measurements confirmed this trend. Besides, electric energy per order of pollutant removal (EE/O) was also evaluated for the same treatment duration and results revealed that treatment conditions of 20 kHz and 140 W were the less energy-guzzling. Finally, profiles obtained with RSM illustrated linear degradation kinetics for azoxystrobin and propyzamide. Indeed, treatment efficiency increased when increasing both studied parameters. However, both linear and quadratic degradation kinetics occurred for methoxyfenozide degradation indicating a parameter threshold beyond which the trend is reversed. Overall, this study confirms the effectiveness of ultrasound for the degradation of pesticides in aqueous medium.

This study investigated the environmental fate of myrigalone A, a light absorbing natural herbicide found on leaves and fruits of Myrica gale. Myrigalone A was irradiated in water and as a dry solid deposit to simulate reactions on leaves, alone and in the presence of the terpenes generated by Myrica gale. The phototransformation was fast ( t1/2 = 35 min in water). Analyses by liquid chromatography coupled to high resolution orbitrap electrospray mass spectrometry (MS) and gas chromatography-MS revealed the formation of 11 photoproducts in water and solid and 9 in gaseous phase. Some were detected in the leaf glands and oil covering the fruits of Myrica gale, which suggested that photodegradation occurred in the field. Moreover, myrigalone A photoinduced the oxidation of terpenes that in turn protected it against photolysis. This highlights the need for additional research on the effect of terpenes on the photodegradation of pesticides on vegetation.

UV and IR photochemistries of malonaldehyde, the simplest molecule exhibiting an intramolecular proton exchange, have been studied in four cryogenic matrices at 4.3 K, N2, Ne, Ar, and Xe. Samples have been irradiated using a UV and IR OPO type tunable laser, and with a broad band UV mercury lamp. UV and IR spectra have been recorded and compared with theoretical calculations carried out at the SAC-CI/6-31++G(d,p) (UV transitions) and B3LYP/6-311++G(2d,2p) (IR spectra) levels of theory. After deposition, the intramolecularly H-bonded form is found exclusively, while several open forms are formed upon UV irradiation. These open forms show ability to interconvert upon UV irradiation too. Some of them are also able to isomerize upon selective IR irradiations. The whole set of results allowed us to identify seven isomers among the eight postulated. The photodynamics of the electronic relaxation of malonaldehyde have also been investigated. By following the decay or rise of suited specific vibrational bands in the IR spectra, and by comparing the results with an earlier study of the homologous acetylacetone, we deduced that the electronic relaxation of malonaldehyde proceeds through singlet states, most probably through a 3-fold conical intersection, as postulated from theoretical calculations. In contrast with acetylacetone, malonaldehyde does not show fragmentation after UV excitation.

Sulfonamides (SNs) are synthetic antimicrobial agents. These substances are continually introduced into the environment, and they may spread and maintain bacterial resistance in the different compartments. The chlorination of 2 SNs, namely, sulfamethazine (SMT) and sulfamethoxypyridazine (SMP), was investigated to study their reactivity with chlorine at typical concentrations for water treatment conditions. Experiments conducted in purified water show an acceleration of SMT and SMP degradation of a factor 1.5 by comparison to drinking water matrix. This difference is due to pH variation and competitive reactions between SNs and mineral and organic compounds, with chlorine in drinking water. In the presence of an excess of chlorine (6.7 μmol·L-1 ) in ultrapure water at pH 7.2, second-order degradation rate constants were equal to 4.5 × 102 M-1 ·s-1 and 5.2 × 102 M-1 ·s-1 for SMT and SMP, respectively. The structures of transformation products were investigated by liquid chromatography tandem mass spectrometry analyses with equimolar concentrations between chlorine and SNs. SO2 elimination, cyclization, and electrophilic substitutions were the main pathways of by-products formation. Moreover, the toxicity of the proposed structures was predicted by using toxicity estimation software tool program. The results indicated that most by-products may present developmental toxicity.

Kinetics of photodegradation of novel oral anticoagulants dabigatran, rivaroxaban, and apixaban were studied under simulated solar light irradiation in purified, mineral, and river waters. Dabigatran and rivaroxaban underwent direct photolysis with polychromatic quantum yields of 2.2 x 10(-4) and 4.4 x 10(-2), respectively. The direct photodegradation of apixaban was not observed after 19 h of irradiation. Kinetics of degradation of rivaroxaban was not impacted by the nature of the aqueous matrix while photosensitization from nitrate ions was observed for dabigatran and apixaban dissolved in a mineral water. The photosensitized reactions were limited in the tested river water (Isle River, Perigueux, France) certainly due to the hydroxyl radical scavenging effect of the dissolved organic matter. The study of photoproduct structures allowed to identify two compounds for dabigatran. One of them is the 4-aminobenzamidine while the second one is a cyclization product. In the case of rivaroxaban, as studied by very high field NMR, only one photoproduct was observed i.e. a photoisomer. Finally, seven photoproducts were clearly identified from the degradation of apixaban under simulated solar light. (C) 2017 Elsevier Ltd. All rights reserved.

In this study, we aimed to investigate the kinetics and the mechanism of reaction of the fluoroquinolone antibacterial danofloxacin (DANO) by free available chlorine (FAC) during water chlorination process. Kinetic study was thus performed at pH 7.2, 20 °C in the presence of an excess of total chlorine. Under these experimental conditions, a second-order reaction rate constant (first-order relative to DANO concentration and first-order relative to FAC concentration) was evaluated to k~1446 M−1 s−1. Five degradation products were identified at different reaction times. Their structures were investigated by using fragmentations obtained at different CID collision energies in MS/MS experiments. Moreover, the toxicity of the proposed structures was predicted by using T.E.S.T. program. The results indicated that all by-products may have a developmental toxicity. The oral rat LD50 concentration was predicted to be lower than that of DANO. Furthermore, two degradation compounds presented a concentration level for fathead minnow LC50 (96 h) lower than that of DANO and presented toxicity for the marine animals.

The photochemical transformation of two antibacterial sulfonamides, namely sulfamethazine (SMT) and sulfamethoxypyridazine (SMP), and two tricyclic antidepressants, namely amitriptyline (AMT) and clomipramine (CMP) were investigated. Experiments conducted in river water under artificial sunlight irradiation show an acceleration of the degradation for SMT, SMP, and CMP of a factor 1.6-7.7 by comparison to purified water. This acceleration is, at least partially, due to photosensitized reactions which can occur in river water. The photodegradation of CMP was particularly fast. In addition, no degradation was observed for AMT in purified water while photosensitized reaction occurs. Under ultraviolet (254 nm) irradiation in purified water, the four drugs were degraded. Calculated quantum yields of photodegradation were of 4.3 x 10(-3), 5.1 x 10(-3), 7.6 x 10(-3), and 65.0 x 10(-3) respectively for SMT, SMP, AMT, and CMP. UV coupled with hydrogen peroxide (UV/H2O2) was used as an advanced oxidation process for water depollution. The calculated second order rate constants of reaction with hydroxyl radicals were of 5.0 x 10(9), 5.0 x 10(9), 8.0 x 10(9) and 9.5 x 10(9) L mol(-1) s(-1) for SMT, SMP, AMT and CMP, respectively. Finally, the structures of photoproducts were proposed according to LC-MS/MS analyses. The elimination of SO2 was the main photochemical process for SMT and SMP. In the case of AMT and CMP, hydration and hydroxylation, respectively, were observed. (C) 2016 Elsevier B.V. All rights reserved.

In this study, experimental far infrared measurements of L-serine, L-threonine, L-cysteine, and L-methionine are presented showing the spectra for the 1.0-13.0 pH range. In parallel, solid state DFT calculations were performed on the amino acid zwitterions in the crystalline form. We focused on the lowest frequency far infrared normal modes, which required the most precision and convergence of the calculations. Analysis of the computational results, which included the potential energy distribution of the vibrational modes, permitted a detailed and almost complete assignment of the experimental spectrum. In addition to characteristic signals of the two main acid-base couples, CO2H/CO2- and NH3+/NH2, specific side chain contributions for these amino acids, including CCO and CCS vibrational modes were analyzed. This study is in line with the growing application of FIR measurements to biomolecules. (c) 2015 Elsevier B.V. All rights reserved.

The fate of four natural beta-triketones (leptospermone, isoleptospermone, grandiflorone and flavesone, pK(a) = 4.0-4.5) in aqueous solution, in the dark and upon simulated solar light irradiation was investigated. In anionic form, beta-triketones undergo slow dark oxidation and photolysis with polychromatic quantum yields varying from 1.2 x 10(-4) to 3.7 x 10(-4). Leptospermone and grandiflorone are the most photolabile compounds. In,molecular form, beta-triketones are rather volatile. Polychromatic quantum yields between 1.2 x 10(-3) and 1.8 x 10(-3) could be measured for leptospermone and grandiflorone. They are 3-5 times higher than for the anionic forms. Photooxidation on the carbon atom bearing the acidic hydrogen atom is the main oxidation reaction, common to all the beta-triketones whatever their ionization state. However, leptospermone shows a special photoreactivity. In molecular form, it mainly undergoes photoisomerization. Based on this work, the half-lives of beta-triketones in surface waters should be comprised between 7 and 23 days. (C) 2015 Elsevier Ltd. All rights reserved.

Water extracts from winery by-products exhibited significant plant defense inducer properties. Experiments were conducted on three marc extracts containing various amounts of polyphenols and anthocyanins. Infiltration of red, white and seed grape marc extracts into tobacco leaves induced hypersensitive reaction-like lesions with cell death evidenced by Evans Blue staining. The infiltration zones and the surrounding areas revealed accumulation of autofluorescent compounds under UV light. Leaf infiltration of the three winery by-product extracts induced defense gene expression. The antimicrobial PR1, β-1,3-glucanase PR2, and chitinase PR3 target genes were upregulated locally in tobacco plants following grape marc extract treatments. The osmotin PR5 transcripts accumulated as well in red marc extract treated-tobacco leaves. Overall, the winery by-product extracts elicited an array of plant defense responses making the grape residues a potential use of high value compounds.

Methylene violet (MV) is known for its photosensitizing properties for singlet oxygen (O-1(2)) generation upon visible-light irradiation and various examples of its potential use in photodynamic inactivation of microorganisms and for photomedicinal purposes were reported. Notwithstanding its good photosensitization properties, there is a loss of clinical tests in the recent literature, probably related to the incomplete information concerning the photophysics of this dye and the effects of the medium on its properties. We thus studied both experimentally and numerically the solvatochromic effects and the presence of acids on the absorption and fluorescence spectra of MV. In chloroform, the highly favoured and reversible formation of a mono-protonated derivative of MV, MVH+, was clearly demonstrated experimentally and supported by ab-initio calculations. In acetonitrile, the more complex experimental absorption bands can be explained by several assumptions including a thermodynamic equilibrium between MVH+ and MVH22+ or the formation of a possibly oblique dimer (MVH+)(2) induced by the formation of intermolecular hydrogen bonds. All these data point out to the high sensitivity of MV to intermolecular hydrogen bonding and to protonation, inducing a significant influence of the chemical environment on the photosensitization mechanisms of MV: from transient spectroscopy and photochemical experiments, an electron transfer side-mechanisms was shown to occur only in aprotic solvents, together with a very general and efficient singlet oxygen production whatever the solvent. MV thus represents a very good singlet oxygen sensitizer even though the influence of the chemical environment should be carefully considered for any application. Moreover, MV might be a sensitive probe for the detection of acids in organic non-protic solvents. (C) 2014 Elsevier B.V. All rights reserved.

The presence of physisorbed water during the silanization of silica is well-known for strongly influencing the silane reactivity at the interface. In this work, the reactivity of bis[3-(triethoxysilyl)propyl] tetrasulfide (TESPT), widely used in the rubber industry, on hydrated precipitation silica was investigated by time-resolved operando FTIR spectroscopy and chemometrics. The predominating reaction scheme is elucidated in conditions representative of industrial mixing process at the molecular scale. Based on multivariate curve resolution analysis and a quantitative kinetic model, it is shown that TESPT chemisorption is governed by two competitive reaction routes both producing only ethanol in the gas phase: (i) direct grafting reaction between an ethoxy moiety and a silica surface silanol and (ii) silane hydrolysis followed by co-condensation with a vicinal silane species. Reactions involving silanol-silanol condensation with production of water were not found to be significant. Although several types of water coexist on hydrated silica surface, it is demonstrated that strongly adsorbed monolayer water (E-a = 44 +/- 2 kJ mol(-1)), which represents similar to 5% w/w of the physisorbed water, is of primary importance in the hydrolysis reaction. Its relative surface concentration with respect to the amount of physisorbed silane is strongly correlated to the final ratio between co-condensation and grafting.

Photolysis may be a significant route of pesticide dissipation on crops, leading to an increase of pesticide use. Spraying strong absorbing compounds (photoprotector) along with pesticide is an attractive strategy to prevent the photodegradation phenomenon. The aim of this study is to get a better understanding of the parameters governing the photoprotection efficiency. Experiments were conducted using formulated sulcotrione as a pesticide and a grape wine extract as a photoprotector. These compounds were irradiated using simulated solar light as dried deposits on carnauba wax films or on disks of tobacco leaves and analyzed by ultra performance liquid chromatography ultraviolet (UV), spectroscopy, and microscopy. It is shown that photolysis is faster on leaves than on carnauba wax and that the photoprotection effect of grape wine extract is more efficient on leaves than on wax. Images recorded by microscopy bring evidence that deposits are very different on the two supports both in the absence and in the presence of the photoprotector. The grape wine extract plays a double role; it is antioxidant and UV screen. Photoprotection by the grape wine extract is a complex mixing of UV screen and antioxidant effects. The UV screen effect can be rationalized by considering the rate of light absorption by sulcotrione. Our results demonstrate that the rates of sulcotrione phototransformation are mainly governed by the repartition of the deposit on the solid support.

Contamination by toxic agents in the environment has become matters of concern to agricultural countries. Sulcotrione, a triketone herbicide used to control dicotyledonous weeds in maize culture is rapidly photolyzed on plant foliage and generate two main photoproducts the xanthene-1,9-dione-3,4-dihydro-6-methylsulfonyl and 2-chloro-4-mesylbenzoic acid (CMBA). The aim of this study was to analyze the potential toxicity of the herbicide and the irradiated herbicide cocktail. Cytotoxicity and genotoxicity of non irradiated and irradiated sulcotrione were investigated in Allium cepa test. The sulcotrione irradiation was monitored under sunlight simulated conditions to reach 50% of phototransformation. Concentrations of sulcotrione in the range 5 x 10(-9)-5 x 10(-5) M were tested. Cytological analysis of root tips cells showed that both non irradiated and irradiated sulcotrione caused a dose-dependent decrease of mitotic index with higher cytotoxicity for the irradiated herbicide which can lead to 24.2% reduction of mitotic index compared to water control. Concomitantly, chromosomal aberrations were observed in A. cepa root meristems. Both non irradiated sulcotrione and irradiated sulcotrione induced a dose-dependent increase of chromosomal abnormalities frequencies to a maximal value of 33.7%. A saturating effect in anomaly frequencies was observed in meristems treated with high concentrations of non irradiated sulcotrione only. These data suggest that photolyzed sulcotrione cocktail have a greater cytotoxicity and genotoxicity than parent molecule and question about the impact of photochemical process on environment. (C) 2014 Elsevier Inc. All rights reserved.

Perinaphthenone (1H-phenalen-1-one, PN) is a reference photosensitizer producing singlet oxygen with a quantum yield close to one in a large variety of solvents. It is also the basic structure of a class of photo-toxic phytoalexins. In this work, the PN photoreactivity was studied for the first time in a paraffinic wax, used as model of leaf epicuticular waxes. The PN photodegradation was monitored by UV-Vis spectroscopy. The triplet excited state, singlet oxygen and the hydroxyperinaphthenyl radical were detected by diffuse reflectance laser flash photolysis, near infrared phosphorescence and by EPR spectroscopy, respectively. The PN phototransformation was found to be fivefold faster in the wax than in n-heptane under steady-state irradiation. The hydroxyperinaphthenyl radical formation was observed in aerated irradiated paraffin wax while in n-heptane solution the radical was observed only in the absence of oxygen. These results show that under continuous irradiation, PN is much more easily phototransformed in a solid environment than in solution. Several photoproducts were identified, in particular phenalanone, PN dimers, and oxidized PN-alkanes adducts. Finally, when pyrethrum extract is added into the wax along With PN, the hydroxyperinaphthenyl radical concentration was increased by a factor of 2.4. Such photochemical reactions may occur when systemic pesticides enter the plant cuticle. (C) 2013 Elsevier B.V. All rights reserved.

Photodynamic therapy (PDT) and vascular-disrupting agents (VDA) each have their advantages in the treatment of solid tumors, but also present drawbacks. In PDT, hypoxia at the center of the tumor limits conversion of molecular oxygen into singlet oxygen, while VDAs are deficient at affecting the rim of the tumor. A phthalocyanine-chalcone conjugate combining the VDA properties of chalcones with the PDT properties of phthalocyanines was designed to address these deficiencies. Its vascular targeting, photophysical, photochemical, photodynamic activities are reported herein.

New methylene blue (NMB+) and methylene violet (MV) are known for their photosensitizing properties for singlet oxygen ((1)O2) generation upon visible-light irradiation, and various examples of their use in the photodynamic inactivation of microorganisms and for photomedicinal purposes have been reported. However, their photophysical properties have never been extensively and systematically analyzed and compared. In the current work, we studied their absorption and fluorescence behavior relative to their parent compound, methylene blue (MB+), detected the transient species generated upon excitation of the photosensitizers and determined their quantum yields of singlet oxygen production. We could measure very high quantum yields of singlet oxygen production for all the studied compounds. NMB+ appeared similar to MB+, even though it produces (1)O2 much more efficiently, and was slightly influenced by the solvent. MV, in contrast, was much more sensitive to the chemical environment, and the transient species formed upon irradiation were different in methanol and acetonitrile. It appeared to be a very good singlet oxygen sensitizer, but the influence of the chemical environment should be carefully considered for any application. The comparative characterization of these sensitizers will represent a support for the determination and the understanding of the photochemical mechanisms occurring by using these phenothiazine dyes for various photobiological applications.

The photophysical properties of several photosensitizers (PSs) included or grafted in silica monoliths were compared to their properties in solution. The effects of the solid support on their steady-state and transient absorption spectra, on their quantum yields of singlet oxygen ((1)O2) production, and on their ability to photoinduce the oxidation of dimethylsulfide (DMS) were investigated. Two cyanoanthracene derivatives (9,14-dicyanobenzo[b]triphenylene, DBTP, and 9,10-dicyanoanthracene, DCA), as well as three phenothiazine dyes (methylene blue, MB(+), new methylene blue, NMB(+), methylene violet, MV), were encapsulated in silica, analyzed and compared to two reference PSs (perinaphthenone, PN and rose bengal, RB). A DBTP derivative (3-[N-(N″-triethoxysilylpropyl-N'-hexylurea)]carboxamido-9,14-dicyanobenzo[b]triphenylene, 3) was also prepared and grafted onto silica. Thanks to the transparency and the free-standing shape of the monoliths, the complete spectroscopic characterization of the supported PSs was carried out directly at the gas-solid interface. The influence of the silica network, the PS, and the adsorption/grafting link between the PS and silica was investigated. The effects of PS concentration, gaseous atmosphere, humidity, and hydrophobicity on the production of (1)O2 were analyzed. With all PSs, (1)O2 production was very efficient (quantum yields of (1)O2 production, relative to PN, between 0.6 and 1), and this species was the only one involved in the pollutant photooxidation. The influence of the matrix on the PSs' photophysics could be considered as negligible. In contrast, the matrix effect on DMS photooxidation was extremely important: the gas diffusion inside the porous structure, and thus, the photoactivity of the materials, strictly depended on silica's surface area and porosity. Our results highlight the suitability of these silica structures as inert supports for the study of the photosensitizing properties at the gas-solid interface. Moreover, thanks to the adsorption properties of the matrix, the synthesized materials can be used as microphotoreactor for the (1)O2-mediated oxidation of volatile pollutants.