The ATLAS Level-1 Calorimeter Trigger is a hardwarebased system which aims to identify objects with high transverse momentum within an overall latency of 2.5μs. It is composed of a PreProcessor system (PPr) which digitises 7200 analogue input channels, determines the bunch crossing of the interaction, applies a digital noise filter, and provides a fine calibration; and two subsequent digital processors. The PreProcessor system needs various channel dependent parameters to be set in order to provide digital signals which are aligned in time and have proper energy calibration. The different techniques which are used to derive these parameters are described along with the quality tests of the analogue input signals.

The ATLAS experiment is preparing for data taking at 14 TeV collision energy. A rich discovery physics program is being prepared in addition to the detailed study of Standard Model processes which will be produced in abundance. The ATLAS multi-level trigger system is designed to accept one event in 2 ∣ 105 to enable the selection of rare and unusual physics events. The ATLAS calorimeter system is a precise instrument, which includes liquid Argon electro-magnetic and hadronic components as well as a scintillator-tile hadronic calorimeter. All these components are used in the various levels of the trigger system. A wide physics coverage is ensured by inclusively selecting events with candidate electrons, photons, taus, jets or those with large missing transverse energy. The commissioning of the trigger system is being performed with cosmic ray events and by replaying simulated Monte Carlo events through the trigger and data acquisition system.

The DAQ/HLT system of the ATLAS experiment at CERN, Switzerland, is being commissioned for first collisions in 2009. Presently, the system is composed of an already very large farm of computers that accounts for about one-third of its final event processing capacity. Event selection is conducted in two steps after the hardware-based Level-1 Trigger: a Level-2 Trigger processes detector data based on regions of interest (RoI) and an Event Filter operates on the full event data assembled by the Event Building system. The detector read out is fully commissioned and can be operated at its full design capacity. This places the responsibility on the High-Level Triggers system to select only events of highest physics interest that will finally reach the offline reconstruction farms. This paper brings an overview of the current ATLAS DAQ/HLT implementation and performance based on studies originated from its operation with simulated, cosmic particles and first-beam data. Its built-in event processing parallelism is presented and discussed.

The ATLAS Level-1 calorimeter trigger is a hardware-based system with the goal of identifying high-pT objects and to measure total and missing ET in the ATLAS calorimeters within an overall latency of 2.5 s. This trigger system is composed of the Preprocessor which digitises about 7200 analogue input channels and two digital processors to identify high-pT signatures and to calculate the energy sums. The digital part consists of multi-stage, pipelined custom-built modules. The high demands on connectivity between the initial analogue stage and digital part and between the custom-built modules are presented. Furthermore the techniques to establish timing regimes and verify connectivity and stable operation of these digital links will be described.

The ATLAS Level-1 Calorimeter Trigger is one of the main elements of the first stage of event selection for the ATLAS experiment at the LHC. The input stage consists of a mixed analogue/digital component taking trigger sums from the ATLAS calorimeters. The trigger logic is performed in a digital, pipelined system with several stages of processing, largely based on FPGAs, which perform programmable algorithms in parallel with a fixed latency to process about 300 Gbyte/s of input data. The real-time output consists of counts of different types of physics objects, and energy sums. The final system consists of over 300 custom-built VME modules, of several different types. The installation at ATLAS of these modules, and the necessary infrastructure, was completed at the end of 2007. The system has since undergone intensive testing, both in standalone mode, and in conjunction with the whole of the ATLAS detector in combined running. The final steps of commissioning, and experience with running the full-scale system are presented. Results of integration tests performed with the upstream calorimeters, and downstream trigger and data-flow systems, are shown, along with an analysis of the performance of the calorimeter trigger in full ATLAS data-taking. This includes trigger operation during the cosmic muon runs from before LHC start-up, and a first look at LHC proton beam data.

The ATLAS first-level calorimeter trigger is a hardware-based system designed to identify high-pT jets, electron/photon and tau candidates and to measure total and missing ET in the calorimeters. The installation of the full system of custom modules, crates and cables was completed in late 2007, but, even before the completion, it was being used as a trigger during ATLAS commissioning and integration. During 2008, the performance of the full system has been tuned during further commissioning and cosmic runs, leading to its use in initial LHC data taking. Results and analysis of the trigger performance in these runs will be presented.

The ATLAS first-level calorimeter trigger is a hardware-based system designed to identify high-pT jets, electron/photon and tau candidates and to measure total and missing ET in the ATLAS calorimeters. The complete trigger system consists of over 300 custom designed VME modules of varying complexity. These modules are based around FPGAs or ASICs with many configurable parameters, both to initialize the system with correct calibrations and timings and to allow flexibility in the trigger algorithms. The control, testing and monitoring of these modules requires a comprehensive, but well-designed and modular, software framework, which we will describe in this paper.

The detector at CERN's large hadron collider (LHC) was exposed to proton-proton collisions from beams crossing at 40 MHz. A three-level trigger system will select potentially interesting events in order to reduce this rate to 100- 200 Hz. A trigger decision is made by the Level-1 central trigger processor (CTP) reducing the incoming rate to less than 100 kHz. The Level-1 decision is based on calorimeter information and hits in dedicated muon trigger detectors. The final Level-1 trigger system is currently being installed in the experiment with completion expected in autumn 2007. Cosmic ray data are regularly recorded as an increasing fraction of the trigger system comes online. We present an overview of the Level-1 trigger system architecture and report on the installation and commissioning process at the ATLAS experimental site. Emphasis is put on the integration of the CTP with the calorimeter and muon trigger systems. We show results from analyses of cosmic ray data recorded in situ and verify, where possible, that the Level-1 trigger meets the requirements and will be ready for data taking.