We have successfully achieved selective and efficient functionalization of sheet edges in microcrystalline multilayer γ-graphyne through two methods: cross-coupling with residual bromide edge groups, and copper-catalyzed azide-alkyne cycloaddition (CuAAC) with edge terminal alkyne groups. This modification significantly enhances the ease of mechanical exfoliation and dispersibility of the sheets of γ-graphyne. Specifically, C18-grafted γ-graphyne forms stable dispersions in compatible organic solvents, allowing for the imaging of atomically thin layers of γ-graphyne for the first time. Additionally, we have discovered that phenylacetylide edge groups alter the preferred stacking mode of γ-graphyne sheets. Few-layer flakes of Ph-edge γ-graphyne exhibit a preference for the symmetric R3m space group, contrasting with the aperiodic stacking of as-synthesized Br-edge γ-graphyne. These results open the door for an easy and scalable exfoliation of few-layer flakes of γ-graphyne with a high aspect ratio, enabling potential applications in carbon electronics.

Preserving vanadium in a high oxidation state during chemical transformations can be challenging due to the oxidizing nature of V(+5) species. Oxo and similar isoelectronic ligands have been utilized to stabilize V(+5) by extensive π-donation. However, decreasing the bond order between V and the oxo ligand often results in a reduction of the metal center. Herein, we report a unique transformation involving anionic V(+5) alkylidene that converts a V(+5) oxo complex to a V(+5) alkylidyne in three steps without altering the oxidation state of the metal center. This method has been used to obtain rare 3d Schrock carbynes, which provide easy and scalable access to V(+5) alkylidynes.

Ring-opening metathesis polymerization (ROMP) with vanadium(V) alkylidene initiators bearing diverse ligand sets is presented, along with analyses of factors governing the activity and kinetics for each. The first DFT calculations on ROMP with vanadium are executed and show that non-covalent interactions between supporting ligands and the alkylidene have drastic effects on rates of initiation and propaga-tion, specifically with both stabilizing and destabilizing interactions occurring in transition states. This allows for rationalization of the kinetics inferred from the molar mass distributions. Furthermore, we demonstrate that the metallocyclobutane forms in a manner quite distinct from group 6 analogues. NMR experiments empirically support the computational findings and allow for important insights for future initiator design. Termination of growing polymer chains is shown to not play any role in the observed broad molar mass distributions, which has been assumed but not proven experimentally until now, and for the first time with vanadium the syn-alkylidenes are shown experimentally to be less reactive than their anti-counterparts, analogous to group 6 alkylidenes. Functional group tolerance, which has yet to be investigated in ROMP with vanadium-based initiators, is also explored for each class of initiators. In general, the more electron poor chlorido ligated complexes were less tolerant to functional groups.Published by Elsevier B.V.

The reaction between silylamido complexes of Cr(II), Fe(II), and Co(II) and IMes·2HF salt in the presence of IMes (IMes = 1,3-dimesitylimidazol-2-ylidene) led to isolation of Cr(IMes)2F2 (2-Cr), Fe(IMes)2F2 (2-Fe), and Co(IMes)2F2 (2-Co). X-ray structural studies revealed that 2-Cr adopts square planar geometry, while 2-Fe and 2-Co have distorted tetrahedral geometry. Magnetic susceptibility studies of 2-Cr, 2-Fe, and 2-Co were consistent with high-spin complexes, S = 2 for 2-Cr/2-Fe and S = 3/2 for 2-Co. We demonstrated that fluoride can be successfully exchanged for cyanide and azide using trimethylsilyl cyanide and trimethylsilyl azide (3-Fe and 4-Fe). DFT studies suggest that the preference of 2-Cr to adopt square planar geometry over tetrahedral is due to its d4 metal center, where four electrons fill the lower-lying d-orbitals.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

Vanadium bis-phosphine imido and oxo chloride alkylidenes have been extensively applied in the ring-closing metathesis of various acyclic olefins. However, their reactions involving ethylene have shown limited productivity due to rapid decomposition. The primary degradation pathway involving V bis-phosphine imido complexes is β-H elimination at an unsubstituted metallacyclobutane. In contrast, β-H elimination is disfavored for V oxo species, but bimolecular decomposition precludes its high productivity. Herein, we present the synthesis of V imido NHC complexes that are the most productive V catalysts toward various terminal olefins in ring-closing metathesis reactions. Experimental and computational studies suggest that β-H elimination and bimolecular decomposition are disfavored for V imido NHC complexes.

V imido NHC phosphine alkylidenes are the most efficient V catalysts for ring-closing olefin metathesis of various terminal dienes. The presence of imido and phosphine ligands is responsible for catalyst decomposition. Therefore, the development of phosphine-free V oxo NHC alkylidenes is a logical next step to further improve V -based olefin metathesis. Herein we report V oxo NHC chloride and alkoxide alkylidenes and their reactivity in olefin metathesis. V oxo NHC chloride is readily involved in cycloaddition/cycloreversion steps with olefins. However, a remarkable preference for the formation of a 1,3-metallacyclobutane (MCB) leads to exclusive methylene group exchange (degenerate metathesis) utilized for carbon isotope exchange. DFT studies further support the preference for the 1,3-MCB formation.

Aptamers are promising biorecognition elements for sensors. However, aptamer-based assays often lack the requisite levels of sensitivity and/or selectivity because they typically employ structure-switching aptamers with attenuated affinity and/or utilize reporters that require aptamer labeling or which are susceptible to false positives. Dye-displacement assays offer a label-free, sensitive means for overcoming these issues, wherein target binding liberates a dye that is complexed with the aptamer, producing an optical readout. However, broad utilization of these assays has been limited. Here, we demonstrate a rational approach to develop colorimetric cyanine dye-displacement assays that can be broadly applied to DNA aptamers regardless of their structure, sequence, affinity, or the physicochemical properties of their targets. Our approach should accelerate the development of mix-and-measure assays that could be applied for diverse analytical applications.

Vanadium-based catalysts have shown activity and selectivity in ring-opening metathesis polymerization of strained cyclic olefins comparable to those of Ru, Mo, and W catalysts. However, the application of V alkylidenes in routine organic synthesis is limited. Here, we present the first example of ring-closing olefin metathesis catalyzed by well-defined V chloride alkylidene phosphine complexes. The developed catalysts exhibit tolerance to various functional groups, such as an ether, an ester, a tertiary amide, a tertiary amine, and a sulfonamide. The size and electron-donating properties of the imido group and the phosphine play a crucial role in the stability of active intermediates. Reactions with ethylene and olefins suggest that both beta-hydride elimination of the metallacyclobutene and bimolecular decomposition are responsible for catalyst degradation.

V imido alkylidenes have been applied for the ringopening metathesis polymerization involving cyclic olefins. However, those complexes found limited application in reactions with acyclic terminal olefins due to instability toward ethylene. Experimental and theoretical studies show that the beta-hydride elimination from unsubstituted metallacyclobutene is the primary decomposition pathway in those systems. Herein, we report the synthesis of the first catalytically active V oxo alkylidene, VO(CHSiMe3)(PEt3)(2)Cl, which exhibits the highest reported productivity with various terminal olefins in ring-closing metathesis reactions among known V catalysts. Presented DFT studies indicate that beta-hydride elimination is significantly disfavored for V oxo species.

Catalytic olefin metathesis based on the second- and third-row transition metals has become one of the most powerful transformations in modern organic chemistry. The shift to first-row metals to produce fine and commodity chemicals would be an important achievement to complement existing methods with inexpensive and greener alternatives. In addition, those systems can offer unusual reactivity based on the unique electronic structure of the base metals. In this Minireview, we summarize the progress of the development of alkylidenes and metallacycles of first-row transition metals from scandium to nickel capable of performing cycloaddition and cycloreversion steps, crucial reactions in olefin metathesis. In addition, we will discuss systems capable of performing olefin metathesis; however, the nature of active species is not yet known.

The molybdenum benzylidynes [ArC Mo(OC(CF3)(2)CH3)(3)(1,2-dimethoxyethane)], where Ar = Ph (2a), p-(OCH3)C6H4 (2b), p-(CF3)C6H4 (2c), p-(NO2)C6H4 (2d), or 4-(NO2)-3-(CF3)C6H3 (2e), and [p-(NO2)C6H4C Mo(OC(CF3)(2)CH3)(3)] (2f) catalyze the ring-closing metathesis (RCM) reaction of diallyl N-tosylamide (3) to produce 1-tosyl-2,5-dihydro-1H-pyrrole (4) and ethylene. The scope of RCM catalytic activity of 2e, cross-metathesis of 1-hexene, and ring-opening metathesis polymerization of cyclooctene were explored. The X-ray crystal structure of 2e was determined. Variable-temperature H-1 NMR spectra revealed the formation of intermediates during the reaction of 3 with 2f and the reforming of 2f after completion of the reaction. The use of C-13-labeled Mo benzylidyne did not show transfer of the carbon atom next to Mo to any of the products.

Developing well-defined iron-based catalysts for olefin metathesis would be a breakthrough achievement in the field not only to replace existing catalysts by inexpensive metals but also to attain a new reactivity taking advantage of the unique electronic structure of the base metals. Here, we present a two-coordinate homoleptic iron complex, Fe(HMTO)2 [HMTO=O-2,6-(2,4,6-Me3 C6 H2 )2 C6 H3 ], that is capable of performing ring-opening metathesis polymerization of norbornene to produce highly stereoregular polynorbornene (99 % cis, syndiotactic). The use of heteroleptic Fe(HMTO)(RO) [RO=(CH3 )2 CF3 CO, CH3 (CF3 )2 CO, or Ph(CF3 )2 CO] prepared in situ significantly increases the polymerization rate while preserving selectivity. The resulting polymers were characterized by 1 H and 13 C NMR spectroscopy and gel-permeation chromatography.

The reaction between Mo(O)(CHAro)(ORF6)2(PMe3) (Aro = ortho-methoxyphenyl, ORF6 = OCMe(CF3)2) and 2 equiv of LiOHMT (OHMT = O-2,6-(2,4,6-Me3C6H2)2C6H3) leads to Mo(O)(CHAro)(OHMT)2, an X-ray structure of which shows it to be a trigonal bipyramidal anti benzylidene complex in which the o-methoxy oxygen is coordinated to the metal trans to the apical oxo ligand. Addition of 1 equiv of water (in THF) to the benzylidyne complex, Mo(CArp)(OR)3(THF)2 (Arp = para-methoxyphenyl, OR = ORF6 or OC(CF3)3 (ORF9)) leads to formation of {Mo(CArp)(OR)2(μ-OH)(THF)}2(μ-THF) complexes. Addition of 1 equiv of a phosphine (L) to Mo(CArp)(ORF9)3(THF)2 in THF, followed by addition of 1 equiv of water, all at room temperature, yields Mo(O)(CHArp)(ORF9)2(L) complexes in good yields for several phosphines (e.g., PMe2Ph (69% by NMR), PMePh2 (59%), PEt3 (69%), or P( i-Pr)3 (65%)). The reaction between Mo(O)(CHArp)(ORF9)2(PEt3) and 2 equiv of LiOHMT proceeds smoothly at 90 °C in toluene to give Mo(O)(CHArp)(OHMT)2, a four-coordinate syn alkylidene complex. Mo(O)(CHArp)(OHMT)2 reacts with ethylene (1 atm in C6D6) to give (in solution) a mixture of Mo(O)(CHArp)(OHMT)2, Mo(O)(CH2)(OHMT)2, and an unsubstituted square pyramidal metallacyclobutane complex, Mo(O)(CH2CH2CH2)(OHMT)2, along with ethylene and ArpCH═CH2. Mo(O)(CHArp)(OHMT)2 also reacts with 2,3-dicarbomethoxynorbornadiene to yield syn and anti isomers of the "first-insertion" products that contain a cis C═C bond.

Addition of one equiv of water to Mo(CAr)[OCMe(CF3)2]3(1,2-dimethoxyethane) (2, Ar = o-(OMe)C6H4) in the presence of PPhMe2 leads to formation of Mo(O)(CHAr)[OCMe(CF3)2]2(PPhMe2) (3(PPhMe2)) in 34% yield. Addition of one equiv of water alone to 2 produces the dimeric alkylidyne hydroxide complex, {Mo(CAr)[OCMe(CF3)2]2(μ-OH)}2(dme) (4(dme)) in which each bridging hydroxide proton points toward an oxygen atom in an arylmethoxy group. Addition of PMe3 to 4(dme) gives the alkylidene oxo complex, (3(PMe3)), an analogue of 3(PPhMe2) (95% conversion, 66% isolated). Treatment of 3(PMe3) with two equiv of HCl gave Mo(O)(CHAr)Cl2(PMe3) (5), which upon addition of LiO-2,6-(2,4,6-i-Pr3C6H2)2C6H3 (LiOHIPT) gave Mo(O)(CHAr)(OHIPT)Cl(PMe3) (6). Compound 6 in the presence of B(C6F5)3 will initiate the ring-opening metathesis polymerization of cyclooctene, 5,6-dicarbomethoxynorbornadiene (DCMNBD), and rac-5,6-dicarbomethoxynorbornene (DCMNBE), and the homocoupling of 1-decene to 9-octadecene. The poly(DCMNBD) has a cis,syndiotactic structure, whereas poly(DCMNBE) has a cis,syndiotactic,alt structure. X-ray structures were obtained for 3(PPhMe2), 4(dme), and 6.

A "double benzyne" reaction between 1,3-dichloro-2-iodobenzene and 2,4,6-t-Bu3C6H2MgBr followed by the addition of iodine led to 2,6-(2,4,6-t-Bu3C6H2)2C6H3I (HTBTI) in 65% yield. Lithiation of HTBTI with Li-t-Bu gave Li(Et2O)2HTBT from which HTBTSH, HTBTN3, HTBTNH2, and HTBTOH were prepared. An X-ray structure of W(OHTBT)2Cl4 shows that the two HTBTO ligands are trans to one another with the t-Bu3C6H2 groups on one HTBTO interdigitated with the t-Bu3C6H2 groups on the other HTBTO.

Reactions between Mo(N-t-Bu)2(CH2-t-Bu)2 or Mo(NAdamantyl)2(CH2CMe2Ph)2 and 3 equiv of HCl in the presence of 1 equiv of PPh2Me yield Mo(NR)(CHR')(PPh2Me)Cl2 complexes, from which Mo(NR)(CHR')(PPh2Me)(OAr)Cl complexes (OAr = a 2,6-terphenoxide) can be prepared. The Mo(NR)(CHR')(PPh2Me)(OAr)Cl complexes were evaluated as cross-metathesis catalysts between cyclooctene and Z-1,2-dichloroethylene. The efficiencies of the test reaction for complexes in which OAr = OTPP, OHMT, OHIPT, or OHTBT (where OTPP is 2,3,5,6-tetraphenylphenoxide, OHMT is hexamethylterphenoxide, OHIPT is hexaisopropylterphenoxide, and OHTBT is hexa-t-butylterphenoxide) maximize when OAr is OHMT or OHIPT. Mo(N-t-Bu)(CH-t-Bu)(PPh2Me)Cl2 is essentially inactive for the reaction between cyclooctene and Z-1,2-dichloroethylene. X-ray structural studies were carried out on Mo(NAd)(CHCMe2Ph)(PPh2Me)Cl2, Mo(N-t-Bu)(CH-t-Bu)(PPh2Me)(OHMT)Cl, Mo(NAd)(CHCMe2Ph)(Cl)(OHTBT)(PMe3), and [Mo(NAd)(CHCMe2Ph)(PMe3)(Cl)]2(μ-O), the product of the reaction between Mo(NAd)(CHCMe2Ph)(Cl)(OHTBT)(PMe3) and 0.5 equiv of water.

A strategy for arraying small gold nanoparticles on a mesoporous support modified with single-component or mixed self-assembled monolayers is described. The use of mixed surface modifiers allows easy access to a range of surface chemistries and modalities of interaction between nanoparticles and supports. A combination of thiol groups and linear semifluorinated chains effectively stabilized the nanoparticles against aggregation, while preserving their catalytic activity. The thiol-fluorous-supported catalyst was found active in Ullmann-type homocoupling of aryl halides and showed exceptional selectivity in this reaction.

An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.